User Manual 1

FCC ID: PD97260H

Users Manual

Download: PDF

FCCID_2244759

Regulatory, Safety and
Environmental Notices
User Guide

© Copyright 2008–2011 Hewlett-Packard
Development Company, L.P.

Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. ENERGY STAR is
a registered mark owned by the U.S.
government. Java is a trademark of Sun
Microsystems. Microsoft, Windows, and
Windows Vista are U.S. registered
trademarks of Microsoft Corporation.

The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.

Third Edition: August 2011

First Edition: February 2011

Document Part Number: 653267-003

U.S. modem declarations .................................................................................................. 13
Canada modem statements ............................................................................................... 15
Japan modem statements ................................................................................................. 15
New Zealand modem statements ...................................................................................... 15
Voice support .................................................................................................... 16
Power cord notice ............................................................................................................................... 16
Japan power cord notice .................................................................................................... 16
DC plug of external HP power supply ................................................................................ 17
Macrovision Corporation notice .......................................................................................................... 17

2 Safety notices ................................................................................................................................................ 18
Heat-related safety warning notice ..................................................................................................... 18
Potential safety conditions notice ....................................................................................................... 18
User-replaceable battery notices ........................................................................................................ 18
Headset and earphone volume level notice ....................................................................................... 19
Power cord notices ............................................................................................................................. 19
Cleaning the keyboard ....................................................................................................................... 19
Travel notice ....................................................................................................................................... 19
Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 19

3 Environmental notices ................................................................................................................................. 20
Electronic hardware and battery recycling ......................................................................................... 20
Disposal of waste equipment by users in private households in the European Union ....................... 20
Chemical substances ......................................................................................................................... 21
China material content declarations ................................................................................................... 21
Japan material content declaration .................................................................................................... 23
Mexico Sustainable Energy Use Law ................................................................................................. 24
Turkey EEE regulation ....................................................................................................................... 24
Ukraine Restriction of Hazardous Substances ................................................................................... 24
Perchlorate material—special handling may apply ............................................................................ 24

Index ................................................................................................................................................................... 25

iv

1 Regulatory notices

This guide provides country- and region-specific non-wireless and wireless regulatory notices and
compliance information for the computer product. Some of these notices may not apply to your
product.

One or more integrated wireless devices may be installed. In some environments, the use of wireless
devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near
explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use
of this product, ask for authorization to use it before you turn it on.

To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedure
below that corresponds to the operating system running on your computer.

For Windows® XP Professional and Windows XP Home, follow these steps:

1. Select Start > My Computer.

2. If the left pane, select View System Information > Hardware tab > Device Manager.

For Windows Vista®, follow these steps:

1. Select Start > Computer > System properties.

2. In the left pane, click Device Manager.

For later Windows operating systems, such as Windows 7, follow these steps:

▲ Select Start > Control Panel > System and Security > Device Manager.

For non-Windows operating systems, follow the instructions provided by your operating system to
identify a hardware device such as a wireless LAN (WLAN) network device.

Regulatory markings for your country or region may be located on the bottom of the product, either
under the battery, under a user-removable door (or some other user-accessible location), or on the
wireless or modem module.

To view the FCC IDs for any radio modules in your notebook (Bluetooth®, WLAN, or WWAN), follow
these steps:

1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup
Menu" message is displayed at the bottom of the screen.

2. Press f10 to enter BIOS Setup.

3. Select the System Configuration menu.

The FCC IDs are displayed at the bottom of the screen.

1

CAUTION: Devices not for sale or use in the United States may not have an FCC ID.

Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.

● Consult the dealer or an experienced radio or television technician for help.

Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by HP may void the user's authority to operate the equipment.

Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made
with shielded cables having metallic RFI/EMI connector hoods.

2 Chapter 1 Regulatory notices

Brazil notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.

Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a
campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL.

Canada notices
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations. If this device has WLAN or Bluetooth capability, the device complies with
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.

CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to
its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be
used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful
interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user
of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference
with and/or damage to this device.

The antennas for this device are not replaceable. Any attempt at user access will damage your
computer.

Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

European Union Regulatory notices
Products bearing the CE marking comply with the following EU Directives:

● Low Voltage Directive 2006/95/EC

● EMC Directive 2004/108/EC

● Ecodesign Directive 2009/125/EC where applicable

CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by
HP.

If this product has wired and/or wireless telecommunications functionality, it also complies with the
essential requirements of EU Directive R&TTE Directive 1999/5/EC.

Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or
product family and available (in English only) either within the product documentation or at the
following Web site: www.hp.eu/certificates (type the product number in the search box).

The compliance is indicated by one of the following conformity markings placed on the product:

4 Chapter 1 Regulatory notices

For non-telecommunications products and for EU harmonized telecommunications products, such as
Bluetooth®, within power class below 10 mW.

For EU non-harmonized telecommunications products (if applicable, a 4-digit notified body number is
inserted between CE and ! (the exclamation mark).

Please refer to the regulatory label provided on the product.

The telecommunications functionality of this product may be used in the following EU and EFTA
countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,
Switzerland, and United Kingdom.

The telephone connector (not available for all products) is intended for connection to analog
telephone networks.

NOTE: For products with wireless LAN devices, some countries may have specific obligations or
special requirements about the operation of wireless LAN networks such as indoor use only or
restrictions of the channels available. Be sure that the country settings of the wireless network are
correct.

In France, certain restrictions apply for the 2.4-GHz wireless LAN operation of this product. This
product may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to
13). For outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be
used. For the latest requirements, see http://www.arcep.fr.

The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS: HQ-TRE,
Herrenberger Strasse 140, 71034 Boeblingen, GERMANY.

Products with HP Mobile Broadband Modules
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY
RADIATION.

The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device is
designed not to exceed the limits for exposure to radio frequency (RF) recommended by international
guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels
of RF radiation for the general population. The guidelines were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The device also meets
the European R&TTE directives, including the protection of the health and the safety of the user and
any other person.

European Union Regulatory notices 5

The exposure standard for mobile devices employs a unit of measurement known as the Specific
Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions
with the device transmitting at its highest certified power level in all tested frequency bands. The
actual SAR of the device while operating can be well below the maximum value, because the device
operates at multiple power levels and uses only the power required to reach the network.

When installed in the notebook computer, this device meets RF exposure guidelines when the
antennas are positioned at a minimum distance from the body. In order to transmit data or messages,
this device requires a quality connection to the network. In some cases, transmission of data or
messages may be delayed until such a connection becomes available. Be sure that the
recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public
is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a
substantial margin of safety to give additional protection for the public and to account for any
variations in measurements. SAR values may vary depending on national reporting requirements and
the network band.

This equipment incorporates a radio transmitting device. In normal use, a separation distance of 20
cm ensures that radio frequency exposure levels comply with the Australian and New Zealand
Standards.

Ergonomics notice
Germany
Mobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitable
only for short-time use of VDU tasks. When a mobile computer is used for display work tasks where
the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is
required. Depending on the application and task, an adequate external monitor may also be
necessary to attain working conditions comparable to a workstation setup.

Ref: EK1-ITB 2000:2008

This device is intended for use at visual display workplaces in compliance with BildscharbV, only with
external keyboard and adequate external monitor.

During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may
occur which result in reduced readability.

Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen
und sind nur für kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobiler
Computer für Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG
(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig.
Abhängig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich
sein, um vergleichbare Arbeitsbedingungen zu einem stationären Arbeitsplatz zu erreichen.

Ref: EK1-ITB 2000:2008

Das Gerät ist für die Benutzung am Bildschirmarbeitsplatz gemäß BildscharbV nur mit externer
Tastatur und geeignetem Monitor vorgesehen.

6 Chapter 1 Regulatory notices

Bei mobiler Nutzung mit ungünstigen Lichtverhältnissen (z.B. direkte Sonneneinstrahlung) kann es zu
Reflexionen und damit zu Einschränkungen der Lesbarkeit der dargestellten Zeichen kommen.

Japan notices

Wireless LAN 802.11b devices

Wireless LAN 802.11g devices

Bluetooth devices

Japan notices 7

Wireless LAN, Wireless WAN, and Bluetooth certification markings
This product contains certified radio equipment.

South Korea notice

Mexico notice
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) este equipo puede que
no cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferencia
que pueda ser causada por la operación no deseada.

Singapore wireless notice
Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft
is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network.
Failure to observe this instruction may lead to suspension or denial of cellular services to the
offender, or legal action, or both.

Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where
blasting operations are in progress.

As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of
the equipment and for the safety of personnel, no part of the human body should be allowed to come
too close to the antennas during operation of the equipment.

This device has been designed to comply with applicable requirements for exposure to radio waves,
based on scientific guidelines that include margins intended to assure the safety of all people,
regardless of health and age. These radio wave exposure guidelines employ a unit of measurement
known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized
methods, with the phone transmitting at its highest certified power level in all used frequency bands.
The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the
limit of 2 watts per kilogram, averaged over 10 grams of tissue.

8 Chapter 1 Regulatory notices

Thailand WWAN wireless notice
This telecom equipment has complied with NTC regulations.

Taiwan notices
Wireless LAN 802.11a devices

Wireless LAN 802.11b devices

Airline travel notice
Use of electronic equipment onboard commercial aircraft is at the discretion of the airline.

Thailand WWAN wireless notice 9

Laser compliance
WARNING! Use of controls or adjustments, or performance of procedures other than those
specified in the laser product installation guide, may result in hazardous radiation exposure. To
reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside.

Do not operate controls, make adjustments, or perform procedures to the laser device other than
those specified in the laser product installation guide.

Allow only authorized service providers to repair the unit.

This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or
a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser
Product in accordance with IEC 60825-1 and meets the requirements for safety of that standard.

Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies
with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.

Modem notices
WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device,
always follow basic safety precautions, including the following:

Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool.

Avoid using this product during an electrical storm. There is a remote risk of electric shock from
lightning.

Do not use this product to report a gas leak while in the vicinity of the leak.

Always disconnect the modem cable before opening the equipment enclosure or touching an
uninsulated modem cable, jack, or internal component.

If this product was not provided with a telephone line cord, use only No. 26 AWG or larger
telecommunication line cord.

Do not plug a modem or telephone cable into the RJ-45 (network) jack.

SAVE THESE INSTRUCTIONS

Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network
in the countries and regions whose approval markings are indicated on the product label located on
the bottom of the computer or on the modem.

Refer to the user guide included with the product to ensure that the product is configured for the
country or region in which the product is located. Selecting a country or region other than the one in
which it is located may cause the modem to be configured in a way that violates the
telecommunication regulations/laws of that country or region. In addition, the modem may not function
properly if the correct country or region selection is not made. If, when you select a country or region,
a message appears that states that the country or region is not supported, this means that the
modem has not been approved for use in this country or region and thus should not be used.

Laser compliance 11

U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.
On the bottom of the computer or on the modem is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone
company if you are requested to do so.

Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the
local telephone company. For products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately
shown on the label.

If this HP equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But, if advance notice isn't
practical, the telephone company will notify you as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes to its facilities, equipment, operations, or procedures
that could affect the operation of the equipment. If this happens, the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted telephone
service.

If trouble is experienced with this equipment, call technical support. If the equipment is causing harm
to the telephone network, the telephone company may request that you disconnect the equipment
until the problem is resolved. You should perform repairs only to the equipment specifically discussed
in the “Troubleshooting” section of the user guide, if one is provided.

Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure that the
installation of this HP equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including a fax machine, to send any message unless such message
clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business, other entity, or other
individual sending the message, and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a 900 number or any other
number for which charges exceed local or long-distance transmission charges).

In order to program this information into your fax machine, you should complete the steps outlined in
the faxing software instructions.

12 Chapter 1 Regulatory notices

systems
agere

seicmer

Supplier‘s Declaration of Conformity

Reference Number: Deiphi D1O
Placs ofIsue: Alentoun, PA, USA
Date of ssue: 21st Juy 2005

Agere Systems Inc. at 1110 Amenian Partaway NE, Letigh ValeyCental Canpus, Alentoin, PA 18109
in the Unted States of Amerca, hreby ceriiesthatthe DelphiMdem, beainglabeling
identifeation number US: AGSMDOTBDELPHI comples wih the Federal Communications
Commission‘s (FGC‘) Rules and Requlations 47 CFR Part 66, and the Adminisraive Council on
Terminal Atechments (‘AGTA*adopted technical orteria TIA/EIWS:—968—A3, Telocommunications —
Telephone Terminal Ecuipment ~Technical Requirements or Connectionof Terminal Equipment
To the Telephone Network.

Bd kob
Bred Gand
Techrical Manager

sstems
uge re

M
wream

r‘s Deslaation of Confomnity

ReteeresNunbec DephiDN pevion AIG)
Pacectisne Aenoan, PA UsA
Duiectsse 3 Novnber 2006
Agre Sptens ns t 1110Anaan Pariy1E LabghVol Carges Aertom PA 1800
inte Unied ts fenhembycrtfesbathe Nederbeaing ing Herfcaton
rurber US: AGSNDONEOELPHIconplesuth e FedaConmunicatons Commsons
(FOGRles and Repatns 47 CFR PatGR onthe AdninisratieCoinaon Temnal
Arachnents [ACTAYadoldechncalarera TAEIMIS908968A 960/41, 0602 and
3663 Tecormuncators —Tkpton TeminaExipnent—Techncal Reqirenentor
CoomestonaTerinaEqgpnenToh Tkstone Netvork

BorGan
TetreaMage

Canada modem statements
This equipment meets the applicable Industry Canada technical specifications.

The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any
combination of devices, subject only to the requirement that the sum of the RENs of all devices does
not exceed 5. The REN for this terminal equipment is 1.0.

Japan modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to
the appropriate certification marking below.

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It indicates no
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it
provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that any product is
compatible with all of Telecom's network services.

This equipment is not capable, under all operating conditions, of correct operation at the higher
speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.

If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will
always continue to support pulse dialing.

Use of pulse dialing, when this equipment is connected to the same line as other equipment, may
give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems
occur, the user should not contact the Telecom Faults Service.

Some parameters required for compliance with Telecom's Telepermit requirements are dependent on
the equipment (PC) associated with this device. The associated equipment shall be set to operate
within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period
for any single manual call initiation.

b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of
one attempt and the beginning of the next attempt.

Modem notices 15

c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook
for a period of not less than 5 seconds between the end of one attempt and the beginning of the
next attempt.

d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of
receipt of ringing (So set between 2 and 10).

Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand
law. This requires that at least one party to the conversation is aware that it is being recorded. In
addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the
nature of the personal information collected, the purpose for its collection, how it is to be used, and
what is disclosed to any other party.

This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.

Power cord notice
If you were not provided with a power cord for the computer or for an external power accessory
intended for use with the computer, you should purchase a power cord that is approved for use in
your country or region.

The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage
and current rating marked on the product. In addition, the diameter of the wire must be a minimum of
0.75 mm²/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6½ ft). If you
have questions about the type of power cord to use, contact your authorized service provider.

A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.

Japan power cord notice

16 Chapter 1 Regulatory notices

DC plug of external HP power supply

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.

NOTE: The computer operating voltage and current can be found on the system regulatory label.

Macrovision Corporation notice
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Macrovision Corporation notice 17

2 Safety notices

Heat-related safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).

Potential safety conditions notice
If you notice any of the following conditions (or if you have other safety concerns), do not use the
computer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer.
It is normal for these conditions to appear when an internal electronic component fails in a safe and
controlled manner. However, these conditions may also indicate a potential safety issue. Do not
assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact
technical support for assistance.

User-replaceable battery notices
WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.

WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short
external contacts; do not dispose of in fire or water.

WARNING! Keep the battery away from children.

WARNING! To reduce potential safety issues, only the battery provided with the computer, a
replacement battery provided by HP, or a compatible battery purchased as an accessory from HP
should be used with the computer.

18 Chapter 2 Safety notices

Headset and earphone volume level notice
WARNING! Listening to music at high volume levels and for extended durations can damage one’s
hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and
reduce the amount of time listening at high levels.

For your own safety, before using headsets or earphones, always reset the volume. Some
headphones are louder than other headphones, even if the volume control setting is the same.

Changing the default audio or equalizer settings might lead to higher volume and should only be done
with caution.

For your own safety, headsets or earphones used with this product should comply with the
headphone limits in EN 50332-2.

If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1.

Power cord notices
WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times.

Disconnect power from the computer by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the computer).

If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-
pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter.
The grounding pin is an important safety feature.

WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a
replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP
should be used with the computer.

Cleaning the keyboard
WARNING! To reduce the risk of electric shock or damage to internal components, do not use a
vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris
on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove
dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a
straw extension can be used to blow air around and under the keys to loosen and remove debris.

Travel notice
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to
power the computer with a voltage converter kit sold for appliances.

Norway and Sweden: Cable grounding notice for
products with a TV tuner
CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable
distribution system.

Headset and earphone volume level notice 19

3 Environmental notices

This chapter provides country- and region-specific environmental notices and compliance information.
Some of these notices may not apply to your product.

Electronic hardware and battery recycling
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries. For more information about recycling programs, see the HP Web site at
http://www.hp.com/recycle.

Disposal of waste equipment by users in private
households in the European Union

This symbol means do not dispose of your product with your other household waste. Instead, you
should protect human health and the environment by handing over your waste equipment to a
designated collection point for the recycling of waste electrical and electronic equipment. For more
information, please contact your household waste disposal service.

20 Chapter 3 Environmental notices

Chemical substances
HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council). A chemical information report for this
product can be found at http://www.hp.com/go/reach.

China material content declarations

The Table of Toxic and Hazardous Substances/Elements and their Content

As required by China's Management Methods for Controlling Pollution by Electronic Information
Products

Toxic and Hazardous Substances and Elements

Hexavalent Polybrominated
Lead Mercury Cadmium Chromium Polybrominated diphenyl ethers
Part Name (Pb) (Hg) (Cd) (Cr(VI)) biphenyls (PBB) (PBDE)

Battery X O O O O O

Cables X O O O O O

Camera X O O O O O

Chassis/Other X O O O O O

Flash memory card reader X O O O O O

Chemical substances 21

Toxic and Hazardous Substances and Elements

Hexavalent Polybrominated
Lead Mercury Cadmium Chromium Polybrominated diphenyl ethers
Part Name (Pb) (Hg) (Cd) (Cr(VI)) biphenyls (PBB) (PBDE)

Floppy disk drive X O O O O O

Hard disk drive X O O O O O

Headphones X O O O O O

I/O PCAs X O O O O O

Keyboard X O O O O O

Liquid crystal display X O O O O O
(LCD) panel

Media (CD/DVD/floppy) O O O O O O

Memory X O O O O O

Motherboard, processor, X O O O O O
heat sinks

Mouse X O O O O O

Optical disk drive X O O O O O

Optional docking device X O O O O O

Power adapter X O O O O O

Power supply X O O O O O

Remote control X O O O O O

Smart card/Java™ card X O O O O O
reader

Speakers, external X O O O O O

TV tuner X O O O O O

USB flash memory drive X O O O O O

USB hub X O O O O O

Web camera X O O O O O

Wireless receiver X O O O O O

Wireless cards X O O O O O

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the
limit requirement in SJ/T11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part
is above the limit requirement in SJ/T11363-2006.

All parts named in this table with an X are in compliance with the European Union's RoHS Legislation “Directive 2002/95/EC
of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment” and its amendments.

NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use
conditions of the product such as temperature and humidity.

22 Chapter 3 Environmental notices

Japan material content declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that
manufacturers provide material content declarations for certain categories of electronic products
offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see
the HP Web site at http://www.hp.com/go/jisc0950.

Japan material content declaration 23

Mexico Sustainable Energy Use Law
This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring
disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is
one of many configurations in this model family; the idle mode power consumption of your specific
configuration may vary from the information on the label. Actual power consumption of your product
may be higher or lower than the value reported on the Mexico product energy label due to factors
such as configuration (components and modules chosen) and usage (tasks being performed,
software installed and running, etc.).

Turkey EEE regulation
In Conformity with the EEE regulation

EEE Yönetmeliğine Uygundur

Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution
of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use
of certain dangerous substances in electrical and electronic equipment.

Україна обмеження на наявність небезпечних речовин

Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких
небезпечних речовин в електричному та електронному обладнані, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057.

Perchlorate material—special handling may apply
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate.

This product’s real-time clock battery or coin cell battery may contain perchlorate and may require
special handling when recycled or disposed of in California.

24 Chapter 3 Environmental notices

Index

A G notices
airline travel notice 9 GS Notice 6 airline travel 9
battery 10, 24
B H battery, user replacement 18
battery notice 10, 18, 24 hardware device, identifying 1 Brazil 4
battery recycling 20 headset and earphone volume Canada 4
Brazil notice 4 level notice 19 Canadian French 4
DC plug of external HP power
C J supply 17
cable grounding notice 19 Japan material content environmental 20
Canada modem statement 15 declaration 23 equipment disposal 20
Canada notices 4 Japan modem statement 15 ergonomics 6
Canadian French notices 4 Japan notice 7 European Union 4
China Material Content Japan power cord notice 16 Federal Communications
Declarations 21 Commission 2
K headset and earphone volume
D keyboard notice 19 level 19
DC plug of external HP power Japan 7
supply notice 17 L Japan power cord 16
Declaration of Conformity 3 laser safety notice 11 keyboard 19
disposal notices laser safety 11
battery 24 M Macrovision Corporation 17
battery, user replacement 10 Macrovision Corporation notice
Mexico 8
equipment 20 17 modem 11
Mexico Sustainable Energy Use perchlorate material 24
E Law 24
power cords 16, 19
electronic hardware and battery Mexico wireless notice 8 Singapore 8
recycling 20 modem notices 11 South Korea 8
ENERGY STAR compliance 10 modem statements Taiwan 9
environmental notices 20 Canada 15
Thailand WWAN wireless
equipment disposal notice 20 Japan 15 notice 9
ergonomics notice 6 New Zealand 15
travel 19
European Union notices 4 U.S. 12 Ukraine restriction of hazardous
modifications, Federal substances 24
F Communications Commission 2
Federal Communications P
Commission N
power cord notice 16, 19
cables 2 New Zealand modem statement
modifications 2 15
notice 2

Index 25

R
recycling, electronic hardware and
battery 20

S
Singapore wireless notice 8
South Korea notice 8

T
Taiwan notice 9
Thailand WWAN wireless notice
9
travel notice 19
TV tuner, cable grounding notice
19

U
U.S. modem statement 12
Ukraine restriction of hazardous
substances notice 24

V
voice support 16
volume level notice, headset and
earphone 19

W
wireless LAN devices 3

26 Index

Document Created: 2011-08-17 13:58:22
Document Modified: 2011-08-17 13:58:22

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC