RF Exposure SAR 1

FCC ID: PD9633ANHU

RF Exposure Info

Download: PDF
FCCID_1207726

Date/Time: 9/5/2009 10:43:32 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.9 mho/m; εr = 52.4; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 17.4 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.9 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 107.0 W/kg SAR(1 g) = 53.6 mW/g; SAR(10 g) = 25.2 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 69.7 mW/g 0 dB = 69.7mW/g

Date/Time: 9/5/2009 10:51:27 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 17.4 mW/g

Date/Time: 9/6/2009 10:31:26 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.88 mho/m; εr = 52.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 17.2 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.9 V/m; Power Drift = 0.007 dB Peak SAR (extrapolated) = 105.9 W/kg SAR(1 g) = 53 mW/g; SAR(10 g) = 24.9 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 68.9 mW/g 0 dB = 68.9mW/g

Date/Time: 9/6/2009 10:41:27 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 17.2 mW/g

Date/Time: 9/29/2009 9:26:58 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5200 MHz; σ = 5.21 mho/m; εr = 51; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(4.08, 4.08, 4.08); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.2 GHz d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 34.0 mW/g 5.2 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 88.2 V/m; Power Drift = -0.117 dB Peak SAR (extrapolated) = 262.9 W/kg SAR(1 g) = 77.5 mW/g; SAR(10 g) = 22.3 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 138.1 mW/g 0 dB = 138.1mW/g

Date/Time: 9/29/2009 9:33:21 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 5.2 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 34.3 mW/g

Date/Time: 9/29/2009 10:18:01 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5500 MHz; σ = 5.52 mho/m; εr = 50.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.76, 3.76, 3.76); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.5 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 25.8 mW/g 5.5 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 83.4 V/m; Power Drift = -0.037 dB Peak SAR (extrapolated) = 280.2 W/kg SAR(1 g) = 75.9 mW/g; SAR(10 g) = 21.8 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 132.9 mW/g 0 dB = 132.9mW/g

Date/Time: 9/29/2009 10:25:56 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 5.5 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 32.9 mW/g

Date/Time: 9/29/2009 11:06:44 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5800 MHz; σ = 6.08 mho/m; εr = 49.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.84, 3.84, 3.84); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.8 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.4 mW/g 5.8 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 77.1 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 266.9 W/kg SAR(1 g) = 69.6 mW/g; SAR(10 g) = 19.7 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 127.1 mW/g 0 dB = 127.1mW/g

Date/Time: 9/29/2009 11:12:04 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 5.8 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 31.8 mW/g

Date/Time: 10/1/2009 9:16:58 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5200 MHz; σ = 5.24 mho/m; εr = 50.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(4.08, 4.08, 4.08); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.2 GHz d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 34.1 mW/g 5.2 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 86.1 V/m; Power Drift = -0.106 dB Peak SAR (extrapolated) = 258.2 W/kg SAR(1 g) = 76.8 mW/g; SAR(10 g) = 22.1 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 132.8 mW/g 0 dB = 138.8mW/g

Date/Time: 10/1/2009 9:22:21 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 5.2 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 34.5 mW/g

Date/Time: 10/1/2009 9:58:01 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5500 MHz; σ = 5.55 mho/m; εr = 50.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.76, 3.76, 3.76); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.5 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 26.0 mW/g 5.5 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 84.1 V/m; Power Drift = -0.017 dB Peak SAR (extrapolated) = 284.6 W/kg SAR(1 g) = 76.1 mW/g; SAR(10 g) = 21.4 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 131.2 mW/g 0 dB = 133.6mW/g

Date/Time: 10/1/2009 10:05:56 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 5.5 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 33.1 mW/g

Date/Time: 10/1/2009 11:06:44 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5800 MHz; σ = 6.11 mho/m; εr = 49.4; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.84, 3.84, 3.84); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.8 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.8 mW/g 5.8 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 76.7 V/m; Power Drift = 0.024 dB Peak SAR (extrapolated) = 262.1 W/kg SAR(1 g) = 69.8 mW/g; SAR(10 g) = 19.6 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 126.5 mW/g 0 dB = 127.7mW/g

Date/Time: 10/1/2009 11:15:04 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 5.8 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 31.9 mW/g

Date/Time: 10/2/2009 9:22:43 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5200 MHz; σ = 5.2 mho/m; εr = 50.5; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(4.08, 4.08, 4.08); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.2 GHz d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 33.9 mW/g 5.2 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 88.2 V/m; Power Drift = -0.117 dB Peak SAR (extrapolated) = 262.6 W/kg SAR(1 g) = 77.1 mW/g; SAR(10 g) = 22.3 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 138.0 mW/g 0 dB = 138.0mW/g

Date/Time: 10/2/2009 9:27:32 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 5.2 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 34.3 mW/g

Date/Time: 10/2/2009 9:53:36 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5500 MHz; σ = 5.51 mho/m; εr = 50; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.76, 3.76, 3.76); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.5 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 25.8 mW/g 5.5 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 83.4 V/m; Power Drift = -0.037 dB Peak SAR (extrapolated) = 279.9 W/kg SAR(1 g) = 75.7 mW/g; SAR(10 g) = 21.3 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 132.8 mW/g 0 dB = 132.8mW/g

Date/Time: 10/2/2009 9:59:56 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 5.5 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 32.9 mW/g

Date/Time: 10/2/2009 10:39:23 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5800 MHz; σ = 6.08 mho/m; εr = 49.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.84, 3.84, 3.84); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.8 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.4 mW/g 5.8 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 77.1 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 266.6 W/kg SAR(1 g) = 69.4 mW/g; SAR(10 g) = 19.5 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 127.0 mW/g 0 dB = 127.0mW/g

Date/Time: 10/2/2009 10:47:28 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 5.8 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 31.7 mW/g

Date/Time: 10/4/2009 9:02:53 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5200 MHz; σ = 5.18 mho/m; εr = 50.6; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(4.08, 4.08, 4.08); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.2 GHz d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 33.8 mW/g 5.2 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 88.2 V/m; Power Drift = -0.117 dB Peak SAR (extrapolated) = 261.6 W/kg SAR(1 g) = 77.1 mW/g; SAR(10 g) = 22 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 137.5 mW/g 0 dB = 137.5mW/g

Date/Time: 10/4/2009 9:09:45 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5200 MHz;Duty Cycle: 1:1 5.2 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 34.1 mW/g

Date/Time: 10/4/2009 9:46:12 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5500 MHz; σ = 5.49 mho/m; εr = 50; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.76, 3.76, 3.76); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.5 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 25.7 mW/g 5.5 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 83.4 V/m; Power Drift = -0.037 dB Peak SAR (extrapolated) = 278.8 W/kg SAR(1 g) = 75.4 mW/g; SAR(10 g) = 21.2 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 132.3 mW/g 0 dB = 132.3mW/g

Date/Time: 10/4/2009 9:53:22 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5500 MHz;Duty Cycle: 1:1 5.5 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 32.8 mW/g

Date/Time: 10/4/2009 10:33:41 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5800 MHz; σ = 6.05 mho/m; εr = 49.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(3.84, 3.84, 3.84); Calibrated: 3/23/2009 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 5.8 GHz d=10mm, Pin=250mW/Area Scan (8x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.3 mW/g 5.8 GHz d=10mm, Pin=250mW/Zoom Scan (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 77.1 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 265.6 W/kg SAR(1 g) = 69.1 mW/g; SAR(10 g) = 19.4 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 126.5 mW/g 0 dB = 126.5mW/g

Date/Time: 10/4/2009 10:41:15 AM Test Laboratory: Compliance Certification Services System Performance Check - D5GHzV2 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Communication System: System Check Signal - CW; Frequency: 5800 MHz;Duty Cycle: 1:1 5.8 GHz d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 31.6 mW/g


Document Created: 2009-10-05 10:29:17
Document Modified: 2009-10-05 10:29:17
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC