RF Exposure System Check Plots

FCC ID: PD911230BNHU

RF Exposure Info

Download: PDF
FCCID_1456213

Date/Time: 4/4/2011 10:26:59 AM Test Laboratory: UL CCS System Check_D2450V2_SN 706 DUT: Dipole D2450V2 SN: 706; Type: D2450V2; Serial: 706 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.98 mho/m; εr = 51.211; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.86, 6.86, 6.86); Calibrated: 1/24/2011 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) D2600V2/Pin=100 mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 7.548 mW/g D2600V2/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 62.442 V/m; Power Drift = 0.00091 dB Peak SAR (extrapolated) = 11.009 W/kg SAR(1 g) = 5.3 mW/g; SAR(10 g) = 2.43 mW/g Maximum value of SAR (measured) = 7.572 mW/g 0 dB = 7.570mW/g

Date/Time: 4/4/2011 10:41:47 AM Test Laboratory: UL CCS System Check_D2450V2_SN 706 DUT: Dipole D2450V2 SN: 706; Type: D2450V2; Serial: 706 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 D2600V2/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.618 mW/g

Date/Time: 4/19/2011 11:47:31 AM Test Laboratory: UL CCS System Performance Check - D2450V2 DUT: Dipole D2450V2 SN: 706; Type: D2450V2; Serial: 706 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.976 mho/m; εr = 51.582; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY5 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.86, 6.86, 6.86); Calibrated: 1/24/2011 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1239; Calibrated: 11/17/2010 - Phantom: ELI 4.0; Type: QDOVA001BB; Serial: 1099 - Measurement SW: DASY52, Version 52.6 (1);SEMCAD X Version 14.4.2 (2595) Configuration/d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 7.037 mW/g Configuration/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 62.616 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 10.858 W/kg SAR(1 g) = 5.28 mW/g; SAR(10 g) = 2.44 mW/g Maximum value of SAR (measured) = 6.999 mW/g 0 dB = 7.000mW/g

Date/Time: 4/19/2011 12:02:58 PM Test Laboratory: UL CCS System Performance Check - D2450V2 DUT: Dipole D2450V2 SN: 706; Type: D2450V2; Serial: 706 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Configuration/d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 7.010 mW/g


Document Created: 2011-04-19 12:16:27
Document Modified: 2011-04-19 12:16:27
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC