Test Report DFS

FCC ID: PD917265NG

Test Report

Download: PDF
FCCID_2414512

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 FCC LISTED, REGISTRATION Informe de ensayo nº: NUMBER: 720267 Test report No: IC LISTED REGISTRATION NIE: 43117RRF.004 NUMBER IC 4621A-1 Test report USA FCC Part 15.407 CANADA RSS-210, RSS-Gen DYNAMIC FREQUENCY SELECTION (DFS) REQUIREMENTS PCIe M.2 adapter card Identificación del objeto ensayado......................: Antenna Configuration: Identification of item tested WiFi: 2x2 (Tx/Rx) BT: 1x1 (Tx/Rx) WiGig: 1 RFEM array Marca ...................................................................: INTEL Trade Modelo y/o referencia tipo ..................................: 17265NGW (includes family sub-model Model and /or type reference 17265NGW LC) Other identification of the product ....................: Commercial name: INTEL TRI-BAND WIRELESS-AC 17265 FCC ID: PD917265NG IC: 1000M-17265NG Final HW version ................................................: Engineering Sample Final SW version .................................................: Test SW: DRTU_1_7_3_859 Op SW: V17.12.0.0 Serial number ......................................................: WFM:001500F78EB2 BDM:001500F78EB6 WGM:001500F78EB7 Características .....................................................: WiFi 802.11 a/b/g/n/ac + WiGig 802.11ad + BT 4.0 Features Peticionario .........................................................: INTEL MOBILE COMMUNICATIONS Applicant 100 Center Point Circle, Suite 200, Columbia, South Carolina 29210 USA Steven Hackett Tel: 803-216-2344/ FAX: 803-216-2176 steven.c.hackett@intel.com Método de ensayo solicitado, norma...................: USA FCC Part 15.407 (10–1–13 Edition). Unlicensed National Test method requested, standard Information Infrastructure Devices. General technical requirements. USA FCC document FCC 14-30 Revision of part 15 of Comission’s rules for infrastructure (U-NII) devices in the 5 GHz band Released: April 1, 2014. ANSI C63.10-2009: American National Standard for Testing Unlicensed Wireless Devices. CANADA RSS-210 Issue 8 (December 2010). Licence-Exempt Radio Apparatus (All Frequency Bands): Category I Equipment. Report No: (NIE) 43117RRF.004 Page 1 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Annex 9. FCC Order, ET Docket No.03-122 (FCC 06-96): Compliance measurement procedures for unlicensed-national information infrastructure devices operating in the 5.25-5.35 GHz and 5.47- 5.725 GHz bands incorporating dynamic frequency selection (DFS). Guidance for Performing Compliance measurement procedures for unlicensed national information infrastructure devices operating in the 5250-5350MHz and 5470-5725 MHz bands incorporating Dynamic Frequency Selection 905462 D02 UNII DFS Compliance Procedures New Rules v01r01 dated 08/14/2014. Guidance for U-NII client devices without radar detection capability 905462 D03 Client Without DFS New Rules v01r01 v02r01 dated 08/14/2014. Resultado ..............................................................: IN COMPLIANCE Summary Aprobado por (nombre / cargo y firma) ...........: A. Llamas Approved by (name / position & signature) Firmado digitalmente por RF Lab. Manager Alejandro Llamas Rodríguez Fecha: 2014.10.03 12:24:30 +02'00' Fecha de realización ...........................................: 2014-10-03 Date of issue Formato de informe No. ......................................: FDT08_15 Report template No Report No: (NIE) 43117RRF.004 Page 2 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Index Competences and guarantees .........................................................................................................................4 General conditions .........................................................................................................................................4 Uncertainty ....................................................................................................................................................4 Usage of samples ...........................................................................................................................................4 Test sample description .................................................................................................................................5 Test samples supplier ....................................................................................................................................5 Testing period ................................................................................................................................................6 Environmental conditions..............................................................................................................................6 Remarks and comments .................................................................................................................................6 Testing verdicts .............................................................................................................................................7 Appendix A – Test result...............................................................................................................................8 Report No: (NIE) 43117RRF.004 Page 3 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Competences and guarantees AT4 wireless is a laboratory with a measurement facility in compliance with the requirements of Section 2.948 of the FCC rules and has been added to the list of facilities whose measurements data will be accepted in conjuction with applications for Certification under Parts 15 or 18 of the Commission's Rules. Registration Number: 720267. AT4 wireless is a laboratory with a measurement site in compliance with the requirements of RSS 212, Issue 1 (Provisional) and has been added to the list of filed sites of the Canadian Certification and Engineering Bureau. Reference File Number: IC 4621A-1. In order to assure the traceability to other national and international laboratories, AT4 wireless has a calibration and maintenance program for its measurement equipment. AT4 wireless guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at AT4 wireless at the time of performance of the test. AT4 wireless is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of AT4 wireless. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of AT4 wireless. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of AT4 wireless and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the AT4 wireless internal document PODT000. Usage of samples Samples undergoing test have been selected by: the client Sample M/01 is composed of the following elements: Control Nº Description Model Serial Nº Date of reception PCIe M.2 adapter card TA#: H50077-001 43117/017 17265NGW 20/08/2014 Antenna Configuration: WFM:001500F78EB2 WiFi: 2x2 (Tx/Rx) BT: 1x1 (Tx/Rx) BDM:001500F78EB6 WiGig: 1 RFEM array WGM:001500F78EB7 1. Sample M/01 has undergone following test(s). All tests indicated in appendix A. Report No: (NIE) 43117RRF.004 Page 4 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Auxiliary elements used with the sample S/01: Control Nº Description Manufacture Model Serial Nº Date of reception TAG 11/08/2014 43117/01 Laptop PC DELL Latitude E6440 6C6YG12 43117/03 Cable of the DELL --- --- 11/08/2014 AC/DC Adapter 43117/02 AC/DC INTEL DA90PM130 CN-OJCF3V- 11/08/2014 Adapter 48661-46G- 7VGK-A 43117/08 Reference SkyCross WIMAX/WLAN --- 11/08/2014 Antenna 43117/09 Reference SkyCross WIMAX/WLAN --- 11/08/2014 Antenna Interface 26/09/2013 40079/11 --- --- --- extender cable NGFF 30x30 ASS00469- 11/08/2014 43117/13 INTEL PCB00469 001-4694213- Testing board 030 Adapter of the 20/08/2014 38067/38 AC/DC Board SINPRO SPU60-102 07990464 1249 Testing Board --- 1302 --- --- --- 35mmx35mm AIR-LAP1262N-A- --- 4045 Access Point CISCO FTX1550E2C5 K9 38067/28 Laptop PC DELL Latitude E5420 CTFQQL1 08/01/2013 38067/29 Cable of the DELL --- --- 08/01/2013 AC/DC Adapter 38067/30 AC/DC DELL LA90PM111 --- 08/01/2013 Adapter Test sample description The test sample consists of a PCIe M.2 adapter card Antenna Configuration: WiFi: 2x2 (Tx/Rx) BT: 1x1 (Tx/Rx) WiGig: 1 RFEM array. Test samples supplier INTEL MOBILE COMMUNICATIONS 100 Center Point Circle, Suite 200, Columbia, South Carolina 29210 USA Steven Hackett Tel: 803-216-2344/ FAX: 803-216-2176 steven.c.hackett@intel.com Report No: (NIE) 43117RRF.004 Page 5 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Testing period The performed test started on 2014-09-13 and finished on 2014-09-14. The tests have been performed at AT4 wireless. Environmental conditions In the control chamber, the following limits were not exceeded during the test: Min. = 22.0 ºC Temperature Max. = 22.7 ºC Min. = 42.0 % Relative humidity Max. = 44.8 % Shielding effectiveness > 100 dB Electric insulation > 10 kΩ Reference resistance to earth < 0,5 Ω In the semianechoic chamber (21 meters x 11 meters x 8 meters), the following limits were not exceeded during the test. Min. = 20.7 ºC Temperature Max. = 20.9 ºC Min. = 43.1 % Relative humidity Max. = 45.5 % Min. = 1010 mbar Air pressure Max. = 1013 mbar Shielding effectiveness > 100 dB Electric insulation > 10 kΩ Reference resistance to earth < 0,5 Ω < ±4 dB at 10 m distance between item under test and Normal site attenuation (NSA) receiver antenna, (30 MHz to 1000 MHz) More than 75% of illuminated surface is between 0 and 6 Field homogeneity dB (26 MHz to 1000 MHz). Remarks and comments 1: Used instrumentation: Radiated Measurements Last Cal. Cal. due date date Semianechoic Absorber Lined Chamber 1. N.A. N.A. IR 11. BS 2. Control Chamber IR 12.BC N.A. N.A. Double-ridge Guide Horn antenna 1-18 3. 2013/11 2016/11 GHz SCHWARZBECK BBHA 9120 D 4. EMI Test Receiver R&S ESU 26 2013/08 2015/08 Vector signal generator Rodhe 6. 2014/05 2016/05 SMU200A 7. Oscilloscope Tektronix DPO4104B 2013/06 2014/06 Double-ridge Guide Horn antenna 1-18 8. 2013/11 2016/11 GHz SCHWARZBECK BBHA 9120 D Report No: (NIE) 43117RRF.004 Page 6 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Testing verdicts Not applicable ......................................................................... : N/A Pass .......................................................................................... : P Fail ........................................................................................... : F Not measured .......................................................................... : N/M DFS Requirements Prior to Use of a Channel VERDICT NA P F NM Non-Occupancy Period P DFS Detection Threshold NA Channel Availability Check Time NA Uniform Spreading NA U-NII Detection Bandwidth NA DFS requirements during normal operation VERDICT NA P F NM DFS Detection Threshold NA Channel Closing Transmission Time P Channel Move Time P U-NII Detection Bandwidth NA Report No: (NIE) 43117RRF.004 Page 7 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Appendix A – Test result Report No: (NIE) 43117RRF.004 Page 8 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 INDEX TEST CONDITIONS .......................................................................................................................................................... 10 Section 15.407 Subclause (h) (2). RSS-210 A.9.3. Channel Closing Time, Channel Move Time and Non-occupancy period measurement ............................................................................................................................................................. 13 Report No: (NIE) 43117RRF.004 Page 9 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 TEST CONDITIONS Power supply (V): Vnominal = 3.3 Vdc Type of power supply = DC voltage from NGW 30x30 test board. Type of antenna = External attachable PIFA antenna. Declared Gain for antenna: 5250 – 5350MHz – 3.73dBi 5470 – 5725MHz – 4.77dBi The test set-up was made in accordance to the general provisions of Compliance measurement procedures for unlicensed-national information infrastructure devices operating in the 5.25-5.35GHz and 5.47-5.725GHz Bands incorporating Dynamic Frequency Selection (FCC Order, ET Docket No.03-122 (FCC 06-96). For radio testing purposes the EUT card was installed in a test fixture. The test fixture is connected to a laptop computer and dc power supplied. During the test a streaming video file (MPEG) is sent from the master device (connected to a server via an Ethernet interface) to the laptop computer. The PC was using the Intel test SW: 17.12.0.0. The manufacturer declared values for the EUT operational characteristics that affect DFS are as follows: - Client Device with no DFS (no In Service Monitoring, no Ad-Hoc mode). - Maximum declared antenna gain (dBi) for 5.25-5.35 GHz is 3.73 dBi & 5.47-5.725 GHZ is 4.77 dBi. DFS Measurement instrumentation A vector signal generator SMU200A is used as the radar-generating source. The waveform of pulses and burst configuration are programmed using the Pulse sequence software of Rohde&Schwarz. The output of the Vector signal generator is connected to a calibrated horn antenna. Channel monitoring is implemented by using a spectrum analyzer and digital storage oscilloscope. The analyzer is configured in a zero-span mode, center frequency set to the radar waveform´s frequency or the center frequency of the EUT´s operating channel. The IF output of the spectrum analyzer is connected to one input of the oscilloscope. The output of the Pulse function generator is used to send the modulating signal. This output is also connected to a second input on the oscilloscope and the oscilloscope display both the RF channel traffic and the radar pulses on its display. Report No: (NIE) 43117RRF.004 Page 10 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 The master and slave (EUT) devices are placed inside an anechoic chamber. The simulated radar waveform is transmitted using a directional calibrated horn antenna toward the unit performing the radar detection (master). The radar signal level at the master device is verified by measuring the continuous signal level from the Vector signal generator using a reference measuring antenna placed at the master’s location and connected to a spectrum analyzer. The signal level is calculated from the measured level at the reference antenna and taking into account the cable loss and reference antenna gain. Applied level (dBm) = M (dBm) – Gref (dBi)+ L (dB) Where: M (dBm): Measured level in the spectrum analyzer Gref (dBi): Reference antenna gain L (dB): Loss of connecting cable between antenna and spectrum analyzer. The antenna connected to the channel monitoring system is positioned to allow both master and slave (EUT) transmissions to be observed, with the level of the EUT’s transmissions between at least 10 dB higher than those from the master device. Report No: (NIE) 43117RRF.004 Page 11 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 The setup is shown in the next figure. DFS Channel Closing Transmission Time and Channel Move Time measurement method These times are measured by applying a burst of radar signal and observing the transmissions in the operating channel. The time between the end of the applied radar burst and the end of transmissions on the channel is the Channel Move Time. The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. DFS Channel Non Occupancy Period measurement method The channel is monitored for 30 minutes to check that there are no transmissions on the channel over the required non-occupancy period. This is achieved by allowing the analyzer to perform a sweep over a 30 minutes period to capture any transmissions on the channel after the detection of the radar waveform. Report No: (NIE) 43117RRF.004 Page 12 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 Section 15.407 Subclause (h) (2). RSS-210 A.9.3. Channel Closing Time, Channel Move Time and Non- occupancy period measurement The steps below define the procedure to determine the above mentioned parameters when a radar Burst with a level equal to the DFS Detection Threshold + 1dB is generated on the Operating Channel of the U-NII device. Operating Frequency: 5.67 GHz. Channel 136 BW=40MHz. Radar type: Radar type 1 RESULTS: (See next plots) CH134 n40 mode FCC part 15.407 (h)(2) Tests Result Summary Description Radar Radar Measured Requirement Result Type Frequency (MHz) Value Channel Closing transmission time 1 5670 1.2 ms 200 ms + an PASS aggregate of 60 ms. Channel move time 1 5670 3.2 ms 10 seconds PASS Non-occupancy period 1 5670 >33 >30 minutes PASS minutes Measurement uncertainty Timing ± 0.057 ms DFS Detection Threshold Level ± 3.79 dB Report No: (NIE) 43117RRF.004 Page 13 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 The upper trace in the above plot has 10 seconds of EUT final transmission data and the lower trace shows the simulated radar signal. Report No: (NIE) 43117RRF.004 Page 14 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 This plot provides a zoom-in to show the 200 ms time interval after the radar burst. Report No: (NIE) 43117RRF.004 Page 15 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 This plot provides a zoom-in to show the 600 ms time interval after the radar burst. This shows that there were not any transmissions after 200 ms following the radar burst. Report No: (NIE) 43117RRF.004 Page 16 of 17 2014-10-03

AT4 wireless, S.A. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España www.at4wireless.com · C.I.F. A29 507 456 The non-occupancy period plot was made over a 2000-seconds (33.3 minutes) time period that included the channel move period plus a minimum of 30 minutes thereafter. No transmissions were observed in the 30 minutes following the channel move time. Report No: (NIE) 43117RRF.004 Page 17 of 17 2014-10-03


Document Created: 2014-10-03 12:24:30
Document Modified: 2014-10-03 12:24:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC