Test Report DTS BLE

FCC ID: PD98260NG

Test Report

Download: PDF
FCCID_3248438

Report No.: 1560147R-RFUSP01V00-B FCC Test Report (Class II Permissive Change) Product Name Intel® Dual Band Wireless-AC 8260 Model No. 8260NGW FCC ID. PD98260NG, PD98260NGU *FCC ID: PD98260NG (for OEM factory install) *FCC ID: PD98260NGU (for User Installation w/bios lock feature.) Applicant Intel Mobile Communications Address 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA Date of Receipt June 03, 2015 Issued Date Oct. 20, 2016 Report No. 1560147R-RFUSP01V00-B Report Version V2.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Page: 1 of 26

Report No.: 1560147R-RFUSP01V00-B Tes t R e p o r t Issued Date: Oct. 20, 2016 Report No.: 1560147R-RFUSP01V00-B Product Name Intel® Dual Band Wireless-AC 8260 Applicant Intel Mobile Communications Address 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA Manufacturer Intel Mobile Communications Model No. 8260NGW FCC ID. PD98260NG, PD98260NGU EUT Rated Voltage DC 3.3V (via Mini-PCI Express slot) EUT Test Voltage AC 120V/60Hz Trade Name Intel Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2015 ANSI C63.4: 2014, ANSI C63.10: 2013 KDB 558074 D01 DTS Meas Guidance v03r05 Test Result Complied Documented By : ( Senior Adm. Specialist / Jinn Chen ) Tested By : ( Engineer / Nick Chen ) Approved By : ( Director / Vincent Lin ) Page: 2 of 26

Report No.: 1560147R-RFUSP01V00-B TA B L E O F C O N T E N T S Description Page 1. GENERAL INFORMATION ...............................................................................................................4 1.1. EUT Description ......................................................................................................................................4 1.2. Operational Description ...........................................................................................................................6 1.3. Tested System Details ..............................................................................................................................7 1.4. Configuration of Tested System ..............................................................................................................7 1.5. EUT Exercise Software ...........................................................................................................................7 1.6. Test Facility .............................................................................................................................................8 1.7. List of Test Item and Equipment .............................................................................................................9 2. PEAK POWER OUTPUT ..................................................................................................................10 2.1. Test Setup ..............................................................................................................................................10 2.2. Limit ......................................................................................................................................................10 2.3. Test Procedure .......................................................................................................................................10 2.4. Uncertainty ............................................................................................................................................10 2.5. Test Result of Peak Power Output ......................................................................................................... 11 3. RADIATED EMISSION .....................................................................................................................12 3.1. Test Setup ..............................................................................................................................................12 3.2. Limits.....................................................................................................................................................13 3.3. Test Procedure .......................................................................................................................................14 3.4. Uncertainty ............................................................................................................................................14 3.5. Test Result of Radiated Emission ..........................................................................................................15 4. BAND EDGE .......................................................................................................................................19 4.1. Test Setup ..............................................................................................................................................19 4.2. Limit ......................................................................................................................................................19 4.3. Test Procedure .......................................................................................................................................19 4.4. Uncertainty ............................................................................................................................................19 4.5. Test Result of Band Edge ......................................................................................................................20 5. EMI REDUCTION METHOD DURING COMPLIANCE TESTING ..........................................24 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Page: 3 of 26

Report No.: 1560147R-RFUSP01V00-B 1. GENERAL INFORMATION 1.1. EUT Description Product Name Intel® Dual Band Wireless-AC 8260 Trade Name Intel Model No. 8260NGW FCC ID. PD98260NG, PD98260NGU Frequency Range 2402 – 2480MHz Channel Number V4.0: 40CH Type of Modulation V4.0: GFSK(1Mbps) Antenna Type Dipole Antenna Channel Control Auto Antenna Gain Refer to the table “Antenna List” Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 WIESON GY121HT0321-003-H (External) Dipole 2.89 dBi for 2.4GHz Note: The antenna of EUT is conforming to FCC 15.203. Page: 4 of 26

Report No.: 1560147R-RFUSP01V00-B Center Frequency of Each Channel: (For V4.0) Channel Frequency Channel Frequency Channel Frequency Channel Frequency Channel 00: 2402 MHz Channel 01: 2404 MHz Channel 02: 2406 MHz Channel 03: 2408 MHz Channel 04: 2410 MHz Channel 05: 2412 MHz Channel 06: 2414 MHz Channel 07: 2416 MHz Channel 08: 2418 MHz Channel 09: 2420 MHz Channel 10: 2422 MHz Channel 11: 2424 MHz Channel 12: 2426 MHz Channel 13: 2428 MHz Channel 14: 2430 MHz Channel 15: 2432 MHz Channel 16: 2434 MHz Channel 17: 2436 MHz Channel 18: 2438 MHz Channel 19: 2440 MHz Channel 20: 2442 MHz Channel 21: 2444 MHz Channel 22: 2446 MHz Channel 23: 2448 MHz Channel 24: 2450 MHz Channel 25: 2452 MHz Channel 26: 2454 MHz Channel 27: 2456 MHz Channel 28: 2458 MHz Channel 29: 2460 MHz Channel 30: 2462 MHz Channel 31: 2464 MHz Channel 32: 2466 MHz Channel 33: 2468 MHz Channel 34: 2470 MHz Channel 35: 2472 MHz Channel 36: 2474 MHz Channel 37: 2476 MHz Channel 38: 2478 MHz Channel 39: 2480 MHz Note: 1. The EUT is an Intel® Dual Band Wireless-AC 8260 with a built-in WLAN、Bluetooth transceiver, this report for Bluetooth 4.0. 2. These tests were conducted on a sample for the purpose of demonstrating compliance of Bluetooth transmitter with Part 15 Subpart C Paragraph 15.247 for spread spectrum devices. 3. Regarding to the operation frequency, the lowest, middle and highest frequency are selected to perform the test. 4. This is to request a Class II permissive change for FCC ID: PD98260NG (originally granted on 05/27/2015) and PD98260NGU (originally granted on 05/27/2015). The major change filed under this application is: Change #1: Addition of new dipole type antenna, WIESON, part no. GY121HT0321-003-H (External). This antenna will be restricted to mobile category computers and stationary desktop computers. Test Mode Mode 1: Transmit - BLE (GFSK) Page: 5 of 26

Report No.: 1560147R-RFUSP01V00-B 1.3. Tested System Details The types for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 Notebook PC DELL N/A N/A Non-Shielded, 1.8m 2 Test Fixture Intel N/A N/A N/A Signal Cable Type Signal cable Description A Test Fixture Cable Non-Shielded, 1.0m 1.4. Configuration of Tested System 1.5. EUT Exercise Software (1) Setup the EUT and Peripherals as shown on 1.4 (2) Execute software “DRTU (Ver 1.8.1-01253)” on the Notebook PC. (3) Configure the test mode, the test channel, and the data rate. (4) Press “OK” to start the continuous Transmit. (5) Verify that the EUT works properly. Page: 7 of 26

Report No.: 1560147R-RFUSP01V00-B 1.6. Test Facility Ambient conditions in the laboratory: Items Required (IEC 68-1) Actual Temperature (C) 15-35 20-35 Humidity (%RH) 25-75 30-65 Barometric pressure (mbar) 860-1060 950-1000 The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site: http://www.quietek.com/chinese/about/certificates.aspx?bval=5 The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site: http://www.quietek.com/ Site Description: File on Federal Communications Commission FCC Engineering Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Registration Number: 92195 Site Name: Quietek Corporation Site Address: No.5-22, Ruishukeng, Linkou Dist. New Taipei City 24451, Taiwan, R.O.C. TEL: 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com FCC Accreditation Number: TW1014 Page: 8 of 26

Report No.: 1560147R-RFUSP01V00-B 1.7. List of Test Item and Equipment For Conducted measurements /CB3 Equipment Manufacturer Model No. Serial No. Cali. Data Due. Data X Spectrum Analyzer Agilent N9010A MY48030495 2016/7/22 2017/7/21 X Power Meter Anritsu ML2495A 6K00003357 2016/6/23 2017/6/22 X Power Sensor Agilent U2021XA MY53400007 2015/11/26 2016/11/24 X Power Sensor Agilent U2021XA MY53400006 2015/11/26 2016/11/24 X Power Sensor Agilent U2021XA MY53360005 2015/11/26 2016/11/24 X Power Sensor Agilent U2021XA MY53400008 2015/11/26 2016/11/24 Signal Generator Agilent N5182B MY53050685 2016/5/31 2017/5/30 Analog Signal Geator Agilent E8257DK/E825 MY44320633 2016/9/13 2017/9/12 For Radiated measurements /Site3/CB10/CB8 Equipment Manufacturer Model No. Serial No. Cali. Data Due. Data X Spectrum Analyzer R&S FSP40 100170 2016/1/5 2017/1/3 Loop Antenna TESEQ HLA6121 37133 2016/3/18 2017/3/17 X Bi-Log Antenna Schaffner Chase CBL6112B 2707 2016/6/11 2017/6/10 X Horn Antenna ETS-Lindgren 3117 00203761 2015/10/15 2016/10/13 Horn Antenna Schwarzbeck BBHA9170 209 2016/4/14 2017/4/13 X Pre-Amplifier QuieTek QTK-LK-E-I-A N/A 2016/6/16 2017/6/15 X Pre-Amplifier EMCI EMC012630SE 980210 2016/1/26 2017/1/24 Pre-Amplifier NARDA WE DBL-1840N506 013 2016/8/6 2017/8/4 X Filter MicroTRON BRM50701 019 2015/10/20 2016/10/18 Filter Microwave Circuits N0257881 36681 2015/12/7 2016/12/5 X EMI Test Receiver R&S ESCS 30 838251/001 2016/7/21 2017/7/20 X Coaxial Cable QTK(Arnist) RG 214 LC003-RG 2016/6/16 2017/6/15 X Coaxial signal switch Anritsu MP59B 6201415889 2016/6/16 2017/6/15 Note: 1. All equipments are calibrated every one year. 2. The test instruments marked with “X” are used to measure the final test results. 3. Test Software version : Keysight EN300328&EN301893 Test System V2.151229. Page: 9 of 26

Report No.: 1560147R-RFUSP01V00-B 2. Peak Power Output 2.1. Test Setup EUT RF Cable Power Meter SMA Connecter 2.2. Limit The maximum peak power shall be less 1Watt. 2.3. Test Procedure Tested according to DTS test procedure of KDB 558074 for compliance to FCC 47CFR 15.247 requirements. The maximum peak conducted output power using KDB 558074 section 9.1.2 PKPM1 Peak power meter method. 2.4. Uncertainty ± 1.27 dB Page: 10 of 26

Report No.: 1560147R-RFUSP01V00-B 2.5. Test Result of Peak Power Output Product : Intel® Dual Band Wireless-AC 8260 Test Item : Peak Power Output Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) Test Date : 2016/09/22 Channel No. Frequency Measurement Required Limit Result (MHz) (dBm) Channel 00 2402.00 9.84 1 Watt= 30 dBm Pass Channel 19 2440.00 9.96 1 Watt= 30 dBm Pass Channel 39 2480.00 9.89 1 Watt= 30 dBm Pass Page: 11 of 26

Report No.: 1560147R-RFUSP01V00-B 3. Radiated Emission 3.1. Test Setup Below 1GHz 3m FRP Dome 1m to 4m The height of board band or Dipole Antenna was scanned from 1M to 4M. The distance between EUT antenna and turn table Non-Conducted Table was 3M regards to the standard adopted. 80cm Fully soldered Metal Ground To Controller Test To Receiver Receiver Above 1GHz 3m The height of board band or Dipole Antenna was scanned from 1M to 4M. The distance between antenna and turn table was 3M regards to the standard adopted. EUT RF absorber material on the ground plane. 150cm To Receiver Pre- Amplifier Page: 12 of 26

Report No.: 1560147R-RFUSP01V00-B 3.2. Limits  General Radiated Emission Limits Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 20dB below the level of the fundamental or to the general radiated emission limits in paragraph 15.209, whichever is the lesser attenuation. FCC Part 15 Subpart C Paragraph 15.209 Limits Frequency Field strength Measurement distance MHz (meter) (microvolts/meter) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Remarks: 1. RF Voltage (dBμV) = 20 log RF Voltage (uV) 2. In the Above Table, the tighter limit applies at the band edges. 3. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Page: 13 of 26

Report No.: 1560147R-RFUSP01V00-B 3.3. Test Procedure The EUT was setup according to ANSI C63.10: 2013 and tested according to DTS test procedure of KDB558074 for compliance to FCC 47CFR 15.247 requirements. Measuring the frequency range below 1GHz, the EUT is placed on a turn table which is 0.8 meter above ground,when measuring the frequency range above 1GHz, the EUT is placed on a turn table which is 1.5 meter above ground. The turn table is rotated 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3 meters. The antenna is scanned between 1 meter and 4 meters to find out the maximum emission level. This is repeated for both horizontal and vertical polarization of the antenna. In order to find the maximum emission, all of the interface cables were manipulated according to ANSI C63.10: 2013 on radiated measurement. The resolution bandwidth below 30MHz setting on the field strength meter is 9kHz and 30MHz~1GHz is 120kHz and above 1GHz is 1MHz. Radiated emission measurements below 30MHz are made using Loop Antenna and 30MHz~1GHz are made using broadband Bilog antenna and above 1GHz are made using Horn Antennas. The measurement is divided into the Preliminary Measurement and the Final Measurement. The suspected frequencies are searched for in Preliminary Measurement with the measurement antenna kept pointed at the source of the emission both in azimuth and elevation, with the polarization of the antenna oriented for maximum response. The antenna is pointed at an angle towards the source of the emission, and the EUT is rotated in both height and polarization to maximize the measured emission. The emission is kept within the illumination area of the 3 dB bandwidth of the antenna. The worst radiated emission is measured in the Open Area Test Site on the Final Measurement. The measurement frequency range form 9kHz - 10th Harmonic of fundamental was investigated. 3.4. Uncertainty ± 3.9 dB above 1GHz ± 3.8 dB below 1GHz Page: 14 of 26

Report No.: 1560147R-RFUSP01V00-B 3.5. Test Result of Radiated Emission Product : Intel® Dual Band Wireless-AC 8260 Test Item : Harmonic Radiated Emission Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK)(2402MHz) Test Date : 2016/09/26 Frequency Correct Reading Measurement Margin Limit Factor Level Level MHz dB dBμV dBμV/m dB dBμV/m Horizontal Peak Detector: 4804.000 2.511 39.431 41.941 -32.059 74.000 7206.000 9.511 42.572 52.083 -21.917 74.000 9608.000 10.394 41.029 51.423 -22.577 74.000 Average Detector: -- -- -- -- -- 54.000 Vertical Peak Detector: 4804.000 2.923 46.427 49.349 -24.651 74.000 7206.000 9.988 42.128 52.117 -21.883 74.000 9608.000 10.847 40.727 51.574 -22.426 74.000 Average Detector: -- -- -- -- -- 54.000 Note: 1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. Measurement Level = Reading Level + Correct Factor. 5. Correct Factor = Antenna factor + Cable loss –Amplifier gain. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The emission levels of other frequencies are very lower than the limit and not show in test report. Page: 15 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : Harmonic Radiated Emission Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2440MHz) Test Date : 2016/09/26 Frequency Correct Reading Measurement Margin Limit Factor Level Level MHz dB dBμV dBμV/m dB dBμV/m Horizontal Peak Detector: 4880.000 2.038 40.756 42.794 -31.206 74.000 7320.000 9.699 43.799 53.498 -20.502 74.000 9760.000 9.665 40.532 50.197 -23.803 74.000 Average Detector: -- -- -- -- -- 54.000 Vertical Peak Detector: 4880.000 2.499 45.882 48.381 -25.619 74.000 7320.000 10.303 43.183 53.486 -20.514 74.000 9760.000 10.299 40.514 50.814 -23.186 74.000 Average Detector: -- -- -- -- -- 54.000 Note: 1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. Measurement Level = Reading Level + Correct Factor. 5. Correct Factor = Antenna factor + Cable loss –Amplifier gain. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The emission levels of other frequencies are very lower than the limit and not show in test report. Page: 16 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : Harmonic Radiated Emission Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2480MHz) Test Date : 2016/09/26 Frequency Correct Reading Measurement Margin Limit Factor Level Level MHz dB dBμV dBμV/m dB dBμV/m Horizontal Peak Detector: 4960.000 2.582 38.505 41.087 -32.913 74.000 7440.000 10.555 43.062 53.617 -20.383 74.000 9920.000 10.206 40.643 50.849 -23.151 74.000 Average Detector: -- -- -- -- -- 54.000 Vertical Peak Detector: 4960.000 3.398 44.879 48.278 -25.722 74.000 7440.000 11.214 42.260 53.474 -20.526 74.000 9920.000 11.245 40.489 51.734 -22.266 74.000 Average Detector: -- -- -- -- -- 54.000 Note: 1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. Measurement Level = Reading Level + Correct Factor. 5. Correct Factor = Antenna factor + Cable loss –Amplifier gain. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The emission levels of other frequencies are very lower than the limit and not show in test report. Page: 17 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : General Radiated Emission Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2440MHz) Test Date : 2016/09/26 Frequency Correct Reading Measurement Margin Limit Factor Level Level MHz dB dBμV dBμV/m dB dBμV/m Horizontal 131.480 -7.418 40.702 33.284 -10.216 43.500 259.370 -5.447 35.565 30.118 -15.882 46.000 409.940 -0.069 36.159 36.089 -9.911 46.000 607.610 3.999 31.592 35.591 -10.409 46.000 764.830 5.093 25.379 30.473 -15.527 46.000 925.170 6.654 25.894 32.548 -13.452 46.000 Vertical 147.150 -5.438 38.308 32.871 -10.629 43.500 258.060 -4.946 37.672 32.726 -13.274 46.000 386.200 -0.693 37.922 37.228 -8.772 46.000 504.170 -0.060 37.975 37.915 -8.085 46.000 626.740 -0.038 38.531 38.493 -7.507 46.000 784.590 2.737 33.975 36.711 -9.289 46.000 Note: 1. All Readings below 1GHz are Quasi-Peak, above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. Measurement Level = Reading Level + Correct Factor. 5. Correct Factor = Antenna factor + Cable loss –Amplifier gain. 6. The average measurement was not performed when the peak measured data under the limit of average detection. 7. The emission levels of other frequencies are very lower than the limit and not show in test report. 8. No emission found between lowest internal used/generated frequency to 30MHz. Page: 18 of 26

Report No.: 1560147R-RFUSP01V00-B 4. Band Edge 4.1. Test Setup 3m The height of board band or Dipole Antenna was scanned from 1M to 4M. The distance between antenna and turn table was 3M regards to the standard adopted. EUT RF absorber material on the ground plane. 150cm To Receiver Pre- Amplifier 4.2. Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement. Attenuation below the general limits specified in Section 15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in Section 15.205(a), must also comply with the radiated emission limits specified in Section 15.209(a) (see Section 15.205(c)). 4.3. Test Procedure The EUT was setup according to ANSI C63.10, 2013 and tested according to DTS test procedure of KDB558074 for compliance to FCC 47CFR 15.247 requirements. The EUT is placed on a turn table which is 1.5 meter above ground. The turn table is rotated 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 3 meters. The antenna is scanned from 1 meter to 4 meters to find out the maximum emission level. This is repeated for both horizontal and vertical polarization of the antenna. In order to find the maximum emission, all of the interface cables were manipulated according to ANSI C63.10:2013 on radiated measurement. 4.4. Uncertainty ± 3.9 dB above 1GHz ± 3.8 dB below 1GHz Page: 19 of 26

Report No.: 1560147R-RFUSP01V00-B 4.5. Test Result of Band Edge Product : Intel® Dual Band Wireless-AC 8260 Test Item : Band Edge Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2402MHz) Test Date : 2016/09/26 RF Radiated Measurement (Horizontal): Frequency Correct Factor Reading Level Emission Level Peak Limit Arerage Limit Channel No. Result (MHz) (dB) (dBμV) (dBμV/m) (dBμV/m) (dBμV/m) 00 (Peak) 2390.000 -1.131 47.719 46.588 74.00 54.00 Pass 00 (Peak) 2400.000 -1.084 64.107 63.024 74.00 54.00 Pass 00 (Peak) 2402.174 -1.072 94.430 93.358 -- -- -- 00 (Average) 2390.000 -1.131 33.951 32.820 74.00 54.00 Pass 00 (Average) 2400.000 -1.084 42.391 41.308 74.00 54.00 Pass 00 (Average) 2402.029 -1.073 73.750 72.678 -- -- -- Figure Channel 00: Horizontal (Peak) Figure Channel 00: Horizontal (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. Page: 20 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : Band Edge Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2402MHz) Test Date : 2016/09/26 RF Radiated Measurement (Vertical): Frequency Correct Factor Reading Level Emission Level Peak Limit Arerage Limit Channel No. Result (MHz) (dB) (dBμV) (dBμV/m) (dBμV/m) (dBμV/m) 00 (Peak) 2390.000 -1.725 50.444 48.719 74.00 54.00 Pass 00 (Peak) 2400.000 -1.733 74.916 73.184 74.00 54.00 Pass 00 (Peak) 2401.884 -1.729 104.620 102.891 -- -- -- 00 (Average) 2390.000 -1.725 34.511 32.786 74.00 54.00 Pass 00 (Average) 2400.000 -1.733 48.894 47.162 74.00 54.00 Pass 00 (Average) 2402.029 -1.729 81.267 79.538 -- -- -- Figure Channel 00: Vertical (Peak) Figure Channel 00: Vertical (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. Page: 21 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : Band Edge Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2480MHz) Test Date : 2016/09/26 RF Radiated Measurement (Horizontal): Frequency Correct Factor Reading Level Emission Level Peak Limit Arerage Limit Channel No. Result (MHz) (dB) (dBμV) (dBμV/m) (dBμV/m) (dBμV/m) 39 (Peak) 2480.167 -0.579 99.237 98.658 -- -- -- 39 (Peak) 2483.500 -0.558 52.597 52.039 74.00 54.00 Pass 39 (Peak) 2489.587 -0.518 55.852 55.333 74.00 54.00 Pass 39 (Average) 2480.022 -0.580 77.472 76.892 -- -- -- 39 (Average) 2483.500 -0.558 39.162 38.604 74.00 54.00 Pass Figure Channel 39: Horizontal (Peak) Figure Channel 39: Horizontal (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. Page: 22 of 26

Report No.: 1560147R-RFUSP01V00-B Product : Intel® Dual Band Wireless-AC 8260 Test Item : Band Edge Test Site : No.3 OATS Test Mode : Mode 1: Transmit - BLE (GFSK) (2480MHz) Test Date : 2016/09/26 RF Radiated Measurement (Vertical): Frequency Correct Factor Reading Level Emission Level Peak Limit Arerage Limit Channel No. Result (MHz) (dB) (dBμV) (dBμV/m) (dBμV/m) (dBμV/m) 39 (Peak) 2480.312 -1.323 108.582 107.259 -- -- -- 39 (Peak) 2483.500 -1.305 65.198 63.893 74.00 54.00 Pass 39 (Average) 2480.022 -1.324 84.330 83.006 -- -- -- 39 (Average) 2483.500 -1.305 43.894 42.589 74.00 54.00 Pass Figure Channel 39: Vertical (Peak) Figure Channel 39: Vertical (Average) Note: 1. All readings above 1GHz are performed with peak and/or average measurements as necessary. 2. Peak measurements: RBW = 1MHz, VBW = 3 MHz, Sweep: Auto. 3. Average measurements: RBW = 1MHz, VBW = 10 Hz, Sweep: Auto. 4. “ * ”, means this data is the worst emission level. 5. Measurement Level = Reading Level + Correct Factor. 6. The average measurement was not performed when the peak measured data under the limit of average detection. Page: 23 of 26

Report No.: 1560147R-RFUSP01V00-B 5. EMI Reduction Method During Compliance Testing No modification was made during testing. Page: 24 of 26

Report No.: 1560147R-RFUSP01V00-B Attachment 1: EUT Test Photographs Page: 25 of 26

Report No.: 1560147R-RFUSP01V00-B Attachment 2: EUT Detailed Photographs Page: 26 of 26


Document Created: 2016-12-01 09:33:40
Document Modified: 2016-12-01 09:33:40
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC