RF Exposure SAR 2

FCC ID: PD9112BNHU

RF Exposure Info

Download: PDF
FCCID_1206336

Date/Time: 11/13/2009 9:24:45 PM Test Laboratory: Compliance Certification Services Laptop - Lapheld DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11b M-ch/Area Scan (8x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.020 mW/g 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.02 V/m; Power Drift = 0.658 dB Peak SAR (extrapolated) = 0.037 W/kg SAR(1 g) = 0.018 mW/g; SAR(10 g) = 0.00854 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.022 mW/g

Date/Time: 11/13/2009 5:00:46 PM Test Laboratory: Compliance Certification Services Tablet - Primary landscape DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11b M-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.046 mW/g 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.71 V/m; Power Drift = -0.397 dB Peak SAR (extrapolated) = 0.076 W/kg SAR(1 g) = 0.037 mW/g; SAR(10 g) = 0.020 mW/g Info: Interpolated medium parameters used for SAR evaluation.

Date/Time: 11/13/2009 7:49:41 PM Test Laboratory: Compliance Certification Services Tablet - Secondary landscape DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11b M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.009 mW/g 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.29 V/m; Power Drift = -0.609 dB Peak SAR (extrapolated) = 0.016 W/kg SAR(1 g) = 0.00716 mW/g; SAR(10 g) = 0.00375 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.010 mW/g

Date/Time: 11/13/2009 2:56:02 PM Test Laboratory: Compliance Certification Services Tablet - Secondary Portrait DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11b M-ch/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.247 mW/g 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.71 V/m; Power Drift = -0.457 dB Peak SAR (extrapolated) = 0.393 W/kg SAR(1 g) = 0.191 mW/g; SAR(10 g) = 0.104 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.251 mW/g

Date/Time: 11/13/2009 3:19:32 PM Test Laboratory: Compliance Certification Services Tablet - Secondary Portrait DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 802.11b M-ch/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.252 mW/g

Date/Time: 11/13/2009 4:04:31 PM Test Laboratory: Compliance Certification Services Tablet - Secondary Portrait DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11n HT20 M-ch/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.217 mW/g 802.11n HT20 M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.7 V/m; Power Drift = -0.144 dB Peak SAR (extrapolated) = 0.364 W/kg SAR(1 g) = 0.166 mW/g; SAR(10 g) = 0.086 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.216 mW/g

Date/Time: 11/13/2009 8:27:21 PM Test Laboratory: Compliance Certification Services Tablet - Lapheld DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.92 mho/m; εr = 53.1; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 802.11b M-ch/Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.043 mW/g 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.08 V/m; Power Drift = 0.546 dB Peak SAR (extrapolated) = 0.076 W/kg SAR(1 g) = 0.040 mW/g; SAR(10 g) = 0.021 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.051 mW/g

Date/Time: 11/13/2009 8:49:54 PM Test Laboratory: Compliance Certification Services Tablet - Lapheld DUT: Lenovo; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 802.11b M-ch/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.053 mW/g


Document Created: 2009-11-16 10:26:50
Document Modified: 2009-11-16 10:26:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC