Test Report

FCC ID: PH7MV420A

Test Report

Download: PDF
FCCID_991482

L«CT HCT CO., LTD. Product Compliance Division TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATE OF COMPLIANCE FCC Part22 Certification Applicant Name: AXESSTEL INC. Date of Testing: July 14, 2008 Address: Test Site/Location: 6815 Flanders Drive Ste.210 San Diego, HCT.CO., LTD., San 136—1 Ami—ri, Bubal—eup, Icheon—si, CA 92121, U.S.A Kyungki—do, Korea Test Report No.: HCT—RO8—089 HCT FRN: 0005866421 FCC ID PH7ZMV420A APPLICANT AXESSTEL INC. Application Type: Certification FCC Classification: Non—Broadcast Base Station Transmitter FCC Rule Part(s): §22, §2 EUT Type: Cellular CDMA Wireless Gateway with WLAN Model(s): MV420A Tx Frequency: 824.70 — 848.31 MHz (CDMA) Rx Frequency: 869.70 — 893.31 MHz (CDMA) Max. RF Output Power: 0.308 W ERP CDMA ( 24.88 dBm) 0.305 W ERP CDMA EVDO ( 24.84 dBm) Emission Designator(s): 1M27F9W (CDMA), 1M27FIW (CDMA EVDO) The measurements shown in this report were made in accordance with the procedures specified in §2.947. | assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. HCT.CO., LTD. Certifies that no party to this application has been denied FCC benefits pursuant to section 5301 of the Anti—Drug Abuse Act of 1998,21 U.S. C.853(a) lin Seor Jng 52—% Ta kc Report prepared by : Youn Seok Jung : Sang Jun Lee Test engineer of RF Part Manager of RF Part This report only respondsto the tested sample and may not be reproduced, except in full, without written approval of the HCT Co., Ltd. FCC Part22 Permissive Change Class II www.het.co.kr Test Report No. Test Dates: EUT Type: FCC ID: p 1 of 22 HCT—RO8—089 July 14, 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A age o

Table of Contents 1. GENERAL INFORMATION ..........................................................................................................................３ 2. INTRODUCTION ..........................................................................................................................................４ 2.1. EUT DESCRIPTION...........................................................................................................................４ 2.2. MEASURING INSTRUMENT CALIBRATION...................................................................................４ 2.3. TEST FACILITY .................................................................................................................................４ 3. DESCRIPTION OF TESTS ..........................................................................................................................５ 3.1 Effective Radiated Power/Equivalent Isotropic Radiated Power..................................................５ 3.2 Occupied bandwidth. ........................................................................................................................６ 3.3 Spurious and Harmonic Emissions at Antenna Terminal.............................................................６ 3.4 Radiated Spurious and Harmonic Emissions ................................................................................７ 3.5 Frequency stability / variation of ambient temperature ................................................................８ 5. SUMMARY OF TEST RESULTS ............................................................................................................. １０ 6. SAMPLE CALCULATION ........................................................................................................................ １１ 7. TEST DATA .............................................................................................................................................. １２ 7.1 Conducted Output Power ............................................................................................................. １２ 7.2 Effective Radiated Power Output(CDMA) ................................................................................... １３ 7.3 Radiated Spurious Emissions(CDMA Mode).............................................................................. １４ 7.4 Frequency stability / variation of ambient temperature ............................................................ １５ 7.4.1 FREQUENCY STABILITY (CDMA)...................................................................................... １５ 8. TEST PLOTS............................................................................................................................................ １６ FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ２ of 22

MEASUREMENT REPORT 1. GENERAL INFORMATION Applicant Name: AXESSTEL INC. Address: 6815 Flanders Drive Ste.210 San Diego, CA 92121, U.S.A Contact: Tel: 858- 625-2100 Fax: 858- 625- 2110 E-Mail: dskim@axesstel.com FCC ID: PH7MV420A Application Type: FCC Part22 Permissive Change Class II FCC Classification: Non-Broadcast Base Station Transmitter FCC Rule Part(s): §22, §2 EUT Type: Cellular CDMA Wireless Gateway with WLAN Model(s): MV420A Tx Frequency: 824.70 — 848.31 MHz (CDMA) Rx Frequency: 869.70 — 893.31 MHz (CDMA) Max. RF Output Power: 0.308 W ERP CDMA ( 24.88 dBm) / 0.305 W ERP CDMA EVDO ( 24.84 dBm) Emission Designator(s): 1M27F9W (CDMA) / 1M27F9W (CDMA EVDO) Antenna Specification Manufacturer: Hankook Antenna Co.,LTD Antenna type: sleeve dipole antenna Peak Gain: 0 dBi Date(s) of Tests: July 14. 2008 Place of Tests: HCT.CO., LTD. San 136-1 Ami-ri, Bubal-eup, Icheon-si, Report Serial No HCT-R08-089 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ３ of 22

2. INTRODUCTION 2.1. EUT DESCRIPTION AXESSTEL INC. Cellular CDMA Wireless Gateway with WLAN consists of CDMA and Wireless LAN(802.11b/g) 2.2. MEASURING INSTRUMENT CALIBRATION The measuring equipment, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. 2.3. TEST FACILITY The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, Maekok-Ri, Hobup-Myun, Ichon-Si, Kyoungki-Do, 467-701, KOREA. The site is constructed in conformance with the requirements of ANSI C63.4 and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated July 6, 2006(Registration Number: 90661) FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ４ of 22

3. DESCRIPTION OF TESTS 3.1 Effective Radiated Power/Equivalent Isotropic Radiated Power Test Set-up Test Procedure Radiated emission measurements were performed at an open Site. The equipment under test is placed on a wooden turntable 3-meters from the receive antenna. A wooden turntable was rotated 360° and the receiving antenna scanned from 1-4m in order to capture the maximum emission. A half wave dipole was substituted in place of the EUT. This dipole antenna was driven by a signal generator and the previously recorded signal was duplicated. The maximum EIRP was calculated by adding the forward power to the calibrated source plus its appropriate gain value. These steps were carried out with the receiving antenna in both vertical and horizontal polarization. For readings above 1GHz, the above procedure is repeated using horn antennas and the difference between the gain of the horn and an isotropic antenna are taken into consideration. FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ５ of 22

3.2 Occupied bandwidth. Test set-up Wireless Communication Spectrum Analyzer Test Set (E5515C) EUT Power Divider (Configuration of conducted Emission measurement) Test Procedure The EUT was setup to maximum output power at its lowest channel. The occupied bandwidth was measured using a spectrum analyzer. The measurements are repeated for the highest and a middle channel. The EUT’s occupied bandwidth is measured as the width of the signal between two points, one below the carrier center frequency and one above the carrier frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. Plots of the EUT’s occupied bandwidth are shown herein. 3.3 Spurious and Harmonic Emissions at Antenna Terminal. Test Procedure The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The EUT was setup to maximum output power at its lowest channel. The Resolution BW of the analyzer is set to 1 % of the emission bandwidth to show compliance with the – 13 dBm limit, in the 1 MHz bands immediately outside and adjacent to the edge of the frequency block. The 1 MHz RBW was used to scan from 30 MHz to 10 GHz. A display line was placed at – 13 dBm to show compliance. The high, lowest and a middle channel were tested for out of band measurements. FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ６ of 22

3.4 Radiated Spurious and Harmonic Emissions Test Set-up The measurement facilities used for this test have been documented in previous filings with the commission pursuant to section § 2.948. The open field test site is situated in open field with ground screen whose site attenuation characteristics meet ANSI C63.4 –2003. A mast capable of lifting the receiving antenna from a height of one to four meters is used together with a rotatable wooden platform mounted at three from the antenna mast. 1) The unit mounted on a wooden table 1.5 m × 1.0 m × 0.80 m is 0.8 meter above test site ground level. 2) During the emission test, the turntable is rotated and the EUT is manipulated to find the configuration resulting in maximum emission under normal condition of installation and operation. 3) The antenna height and polarization are also varied from 1 to 4 meters until the maximum signal is found. 4) The spectrum shall be scanned up to the 10th harmonic of the fundamental frequency. Test Procedure The equipment under test is placed on a wooden turntable 3-meters from the receive antenna. A wooden turntable was rotated 360° and the receiving antenna scanned from 1-4m in order to capture the maximum emission. A half wave dipole was substituted in place of the EUT. This dipole antenna was driven by a signal generator and the previously recorded signal was duplicated. The maximum EIRP was calculated by adding the forward power to the calibrated source plus its appropriate gain value. These steps were carried out with the receiving antenna in both vertical and horizontal polarization. For readings above 1GHz, the above procedure is repeated using horn antennas and the difference between the gain of the horn and an isotropic antenna are taken into consideration. FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ７ of 22

3.5 Frequency stability / variation of ambient temperature Test Set-up Temperature Chamber Wireless Communication EUT Test Set (E5515C) Power Supply * Nominal Operating Voltage Test Procedure The frequency stability of the transmitter is measured by: a.) Temperature: The temperature is varied from - 30 °C to + 50 °C using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from battery end point to 115 % of the voltage normally at the input to the device or at the power supply terminals if cables are not normally supplied. Specification — the frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within ± 0.000 25 %(± 2.5 ppm) of the center frequency. Time Period and Procedure: The carrier frequency of the transmitter is measured at room temperature (20°C to provide a reference). 1. The equipment is turned on in a “standby” condition for one minute before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 2. Frequency measurements are made at 10°C intervals ranging from -30°C to +50°C. A period of at least one half- hour is provided to allow stabilization of the equipment at each temperature level. NOTE: The EUT is tested down to the battery endpoint. FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ８ of 22

4. LIST OF TEST EQUIPMENT Serial Calibration Calibration Manufacture Model/ Equipment Number Interval Due R&S ESI40/ Spectrum Analyzer 831564/003 Annual 11/06/2008 Agilent E4419B/ Power Meter MY41291386 Annual 11/05/2008 Agilent 8481A/ Power Sensor MY41090870 Annual 11/05/2008 Agilent HP8901B/ Modulation Analyzer 3438A05231 Annual 08/04/2008 Agilent 8903A/ Audio Analyzer 2433A04322 Annual 08/04/2008 R&S CMU200/ Base Station 110740 Annual 07/26/2008 Agilent 8960 (E5515C)/ Base Station GB444400269 Annual 02/11/2009 Tescom TC-3000/ Bluetooth Simulator 3000A4900112 Annual 01/11/2009 MITEQ AMF-6D-01180-35-20P/ AMP 990893 Annual 01/15/2009 Wainwright WHK1.2/15G-10EF/H.P.F 2 Annual 06/28/2009 Wainwright WHK3.3/18G-10EF/H.P.F 1 Annual 06/28/2009 Agilent 778D/ Dual Directional Coupler 16072 Annual 11/09/2008 Agilent 1506A/ Power Divider 99441 Annual 11/10/2008 Digital EP-3010/ Power Supply 3110117 Annual 12/29/2008 Schwarzbeck UHAP/ Dipole Antenna 630 Annual 11/13/2008 Schwarzbeck UHAP/ Dipole Antenna 605 Annual 11/13/2008 R&S HFH2-Z2/ Loop Antenna 881056/070 Annual 12/11/2008 Korea Engineering KR-1005L / Chamber KRAB07063-2CH Annual 01/05/2009 Schwarzbeck VULB9160/ TRILOG Antenna 3150 Biennial 04/20/2009 Schwarzbeck VULB9160/ TRILOG Antenna 3125 Biennial 05/16/2009 Schwarzbeck BBHA 9120D/ Horn Antenna 147 Biennial 03/26/2010 Schwarzbeck BBHA 9120D/ Horn Antenna 1201 Biennial 05/02/2009 Agilent E4440A/Spectrum Analyzer US45303008 Annual 01/08/2009 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ９ of 22

5. SUMMARY OF TEST RESULTS FCC Part Test Test Description Test Limit Test Result section(s) Condition 2.1049, 22.917(a), Occupied Bandwidth N/A PASS Band Edge / Spurious and < 43 + log10 (P[Watts]) at 2.1051, 22.917(a), Harmonic Emissions at Band Edge and for all PASS Antenna Terminal. out-of-band emissions CONDUCTED 2.1046 Conducted Output Power N/A PASS Frequency stability / variation of 2.1055, 22.355 < 2.5 ppm PASS ambient temperature Effective Radiated Power < 7 Watts max. ERP PASS 22.913(a)(2) Equivalent Isotropic Radiated Power < 2 Watts max. EIRP RADIATED PASS Radiated Spurious and < 43 + log10 (P[Watts]) for 2.1053, 22.917(a) PASS Harmonic Emissions all out-of band emissions FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １０ of 22

6. SAMPLE CALCULATION A. ERP Sample Calculation Ch./ Freq. Measured Substitude ERP Mode Ant. Gain C.L Pol. channel Freq.(MHz) Level(dBm) LEVEL(dBm) W dBm CDMA 384 836.52 -13.03 22.74 2.50 1.19 H 0.25 24.05 ERP = SubstitudeLEVEL(dBm) + Ant. Gain – CL(Cable Loss) 1) The EUT mounted on a wooden tripod is 0.8 meter above test site ground level. 2) During the test , the turn table is rotated and the antenna height is also varied from 1 to 4 meters until the maximum signal is found. 3) Record the field strength meter’s level. 4) Replace the EUT with dipole/Horn antenna that is connected to a calibrated signal generator. 5) Increase the signal generator output till the field strength meter’s level is equal to the item (3). 6) The signal generator output level with Ant. Gain and cable loss are the rating of effective radiated power (ERP). B. Emission Designator CDMA Emission Designator Emission Designator = 1M29F9W CDMA BW = 1.29 MHz F = Frequency Modulation 9 = Composite Digital Info W = Combination (Audio/Data) (Measured at the 99% power bandwidth) FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １１ of 22

7. TEST DATA 7.1 Conducted Output Power A base station simulator was used to establish communication with the EUT. The base station simulator parameters were set to produce the maximum power from the EUT. This device was tested under all configurations and the highest power is reported. Conducted Output Powers of EUT are reported below. Wireless Communication Power Meter Test Set (E5515C) EUT Power Divider TDSO 1xEvDO 1xEvDO 1xEvDO 1xEvDO SO2 SO2 SO55 SO55 SO32 Rev.0 Rev.0 Rev.1 Rev.1 MODE CHANNEL RC1/1 RC3/3 RC1/1 RC3/3 RC3/3 (FTAP) (RTAP) (FETAP) (RETAP) (dBm) (dBm) (dBm) (dBm) (dBm) (dBm) (dBm) (dBm) (dBm) 1013 23.36 23.32 23.35 23.32 23.30 23.85 23.83 23.84 23.78 CDMA 384 23.40 23.32 23.35 23.29 23.30 23.95 23.96 23.91 23.86 777 23.30 23.21 23.32 23.21 23.20 23.75 23.75 23.85 23.78 (Maximum Conducted Output Powers) FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １２ of 22

7.2 Effective Radiated Power Output(CDMA) (CDMA Mode) Ch./ Freq. Substitude ERP Measured Mode LEVEL Ant. Gain C.L Pol. channel Freq.(MHz) Level(dBm) W dBm (dBm) 1013 824.70 -13.52 32.31 -8.31 1.17 H 0.19 22.83 CDMA 384 836.52 -12.20 34.29 -8.22 1.19 H 0.31 24.88 777 848.31 -13.12 34.01 -8.13 1.20 H 0.29 24.68 EVDO 384 836.52 -12.96 34.25 -8.22 1.19 H 0.30 24.84 Note: Standard batteries are the only options for this phone NOTES: Effective Radiated Power Output Measurements by Substitution Method according to ANSI/TIA/EIA-603-C-2004, Aug. 17, 2004: The EUT was placed on a wooden turn table 3-meters from the receive antenna. The receive antenna height and turntable rotation was adjusted for the highest reading on the receive spectrum analyzer. For CDMA signals, a peak detector is used, with RBW = VBW = 3 MHz. For WCDMA signals, a peak detector is used, with RBW = VBW = 5MHz. For AMPS, GSM, and NADC TDMA signals, a peak detector is used, with RBW = VBW = 1 MHz. A half-wave dipole was substituted in place of the EUT. This dipole antenna was driven by a signal generator and the level of the signal generator was adjusted to obtain the same receive spectrum analyzer reading. The conducted power at the terminals of the dipole is measured. The ERP is recorded. This device was tested under all configurations and the highest power is reported. FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １３ of 22

7.3 Radiated Spurious Emissions(CDMA Mode) ▣ MEASURED OUTPUT POWER: 24.88 dBm = 0.308 W ▣ MODULATION SIGNAL: CDMA ▣ DISTANCE: 3 meters ▣ LIMIT: - (43 + 10 log10 (W)) = -37.88 dBc Substitute Measured Level ERP Ch. Freq.(MHz) Ant. Gain Level C.L Pol. dBc [dBm] (dBm) [dBm] 1,649.40 -32.49 7.09 -43.02 1.73 H -37.66 -62.54 1013 2,474.10 -45.93 8.12 -53.04 2.28 H -47.20 -72.08 3,298.80 -44.46 9.72 -52.04 2.57 H -44.89 -69.77 1,673.04 -32.03 7.23 -42.79 1.79 H -37.35 -62.23 384 2,509.56 -42.24 8.14 -49.37 2.33 H -43.56 -68.44 3,346.08 -46.09 9.99 -54.12 2.66 H -46.79 -71.67 1,696.62 -28.93 7.41 -39.54 1.83 H -33.96 -58.84 777 2,544.93 -37.30 8.21 -44.58 2.34 H -38.71 -63.59 3,393.24 -45.03 9.91 -52.66 2.85 H -45.60 -70.48 NOTES: Radiated Spurious Emission Measurements at 3 meters by Substitution Method according to ANSI/TIA/EIA-603-C-2004, Aug. 17, 2004: FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １４ of 22

7.4 Frequency stability / variation of ambient temperature 7.4.1 FREQUENCY STABILITY (CDMA) OPERATING FREQUENCY: 836,600,000 Hz CHANNEL: 384 REFERENCE VOLTAGE: 7.4 VDC DEVIATION LIM IT: ± 0.000 25 % or 2.5 ppm Voltage Power Temp. Frequency Frequency Deviation ppm (%) (VDC) (℃) (Hz) Error (Hz) (%) 100% +20(Ref) 836 519 994 -6 -0.000 001 -0.007 100% -30 836 520 011 11 0.000 001 0.013 100% -20 836 519 985 -15 -0.000 002 -0.018 100% -10 836 520 023 23 0.000 003 0.027 100% 0 836 519 983 -17 -0.000 002 -0.020 7.400 100% +10 836 520 032 32 0.000 004 0.038 100% +20 836 519 981 -19 -0.000 002 -0.023 100% +30 836 520 026 26 0.000 003 0.031 100% +40 836 520 039 39 0.000 005 0.047 100% +50 836 520 024 24 0.000 003 0.029 115% 8.510 +20 836 519 990 -10 -0.000 001 -0.012 Batt. Endpoint 6.290 +20 836 520 021 21 0.000 003 0.025 Fre qu e nc y S tability 3.5 2.5 1.5 Deviation (ppm) 0.5 -0.5 -1.5 -2.5 -3.5 +20(Ref) -20 0 +20 +40 +20 Temperature (℃) FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １５ of 22

8. TEST PLOTS FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １６ of 22

■ CDMA MODE (1013CH.)Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz 17.24 dBm Ref 24 dBm * Att 20 dB SWT 10 ms 824.736000000 MHz Offset 26.4 dB OBW 1.272000000 MHz 20 1 Temp 1 [T1 OBW] 7.80 dBm A T1 T2 824.070000000 MHz 10 1 PK Temp 2 [T1 OBW] VIEW 8.66 dBm 0 825.342000000 MHz LVL -10 -20 PRN -30 -40 -50 -60 -70 Center 824.7 MHz 300 kHz/ Span 3 MHz Date: 14.JUL.2008 17:14:59 ■ CDMA MODE (348CH.)Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz 18.08 dBm Ref 23.5 dBm * Att 20 dB * SWT 200 ms 836.184000000 MHz Offset 26.4 dB 1 OBW 1.266000000 MHz 20 Temp 1 [T1 OBW] 9.19 dBm A T1 T2 10 835.890000000 MHz 1 PK Temp 2 [T1 OBW] VIEW 9.15 dBm 0 837.156000000 MHz LVL -10 -20 PRN -30 -40 -50 -60 -70 Center 836.52 MHz 300 kHz/ Span 3 MHz Date: 14.JUL.2008 16:37:59 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １７ of 22

■ CDMA MODE (777CH.)Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz 17.48 dBm Ref 23.5 dBm * Att 20 dB * SWT 200 ms 848.556000000 MHz Offset 26.4 dB 1 OBW 1.272000000 MHz 20 Temp 1 [T1 OBW] 9.45 dBm A T1 T2 10 847.674000000 MHz 1 PK Temp 2 [T1 OBW] VIEW 9.67 dBm 0 848.946000000 MHz LVL -10 -20 PRN -30 -40 -50 -60 -70 Center 848.31 MHz 300 kHz/ Span 3 MHz Date: 14.JUL.2008 16:38:39 ■ CDMA EVDO MODE (384CH.)Occupied Bandwidth * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz 18.36 dBm Ref 24 dBm * Att 20 dB SWT 10 ms 836.802000000 MHz Offset 26.4 dB 1 OBW 1.266000000 MHz 20 Temp 1 [T1 OBW] 9.50 dBm A T1 T2 835.890000000 10 MHz 1 PK Temp 2 [T1 OBW] VIEW 8.65 dBm 0 837.156000000 MHz LVL -10 -20 PRN -30 -40 -50 -60 -70 Center 836.52 MHz 300 kHz/ Span 3 MHz Date: 14.JUL.2008 18:17:05 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １８ of 22

■ CDMA MODE (1013CH.) Block Edge * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz -14.28 dBm Ref 24 dBm * Att 20 dB * SWT 200 ms 824.000000000 MHz Offset 26.4 dB 20 A 10 1 AV * VIEW 0 LVL -10 1 D1 -13 dBm -20 PRN -30 -40 -50 -60 -70 Center 824 MHz 300 kHz/ Span 3 MHz Date: 14.JUL.2008 16:55:26 ■ CDMA MODE (777CH.) Block Edge * RBW 30 kHz Marker 1 [T1 ] * VBW 30 kHz -13.52 dBm Ref 24 dBm * Att 20 dB * SWT 200 ms 849.000000000 MHz Offset 26.4 dB 20 A 10 1 AV * VIEW 0 LVL -10 1 D1 -13 dBm -20 PRN -30 -40 -50 -60 -70 Start 847.5 MHz 300 kHz/ Stop 850.5 MHz Date: 14.JUL.2008 17:00:14 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page １９ of 22

■ CDMA MODE (1013CH.) Conducted Spurious Emissions * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz -32.02 dBm Ref 24 dBm * Att 20 dB SWT 100 ms 844.800000000 MHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 PRN -30 1 -40 -50 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 14.JUL.2008 17:03:52 * RBW 1 MHz Marker 1 [T1 ] * VBW 1 MHz -36.17 dBm Ref 24 dBm * Att 10 dB SWT 180 ms 1.648000000 GHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 PRN -30 1 -40 -50 -60 -70 Start 1 GHz 900 MHz/ Stop 10 GHz Date: 14.JUL.2008 17:05:03 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ２０ of 22

■ CDMA MODE (384CH.) Conducted Spurious Emissions * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz -39.56 dBm Ref 24 dBm * Att 20 dB SWT 100 ms 817.640000000 MHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 PRN -30 1 -40 -50 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 14.JUL.2008 17:02:30 * RBW 1 MHz Marker 1 [T1 ] * VBW 1 MHz -32.79 dBm Ref 24 dBm * Att 10 dB SWT 180 ms 1.666000000 GHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 PRN -30 1 -40 -50 -60 -70 Start 1 GHz 900 MHz/ Stop 10 GHz Date: 14.JUL.2008 17:05:30 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ２１ of 22

■ CDMA MODE (777CH.) Conducted Spurious Emissions * RBW 100 kHz Marker 1 [T1 ] * VBW 100 kHz -34.82 dBm Ref 24 dBm * Att 20 dB SWT 100 ms 829.280000000 MHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 -30 1 -40 -50 -60 -70 Start 30 MHz 97 MHz/ Stop 1 GHz Date: 14.JUL.2008 17:03:04 * RBW 1 MHz Marker 1 [T1 ] * VBW 1 MHz -35.86 dBm Ref 24 dBm * Att 10 dB SWT 180 ms 1.684000000 GHz Offset 26.4 dB 20 A 10 1 PK VIEW 0 LVL -10 D1 -13 dBm -20 PRN -30 1 -40 -50 -60 -70 Center 5.5 GHz 900 MHz/ Span 9 GHz Date: 14.JUL.2008 17:05:57 FCC Part22 Permissive Change Class II www.hct.co.kr Test Report No. Test Dates: EUT Type: FCC ID: HCT-R08-089 July 14. 2008 Cellular CDMA Wireless Gateway with WLAN PH7MV420A Page ２２ of 22


Document Created: 2008-08-20 16:21:07
Document Modified: 2008-08-20 16:21:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC