RF SAR Test Plots

FCC ID: PD911230BNHU

RF Exposure Info

Download: PDF

FCCID_1456214

Date/Time: 4/4/2011 6:50:49 PM

Test Laboratory: UL CCS

Antenna Vertical Up
DUT: Intel; Type: NA; Serial: NA

Communication System: 802.11b/g 2.4GHz; Frequency: 2437 MHz;Duty Cycle: 1:1
Medium parameters used (interpolated): f = 2437 MHz; σ = 1.963 mho/m; εr = 51.258; ρ = 1000 kg/m3
Phantom section: Flat Section

Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C

DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(6.86, 6.86, 6.86); Calibrated: 1/24/2011
- Sensor-Surface: 3mm (Mechanical Surface Detection), Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1239; Calibrated: 11/17/2010
- Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099
- Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595)

802.11b/M-ch/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.103 mW/g

802.11b/M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm
Reference Value = 7.173 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 0.178 W/kg
SAR(1 g) = 0.092 mW/g; SAR(10 g) = 0.044 mW/g
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.123 mW/g

Document Created: 2019-09-11 13:07:25
Document Modified: 2019-09-11 13:07:25

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC