Modular Approval Letter

FCC ID: PD93945BGX

Cover Letter(s)

Download: PDF
FCCID_620386

TRANSMITTER MODULAR APPROVAL ATTESTATION

January 16, 2006

Federal Communications Commission

Re: Application Modular Approval Certification for FCC ID: PD93945BGX

Gentlemen:

The following attestation addresses the eight requirements to support modular approval as
required by the FCC Public Notice DA00-1407 “Part 15 Unlicensed Modular Transmitter
Approval”

 1   The modular transmitter has its own RF shielding and does not rely upon the shielding
     provided by the device into which it is installed in order to comply with Part 15 limits.
 2   The modular transmitter has buffered modulation/data inputs. All inputs to the
     modules are buffered through the radio circuitry.
 3   The modular transmitter has its own power supply regulator.
 4   The modular transmitter has an antenna that complies with section 15.203 and
     15.204(c) of the FCC rules. It has a UFL type of connector at the transmitter end and is
     soldered to the antenna (depending on OEM configuration). Also the antenna will be
     internal in the OEM host equipment and inaccessible to the user.
 5   The modular transmitter was tested outside of a host desktop computer using a PCI
     extender card. The PCI extender card allows the transmitter to be placed outside of the
     chassis of the host desktop computer.
 6   The modular transmitter will be labeled with its own FCC ID. Also, the OEM host
     computer manufacturer will be informed to display a label referring to the enclosed
     module. The exterior label will read as follows: “Contains Transmitter Module FCC
     ID” or “Contains TXFCCID”.
 7   The modular transmitter is manufactured so that the user cannot influence the operation
     of the transmitter that will operate outside of the scope of the regulations.
 8   The modular transmitter meets the MPE calculations of 47 CFR 1.1307(b)(1). Also,
     SAR data is available if necessary.

If there are any additional questions or if further information is needed, please contact us at
your earliest convenience at (949) 459-7886.

Sincerely,




Johnny Candelas
Aegis Labs, Inc.
Test Technician
       AEGIS LABS, INC 22431 Antonio Parkway B160-417, Rancho Santa Margarita, CA 92688
              949-459-7886 TEL      949-459-7869 FAX       www.aegislabsinc.com



Document Created: 2006-01-16 14:52:20
Document Modified: 2006-01-16 14:52:20

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC