RF Exposure SAR Report 2

FCC ID: PD98260NG

RF Exposure Info

Download: PDF
FCCID_2962782

Appendix E. Dipole Calibration Validation Dipole 2450 MHz M/N: D2450V2 S/N: 930 Validation Dipole 5 GHz M/N: D5GHzV2 S/N: 1041

“«Hg af _it ltp Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client Quietek—TW (Auden) Certificate No: D2450V2—930_Nov14 |CALIBRATION CERTIFICATE Object D2450V2 — SN: 930 Calibration procedure(s} QA CAL—05.v9 Calibration procedure for dipole validation kits above 700 MHz Calibration date: November 19, 2014 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37292783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) 03—Apr—14 (No. 217—01918) Apr—15 Type—N mismatch combination SN: 5047.2 / 06327 03—Apr—14 (No. 217—01921) Apr—15 Reference Probe ESSDV3 SN: 8205 30—Dec—13 (No. ES3—3205_Dec13) Dec—14 DAE4 SN: 601 18—Aug—14 (No. DAE4—601_Aug14) Aug—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—14) In house check: Oct—15 Name Function Signature Calibrated by: Michael Weber Laboratory Technician MWleLey_ Approved by: KatJa Pokovic Technical Manager esz Issued: November20, 2014 This calibration certificate shall not be reproduced exceptin full without written approvalof the laboratory. Certificate No: D2450V2—930_Nov14 Page 1 of 8

. . 891991 Calibration Laboratory of wls Schweizerischer Kalibrierdienst 8 + : v z Schmid & Partner ;ia\gn—%fi Service suisse d‘étalonnage Engineering AG pe Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 4’I//\\\\‘\\\\ Swiss Calibration Service alitubs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,2z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle!l to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D2450V2—930_Novi4 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not iven on page 1. DASY Version DASYS5 V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz * 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 39.0 £ 6 % 1.86 mho/m + 6 % Head TSL temperature change during test <0.5 °C ——— ——— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 13.2 Wi/kg SAR for nominal Head TSL parameters normalized to 1W 51.9 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.09 W/kg SAR for nominal Head TSL parameters normalized to 1W 24.1 Wikg x 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 50.9 16 % 2.03 mho/m :# 6 % Body TSL temperature change during test <0.5 °C ~—~ ~—— SAR result with Body TSL SAR averaged over 1 cm‘* (1 g) of Body TSL Condition SAR measured 250 mW input power 13.3 Wikg SAR for nominal Body TSL parameters normalized to 1W 51.8 Wikg > 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.09 W/kq SAR for nominal Body TSL parameters normalized to 1W 24.0 Wikg £ 16.5 % (k=2) Certificate No: D2450V2—930_Nov14 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS108) Antenna Parameters with Head TSL Impedance, transformed to feed point 55.5 Q 4+ 1.7 jQ Return Loss — 25.2 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 51.0 Q + 3.3 jQ Return Loss — 29.4 dB General Antenna Parameters and Design Electrical Delay {one direction) 1.156 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on September 26, 2013 Certificate No: D2450V2—930_Nov14 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 18.11.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 930 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.86 S/m; s = 39; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.53, 4.53, 4.53); Calibrated: 30.12.2013; e Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 18.08.2014 e Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5OAA; Serial: 1001 e DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.79 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 27.5 W/kg SAR(I g) = 13.2 W/kg; SAR(10 g) = 6.09 W/kg Maximum value of SAR (measured) = 17.3 W/kg —5.00 —10.00 —15.00 —20.00 —25.00 0 dB = 17.3 W/kg = 12.38 dBW/kg Certificate No: D2450V2—930_Novi4 Page 5 of 8

Impedance Measurement Plot for Head TSL 18 Nov 2014 13:42:34 (CHI) sii + U Fs 1: 59.549 6 1.6543% 107.46 pH 2 450.000 000 MHz Del Ca Av 16 * H1d CH2 Ca Av 16° H1d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—930_Nov14 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 19.11.2014 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 930 Communication System: UID 0 — CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2.03 S/m; s = 50.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.35, 4.35, 4.35); Calibrated: 30.12.2013; Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 18.08.2014 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.06 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 28.0 W/kg SAR(I g) = 13.3 W/kg; SAR(10 g) = 6.09 W/kg Maximum value of SAR (measured) = 17.3 W/kg dB 0 —5.00 —10.00 ~15.00 —20.00 —25.00 0 dB = 17.3 W/ikg = 12.38 dBW/kg Certificate No: D2450V2—930_Nov14 Page 7 of 8

Impedance Measurement Plot for Body TSL 19 Nov 2014 11:00:02 CHI sii 1 U FS 1: 50.977 4 3.2715 4 212.52 pH 2 450,.000 00 MHz wase Del Ca fAvg 16 H1d CH2 Ca Av 16° H1d START 2 250.000 000 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—930_Nov14 Page 8 of 8

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Quietek—TW (Auden) Certificate No: D5GHzV2—1041_May15 |CALIBRATION CERTIFICATE | Object D5GHzV2 — SN: 1041 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: May 22, 2015 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A US37202783 07—Oct—14 (No. 217—02020) Oct—15 Power sensor HP 8481A MY41092317 07—Oct—14 (No. 217—02021) Oct—15 Reference 20 dB Attenuator SN: 5058 (20k) O1—Apr—15 (No. 217—02131) Mar—16 Type—N mismatch combination SN: 5047.2 / 06327 01—Apr—15 (No. 217—02134) Mar—16 Reference Probe EX3DV4 SN: 3503 30—Dec—14 (No. EX3—3503_Dec14) Dec—15 DAE4 SN: 601 18—Aug—14 (No. DAE4—601_Aug14) Aug—15 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—13) In house check: Oct—16 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—14) In house check: Oct—15 Name Function Signature /Méer Calibrated by: Michael Weber Laboratory Technician Approved by: KatJa Pokovic Technical Manager Issued: May 22, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1041_May15 Page 1 of 16

s 3 wl1796 Calibration Laboratory of S 2L Schweizerischer Kalibrierdienst i $Jys S Schmid & Partner iifi//fi Cc Service suisse d‘étalonnage Engineering AG $s Servizio svizzero di taratura s 5 zy ; devati ; Zeughausstrasse 43, 8004 Zurich, Switzerland 4//r\\\\\\‘ S Swiss Calibration Service Ahibals Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEC 62209—2, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures"; Part 2: "Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters", March 2010 b) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" c) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1041_May15 Page 2 of 16

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.8.8 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz +1 MHz 5300 MHz +1 MHz Frequency 5500 MHz +1 MHz 5600 MHz + 1 MHz 5800 MHz +1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 344 +6 % 4.45 mho/m + 6 % Head TSL temperature change during test <0.5 °C ——— ——— SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.99 W/kg SAR for nominal Head TSL parameters normalized to 1W 79.1 W/kg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.29 W/kg SAR for nominal Head TSL parameters normalized to 1W 22.6 W/kg x 19.5 % (k=2) Certificate No: D5GHzV2—1041_May15 Page 3 of 16

Head TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.76 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.3 +6 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C ———— ——— SAR result with Head TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.42 W/kg SAR for nominal Head TSL parameters normalized to 1W 83.3 W / kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 242 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.9 Wikg + 19.5 % (k=2) Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.0 +6 % 4.73 mho/m + 6 % Head TSL temperature change during test <0.5 °C ——— ~—— SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.31 W/kg SAR for nominal Head TSL parameters normalized to 1W 82.1 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.37 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.4 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1041_May15 Page 4 of 16

Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 33.9 16 % 4.83 mho/m + 6 % Head TSL temperature change during test <0.5 °C ——— ——— SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.32 W/kg SAR for nominal Head TSL parameters normalized to 1W 82.2 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.37 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.4 Wikg + 19.5 %(k=2) Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 2 0.2) °C 33.6 16 % 5.03 mho/m # 6 % Head TSL temperature change during test <0.5 °C ———— —— SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.03 Wikg SAR for nominal Head TSL parameters normalized to 1W 79.3 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.29 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.6 Wikg 2 19.5 % (k=2) Certificate No: DSGHzV2—1041_May15 Page 5 of 16

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 47.3 26 % 5.43 mho/m # 6 % Body TSL temperature change during test <0.5 °C ——— =—— SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.43 W/kg SAR for nominal Body TSL parameters normalized to 1W 73.8 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.08 Wikg SAR for nominal Body TSL parameters normalized to 1W 20.6 Wikg # 19.5 %(k=2) Body TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.42 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.1 6 % 5.56 mho/m + 6 % Body TSL temperature change during test <0.5°C «> w—= SAR result with Body TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Bady TSL Condition SAR measured 100 mW input power 7.44 Wikg SAR for nominal Body TSL parameters normalized to 1 W 73.9 Wikg + 19.9 %(k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.08 W/kg SAR for nominal Body TSL parameters normalized to 1W 20.6 Wikg a 19.5 % (k=2) Certificate No: D5GHzV2—1041_May15 Page 6 of 16

Body TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 £0.2) °C 46.8 16 % 5.82 mho/m + 6 % Body TSL temperature change during test <0.5 °C =——— «— SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.72 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.7 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.14 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.2 Wikg + 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.6 +6 % 5.96 mho/m + 6 % Body TSL temperature change during test <0.5 °C ——— ——— SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.91 Wikg SAR for nominal Body TSL parameters normalized to 1W 78.6 W/kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.19 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.7 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1041_May15 Page 7 of 16

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 +0.2) °C 46.3 +6 % 6.23 mho/m + 6 % Body TSL temperature change during test <0.5 °C i== s== SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.72 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.7 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.14 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.2 Wikg »19.5 % (k=2) Certificate No: DSGHzV2—1041_May15 Page 8 of 16

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 48.5 Q — 6.8 jQ Return Loss —23.1 dB Antenna Parameters with Head TSL at 5300 MHz Impedance, transformed to feed point 49.1 Q —3.4 jQ Retur Loss — 28.9 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point 49.4 Q — 3.0 jQ Return Loss — 30.3 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 55.6 Q — 3.6 jQ Return Loss —24.0 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 55.7 Q — 0.3 jQ Return Loss ~25.4 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 48.5 Q — 5.5 jQ Return Loss —24.8 dB Antenna Parameters with Body TSL at 5300 MHz Impedance, transformed to feed point 48.9 Q — 2.7 jQ Return Loss — 30.7 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 49.6 Q — 1.7 jQ Return Loss — 35.0 dB Certificate No: D5GHzV2—1041_May15 Page 9 of 16

Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 56.0 Q — 2.2 jQ Return Loss —24.4 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 56.0 Q + 0.8 jQ Return Loss — 24.9 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.199 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 30, 2005 Certificate No: D5GHzV2—1041_May15 Page 10 of 16

DASY5 Validation Report for Head TSL Date: 22.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole S5SGHz; Type: D5GHzV2; Serial: DSGHzV2 — SN: 1041 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: £ = 5200 MHz; 0 =4.45 $/m; & = 34.4; p = 1000 kg/m* , Medium parameters used: £= 5300 MHz; o = 4.54 S/m; & = 34.3; p = 1000 kg/m* , Medium parameters used: f = 5500 MHz; 0 = 4.173 S/m; & = 34; p = 1000 kg/m3 , Medium parameters used: £ = 5600 MHz; 0 = 4.83 S/m; s:= 33.9; p = 1000 kg/m> , Medium parameters used: £= 5800 MHz; 0 = 5.03 S/m; & =33.6; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASY532 Configuration: «_ Probe: EX3DV4 — SN3503; ConvF(5.51, 5.51, 5.51); Calibrated: 30.12.2014, ConvF(5.21, 5.21, 5.21);, Calibrated: 30.12.2014, ConvF(5.12, 5.12, 5.12); Calibrated: 30.12.2014, ConvF(4.92, 4.92, 4.92), Calibrated: 30.12.2014, ConvF(4.9, 4.9, 4.9); Calibrated: 30.12.2014; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAEA4 Sn601; Calibrated: 18.08.2014 « Phantom: Flat Phantom 5.0 (front); Type: QDOOOP5OAA; Serial: 1001 «_ DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurementgrid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.97 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 28.9 W/kg SAR(I g) =7.99 W/kg; SAR(10 g) = 2.29 W/kg Maximum value of SAR (measured) = 18.1 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.94 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 31.6 W/kg SAR(1 g) = 8.42 W/kg; SAR(10 g) = 2.42 W/kg Maximum value of SAR (measured) = 19.3 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.48 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(I g) =8.31 W/kg; SAR(10 g) = 2.37 W/kg Maximum value of SAR (measured) = 19.5 W/kg Certificate No: D5GHzV2—1041_May15 Page 11 of 16

Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurementgrid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.21 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 32.6 W/kg SAR(1 g) = 8.32 W/kg; SAR(10 g) = 2.37 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.17 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(1 g) = 8.03 W/kg; SAR(10 g) = 2.29 W/kg Maximum value of SAR (measured) = 19.1 W/kg dB —6.00 —12.00 —18.00 —24.00 —30.00 0 dB = 18.1 W/kg = 12.58 dBW/kg Certificate No: D5GHzV2—1041_May15 Page 12 of 16

Impedance Measurement Plot for Head TSL 21 May 2015 15:18:16 CHI sii 4 ouors 1: 48.490 a —6.7715 0 4.5199 pF 5 200.000 000 MHz T * CH1 Markers bes 2: 49419 a —3.4297 a ter 5.30000 GHz 3: 49.428 o —2.4658 a 5.50000 GHz 41 55.627 a 6 —3.5269 a i 5.60000 GHz aonith 5155.664 a i 5. GHz cH2 Del CH2 Markers 2:—28.938 dB Cor 5.30000 GHz 3:—30.344 dB 5.50000 GHz :—23.960 dB fvg 5.60000 GHz 16 5:—25.408 dB 5.90000 GHz H1d START 5 000.000 @00 MHz STOP 6 000.000 000 MHz Certificate No: D5GHzV2—1041_May15 Page 13 of 16

DASY5 Validation Report for Body TSL Date: 21.05.2015 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5SGHzV2; Serial: D5SGHzV2 — SN: 1041 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; o = 5.43 S/m; s =47.3; p = 1000 kg/m3 , Medium parameters used: £= 5300 MHz; 0 = 5.56 $/m; & = 47.1; p = 1000 kg/m? , Medium parameters used: f = 5500 MHz; o = 5.82 S/m; & = 46.8; p = 1000 kg/m* , Medium parameters used: £= 5600 MHz; 0 = 5.96 S/m; & = 46.6; p = 1000 kg/m> , Medium parameters used: £ = 5800 MHz; 0 = 6.23 S/m; &; = 46.3; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS5 (IREE/IRC/ANSI C63.19—2011) DASY52 Configuration: * Probe: EX3DV4 — SN3503; ConvF(4.95, 4.95, 4.95); Calibrated: 30.12.2014, ConvF(4.78, 4.78, 4.78), Calibrated: 30.12.2014, ConvF(4.45, 4.45, 4.45); Calibrated: 30.12.2014, ConvF(4.35, 4.35, 4.35); Calibrated: 30.12.2014, ConvF(4.32, 4.32, 4.32); Calibrated: 30.12.2014; * Sensor—Surface: 1.4mm (Mechanical Surface Detection) «_ Electronics: DAE4 Sn601; Calibrated: 18.08.2014 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 «_ DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.43 V/m; Power Drift= 0.01 dB Peak SAR (extrapolated) = 28.6 W/kg SAR(I g) =7.43 W/kg; SAR(10 g) =2.08 W/kg Maximum value of SAR (measured) = 17.6 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.53 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 29.5 W/kg SAR(L g) = 7.44 W/kg: SAR(10 g) = 2.08 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.24 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 32.7 W/kg SAR(I g) =7.72 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 19.0 W/kg Certificate No: D5GHzV2—1041_May15 Page 14 of 16

Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurementgrid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.16 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 34.7 W/kg SAR(I g) =7.91 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 19.4 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 55.62 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 35.5 W/kg SAR(1 g) =7.72 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 18.7 W/kg —6.00 —12.00 ~18.00 —24.00 —30.00 0 dB = 17.6 W/kg = 12.46 dBW/kg Certificate No: D5GHzV2—1041_May15 Page 15 of 16

Impedance Measurement Plot for Body TSL 21 May 2015 15:17:40 CHI sin q uors 1: 48.496 a —5.4844 a 5.5907 pF 5 200.000 000 MHz »~ * * CH1 Markers De1 2:48.896 a —2.6836 a tot 5.30000 oz # 49,633 a —1.7344 a 5.50000 GHz 4: 56.000 a fya —2,2461 5.60000 6Hza 5: 56,000 a 8.7969 & 5.80000 GHz H1d CH2 Del CH2 Markers :—30.657 dB Cor 5.30000 GHz :—34.981 dB 5.50000 GHz 1—24.969 dB fvg 5.60000 GHz 16 5:—24.963 dB 5.90000 6Hz Hid START 5 000.000 000 MHz STOP 6 000.000 000 MHz Certificate No: D5GHzV2—1041_May15 Page 16 of 16


Document Created: 2016-04-07 15:42:32
Document Modified: 2016-04-07 15:42:32
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC