Annex A SAR Plots

FCC ID: PH3DJ-NX40T

RF Exposure Info

Download: PDF
FCCID_2653729

Annex A

SAR Plots


                                                                                     Page 1 of 1



                                                               Date/Time: 5/28/2015 11:32:23 AM


450MHz validation 05-28-2015

DUT: Dipole 450 MHz; Type: D450V2; Serial: D450V2 - SN:1090

Communication System: CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.83 mho/m; εr = 46; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (81x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.15 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 36.9 V/m; Power Drift = 0.040 dB
Peak SAR (extrapolated) = 1.65 W/kg
SAR(1 g) = 1.08 mW/g; SAR(10 g) = 0.720 mW/g
Maximum value of SAR (measured) = 1.15 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/29/2015 9:53:27 AM


high ch 511.9MHzbody worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 512 MHz;Duty Cycle: 1:1
Medium parameters used: f = 512 MHz; σ = 1.01 mho/m; εr = 60.3; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.39 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 65.1 V/m; Power Drift = -0.330 dB
Peak SAR (extrapolated) = 6.01 W/kg
SAR(1 g) = 4.17 mW/g; SAR(10 g) = 2.9 mW/g
Maximum value of SAR (measured) = 4.42 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/29/2015 8:12:12 AM


high ch 511.9MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 512 MHz;Duty Cycle: 1:1
Medium parameters used: f = 512 MHz; σ = 0.88 mho/m; εr = 44.4; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.95 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 42.2 V/m; Power Drift = -0.325 dB
Peak SAR (extrapolated) = 2.54 W/kg
SAR(1 g) = 1.84 mW/g; SAR(10 g) = 1.37 mW/g
Maximum value of SAR (measured) = 1.93 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/30/2015 9:57:18 AM


mid ch 496MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 496 MHz;Duty Cycle: 1:1
Medium parameters used: f = 496 MHz; σ = 1 mho/m; εr = 60.5; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 5.58 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 75.6 V/m; Power Drift = -0.401 dB
Peak SAR (extrapolated) = 7.50 W/kg
SAR(1 g) = 5.4 mW/g; SAR(10 g) = 3.91 mW/g
Maximum value of SAR (measured) = 5.70 mW/g




file:///C:/Users/DASY4/Client%20Projects/mid%20ch%20496MHz%20body%20worn-3.htm 6/4/2015


                                                                                     Page 1 of 1



                                                               Date/Time: 5/30/2015 11:24:50 AM

high ch 496MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 496 MHz;Duty Cycle: 1:1
Medium parameters used: f = 496 MHz; σ = 0.86 mho/m; εr = 44.7; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.40 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 56.4 V/m; Power Drift = -0.364 dB
Peak SAR (extrapolated) = 5.61 W/kg
SAR(1 g) = 4.11 mW/g; SAR(10 g) = 3.02 mW/g
Maximum value of SAR (measured) = 4.32 mW/g




file:///C:/Users/DASY4/Client%20Projects/high%20ch%20496MHz%20face%20held-1.htm        6/4/2015


                                                                                     Page 1 of 1



                                                               Date/Time: 5/29/2015 10:47:01 AM


low ch 450.1MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.96 mho/m; εr = 61.5; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 6.48 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 71.3 V/m; Power Drift = 0.183 dB
Peak SAR (extrapolated) = 8.34 W/kg
SAR(1 g) = 5.61 mW/g; SAR(10 g) = 3.95 mW/g
Maximum value of SAR (measured) = 6.24 mW/g


                                                                                     Page 1 of 1



                                                                 Date/Time: 5/28/2015 4:32:01 PM


low ch 450.1MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.83 mho/m; εr = 46; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.79 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 65.9 V/m; Power Drift = -0.658 dB
Peak SAR (extrapolated) = 5.82 W/kg
SAR(1 g) = 4.22 mW/g; SAR(10 g) = 3.12 mW/g
Maximum value of SAR (measured) = 4.51 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/30/2015 9:30:22 AM


mid ch 465MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 465 MHz;Duty Cycle: 1:1
Medium parameters used: f = 465 MHz; σ = 0.98 mho/m; εr = 61.1; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 11.3 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 106.9 V/m; Power Drift = -0.735 dB
Peak SAR (extrapolated) = 13.6 W/kg
SAR(1 g) = 9.85 mW/g; SAR(10 g) = 7.18 mW/g
Maximum value of SAR (measured) = 10.7 mW/g




file:///C:/Users/DASY4/Client%20Projects/mid%20ch%20465MHz%20body%20worn-1.htm 6/4/2015


                                                                                     Page 1 of 1



                                                               Date/Time: 5/30/2015 10:57:52 AM


low ch 465MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 465 MHz;Duty Cycle: 1:1
Medium parameters used: f = 465 MHz; σ = 0.84 mho/m; εr = 45.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 6.80 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 69.3 V/m; Power Drift = -0.362 dB
Peak SAR (extrapolated) = 9.20 W/kg
SAR(1 g) = 6.76 mW/g; SAR(10 g) = 4.95 mW/g
Maximum value of SAR (measured) = 7.32 mW/g




file:///C:/Users/DASY4/Client%20Projects/low%20ch%20465MHz%20face%20held-1.htm         6/4/2015


                                                                                     Page 1 of 1



                                                               Date/Time: 5/29/2015 10:29:56 AM


mid ch 480.1MHzbody worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 480 MHz; σ = 0.99 mho/m; εr = 60.8; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 8.39 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 88.7 V/m; Power Drift = -0.10 dB
Peak SAR (extrapolated) = 8.52 W/kg
SAR(1 g) = 5.26 mW/g; SAR(10 g) = 3.57 mW/g
Maximum value of SAR (measured) = 6.22 mW/g


                                                                                     Page 1 of 1



                                                                 Date/Time: 5/28/2015 3:12:45 PM


mid ch 480.1MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 480 MHz; σ = 0.85 mho/m; εr = 45.2; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 7.45 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 100.6 V/m; Power Drift = -0.67 dB
Peak SAR (extrapolated) = 9.94 W/kg
SAR(1 g) = 7.13 mW/g; SAR(10 g) = 5.26 mW/g
Maximum value of SAR (measured) = 7.71 mW/g


                                                                                     Page 1 of 1



                                                               Date/Time: 5/28/2015 11:32:23 AM


450MHz validation 05-28-2015

DUT: Dipole 450 MHz; Type: D450V2; Serial: D450V2 - SN:1090

Communication System: CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.83 mho/m; εr = 46; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (81x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.15 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 36.9 V/m; Power Drift = 0.040 dB
Peak SAR (extrapolated) = 1.65 W/kg
SAR(1 g) = 1.08 mW/g; SAR(10 g) = 0.720 mW/g
Maximum value of SAR (measured) = 1.15 mW/g


                                            SAR(x,y,z,f0)
                                   SAR; Z Scan:Value Along Z, X=0, Y=0

       0.65

       0.60

       0.55

       0.50

       0.45

       0.40
mW/g




       0.35

       0.30

       0.25

       0.20

       0.15

       0.10

       0.05

       0.00
              0.00   0.01   0.02     0.03    0.04   0.05    0.06    0.07   0.08   0.09   0.10
                                                     m


                                                                                     Page 1 of 1



                                                                 Date/Time: 5/28/2015 4:32:01 PM


low ch 450.1MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.83 mho/m; εr = 46; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.79 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 65.9 V/m; Power Drift = -0.658 dB
Peak SAR (extrapolated) = 5.82 W/kg
SAR(1 g) = 4.22 mW/g; SAR(10 g) = 3.12 mW/g
Maximum value of SAR (measured) = 4.51 mW/g


                                                                                     Page 1 of 1



                                                               Date/Time: 5/30/2015 10:57:52 AM


low ch 465MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 465 MHz;Duty Cycle: 1:1
Medium parameters used: f = 465 MHz; σ = 0.84 mho/m; εr = 45.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 6.80 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 69.3 V/m; Power Drift = -0.362 dB
Peak SAR (extrapolated) = 9.20 W/kg
SAR(1 g) = 6.76 mW/g; SAR(10 g) = 4.95 mW/g
Maximum value of SAR (measured) = 7.32 mW/g




file:///C:/Users/DASY4/Client%20Projects/low%20ch%20465MHz%20face%20held-1.htm         6/4/2015


                                                                                     Page 1 of 1



                                                                 Date/Time: 5/28/2015 3:12:45 PM


mid ch 480.1MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 480 MHz; σ = 0.85 mho/m; εr = 45.2; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 7.45 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 100.6 V/m; Power Drift = -0.67 dB
Peak SAR (extrapolated) = 9.94 W/kg
SAR(1 g) = 7.13 mW/g; SAR(10 g) = 5.26 mW/g
Maximum value of SAR (measured) = 7.71 mW/g


                                      SAR(x,y,z,f0)
                              SAR; Z Scan:Value Along Z, X=0, Y=0


       1.4


       1.2


       1.0
mW/g




       0.8


       0.6


       0.4


       0.2


       0.0
             -0.00   0.01   0.02    0.03      0.04      0.05        0.06   0.07   0.08
                                               m


                                                                                     Page 1 of 1



                                                               Date/Time: 5/30/2015 11:24:50 AM

high ch 496MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 496 MHz;Duty Cycle: 1:1
Medium parameters used: f = 496 MHz; σ = 0.86 mho/m; εr = 44.7; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.40 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 56.4 V/m; Power Drift = -0.364 dB
Peak SAR (extrapolated) = 5.61 W/kg
SAR(1 g) = 4.11 mW/g; SAR(10 g) = 3.02 mW/g
Maximum value of SAR (measured) = 4.32 mW/g




file:///C:/Users/DASY4/Client%20Projects/high%20ch%20496MHz%20face%20held-1.htm        6/4/2015


                                                                                    Page 1 of 1



                                                                Date/Time: 5/29/2015 8:12:12 AM


high ch 511.9MHz face held

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 512 MHz;Duty Cycle: 1:1
Medium parameters used: f = 512 MHz; σ = 0.88 mho/m; εr = 44.4; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(7.18, 7.18, 7.18); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 1.95 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 42.2 V/m; Power Drift = -0.325 dB
Peak SAR (extrapolated) = 2.54 W/kg
SAR(1 g) = 1.84 mW/g; SAR(10 g) = 1.37 mW/g
Maximum value of SAR (measured) = 1.93 mW/g


                                                                                     Page 1 of 1



                                                               Date/Time: 5/29/2015 10:47:01 AM


low ch 450.1MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 450 MHz;Duty Cycle: 1:1
Medium parameters used: f = 450 MHz; σ = 0.96 mho/m; εr = 61.5; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 6.48 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 71.3 V/m; Power Drift = 0.183 dB
Peak SAR (extrapolated) = 8.34 W/kg
SAR(1 g) = 5.61 mW/g; SAR(10 g) = 3.95 mW/g
Maximum value of SAR (measured) = 6.24 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/30/2015 9:30:22 AM


mid ch 465MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 465 MHz;Duty Cycle: 1:1
Medium parameters used: f = 465 MHz; σ = 0.98 mho/m; εr = 61.1; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 11.3 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 106.9 V/m; Power Drift = -0.735 dB
Peak SAR (extrapolated) = 13.6 W/kg
SAR(1 g) = 9.85 mW/g; SAR(10 g) = 7.18 mW/g
Maximum value of SAR (measured) = 10.7 mW/g




file:///C:/Users/DASY4/Client%20Projects/mid%20ch%20465MHz%20body%20worn-1.htm 6/4/2015


                                 Interpolated SAR(x,y,z,f0)
                                 SAR; Z Scan:Value Along Z, X=0, Y=0
       12

       11

       10

       9

       8

       7
mW/g




       6

       5

       4

       3

       2

       1

       0
            0.00   0.01   0.02       0.03      0.04     0.05      0.06   0.07   0.08
                                                  m


                                                                                     Page 1 of 1



                                                               Date/Time: 5/29/2015 10:29:56 AM


mid ch 480.1MHzbody worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 480 MHz;Duty Cycle: 1:1
Medium parameters used: f = 480 MHz; σ = 0.99 mho/m; εr = 60.8; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 8.39 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 88.7 V/m; Power Drift = -0.10 dB
Peak SAR (extrapolated) = 8.52 W/kg
SAR(1 g) = 5.26 mW/g; SAR(10 g) = 3.57 mW/g
Maximum value of SAR (measured) = 6.22 mW/g


                                                                                    Page 1 of 1



                                                                Date/Time: 5/30/2015 9:57:18 AM


mid ch 496MHz body worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 496 MHz;Duty Cycle: 1:1
Medium parameters used: f = 496 MHz; σ = 1 mho/m; εr = 60.5; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 5.58 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 75.6 V/m; Power Drift = -0.401 dB
Peak SAR (extrapolated) = 7.50 W/kg
SAR(1 g) = 5.4 mW/g; SAR(10 g) = 3.91 mW/g
Maximum value of SAR (measured) = 5.70 mW/g




file:///C:/Users/DASY4/Client%20Projects/mid%20ch%20496MHz%20body%20worn-3.htm 6/4/2015


                                                                                    Page 1 of 1



                                                                Date/Time: 5/29/2015 9:53:27 AM


high ch 511.9MHzbody worn

DUT: Allinco; Type: PTT; Serial: T000403

Communication System: Alinco CW; Frequency: 512 MHz;Duty Cycle: 1:1
Medium parameters used: f = 512 MHz; σ = 1.01 mho/m; εr = 60.3; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY4 (High Precision Assessment)

DASY4 Configuration:

   z   Probe: ES3DV3 - SN3035; ConvF(6.76, 6.76, 6.76); Calibrated: 5/18/2015
   z   Sensor-Surface: 4mm (Mechanical Surface Detection)
   z   Electronics: DAE4 Sn602; Calibrated: 5/22/2015
   z   Phantom: ELI v6.0; Type: QDOVA003AA;
   z   Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145


Area Scan (61x161x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (interpolated) = 4.39 mW/g

Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 65.1 V/m; Power Drift = -0.330 dB
Peak SAR (extrapolated) = 6.01 W/kg
SAR(1 g) = 4.17 mW/g; SAR(10 g) = 2.9 mW/g
Maximum value of SAR (measured) = 4.42 mW/g


                                            SAR(x,y,z,f0)
                                   SAR; Z Scan:Value Along Z, X=0, Y=0

       0.65

       0.60

       0.55

       0.50

       0.45

       0.40
mW/g




       0.35

       0.30

       0.25

       0.20

       0.15

       0.10

       0.05

       0.00
              0.00   0.01   0.02     0.03    0.04   0.05    0.06    0.07   0.08   0.09   0.10
                                                     m


                                 Interpolated SAR(x,y,z,f0)
                                 SAR; Z Scan:Value Along Z, X=0, Y=0
       12

       11

       10

       9

       8

       7
mW/g




       6

       5

       4

       3

       2

       1

       0
            0.00   0.01   0.02       0.03      0.04     0.05      0.06   0.07   0.08
                                                  m


                                 SAR(x,y,z,f0)
                         SAR; Z Scan:Value Along Z, X=0, Y=0



       7


       6


       5
mW/g




       4


       3


       2


       1


       0
           0.01   0.02    0.03      0.04       0.05     0.06   0.07   0.08
                                           m


                                      SAR(x,y,z,f0)
                              SAR; Z Scan:Value Along Z, X=0, Y=0


       1.4


       1.2


       1.0
mW/g




       0.8


       0.6


       0.4


       0.2


       0.0
             -0.00   0.01   0.02    0.03      0.04      0.05        0.06   0.07   0.08
                                               m



Document Created: 2015-06-16 08:34:34
Document Modified: 2015-06-16 08:34:34

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC