modular approval attestation

FCC ID: PD9LEN3945ABG

Attestation Statements

Download: PDF
FCCID_627827

sE a Intel Corporation I a 2111 NE 25" Avenue Hillsboro, OR 97124 TRANSMITTER MODULAR APPROVAL ATTESTATION January 24, 2006 Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application Modular Approval Certification for FCC ID: PD9LEN3945ABG Gentlemen: The following attestation addresses the eight requirements to support modular approval as required by the FCC Public Notice DAOO—1407 "Part 15 Unlicensed Modular Transmitter Approval" 1) The modular transmitter has its own RF shielding and does not rely upon the shielding provided by the device into which it is installed in order to comply with Part 15 limits. 2) The modular transmitter has buffered modulation/data inputs. All inputs to the modules are buffered through the radio circuitry. 3) The modular transmitter hasits own power supply regulation. 4) The modular transmitter has an antenna that complies with section 15.203 and 15.204(c) of the FCC rules. It has a UFL type of connector at the transmitter end and is soldered to the antenna (depending on OEM configuration). Also the antenna will be internal in the OEM host equipment and inaccessible to the user. 5) The modular transmitter wastested outside of a host desktop computer using a PCI extender card. The PCI extender card allows the transmitter to be placed outside of thechassis of the host desktop computer. 6) The modular transmitter will be labeled with its own FCC ID. Also, the OEM host computer manufacturer will be informed to display a label referring to the enclosed module. The exterior label will readas follows: "Contains Transmitter Module FCC ID" or "Contains TXFCCID". 7) The modular transmitter is manufactured so that the user cannotinfluence the operation of the transmitter that will operate outside ofthescope of the regulations. 8) The modular transmitter meets the MPE calculationsof 47 CFR 1.1307(b)(1). Also, SAR data is available if necessary. If there are any additional questions or if further information is needed, please contact us at your earliest convenience at (503) 712—8076. Sincerely, & Marissa Fausti Compliance Engineer Intel Corporation


Document Created: 2006-02-07 09:32:07
Document Modified: 2006-02-07 09:32:07
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC