Test Report JBP

FCC ID: PD911000D2

Test Report

Download: PDF
FCCID_2890584

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TEST REPORT CONCERNING THE COMPLIANCE OF AN INTEL® WIRELESS GIGABIT 11000, MODEL 11000D2W, 60 GHZ ONLY, TESTED AS A SYSTEM TOGETHER WITH WIGIG DOCKING STATION, BRAND INTEL, MODEL WIDOCK-SDS WITH 47 CFR PART 15-SUBPART B (10-1-14 Edition) AND THE REQUIREMENTS OF INDUSTRY CANADA: ICES-003 (ISSUE 5, AUGUST 2012). 15121601.f02 January 11, 2016 : FCC listed 90828 : Industry Canada 2932G-2 : R&TTE and EMC Notified Body 1856 : TÜV Rheinland Nederland B.V. P.O. Box 37 9350 AA Leek (NL) Eiberkamp 10 9351 VT Leek (NL) Telephone: +31 594 505005 Telefax: +31 594 504804 Internet: www.tuv.com/nl E-mail: products@nl.tuv.com Project number: 15121601.f01 Page 1 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS MEASUREMENT/TECHNICAL REPORT Intel Mobile Communication SAS (France) Model: Wireless Gigabit 11000D2, including WiGig Docking Station WiDock-SDS, tested only as 60 GHz wireless streaming This report concerns: Original certification Class 2 change Verification / DoC Equipment type: WiGig card and a WiGig Docking Station Report prepared by: Name : T.E.T. Koning Company name : TÜV Rheinland Nederland B.V. Address : Eiberkamp 10 Postal code/city : 9351 VT Leek Mailing address : P.O. Box 37 Postal code/city : 9350 AA Leek Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : products@nl.tuv.com The data taken for this test and report herein was done in accordance with 47 CFR Part 15, Subpart B (10-1-14 edition), ICES-003 (Issue 5, August 2012) and the measurement procedures of ANSI C63.4-2013. TÜV Rheinland Nederland B.V. at Leek, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: January 11, 2016 Signature: T. Koning Senior Engineer EMC TÜV Rheinland Nederland B.V. Project number : 15121601.f01 Page 2 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS Summary The device under test does:  fulfill the general approval requirements as identified in this test report o not fulfill the general approval requirements as identified in this test report Description of test item Test item : WiGig : card and WiGig Docking Station Manufacturer : Intel : Mobile Communications SAS Brand : I ntel Models : Intel® Tri-Band Wireless-AC 18260 (WiGig card) and WIDOCK-SDS (WiGig Docking Station) Serial number : --- Applicant information Applicant's representative: Mr. Steven C. Hackett Company Intel : Mobile Communications Address 100: Center Point Circle, Suite 200 Postal code SC: 29212 City Columbia : Country USA: Test(s) performed Location : Leek Test(s) started : December 24, 2015 Test(s) completed : Januarie 08, 2016 Purpose of test(s) : Original certification Test specification(s) : 47 CFR Part 15, subpart B (10-1-14 Edition) and ICES-003 (ISSUE 5, AUGUST 2012) Test engineer(s) : J.R. ter Steege Report written by : T.E.T. Koning/J.R. ter Steege Report date : January 18, 2016 This report shall not be reproduced, except in full, without the written permission of TÜV Rheinland Nederland B.V. The test results relate only to the item(s) tested. Project number : 15121601.f01 Page 3 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS Table of contents 1 General information. .............................................................................................................................................. 5 1.1 Product description. ........................................................................................................................................ 5 1.1.1 Introduction. ............................................................................................................................................ 5 1.2 Related submittal(s) and/or Grant(s). ............................................................................................................. 5 1.2.1 General. .................................................................................................................................................. 5 1.3 Tested system details. .................................................................................................................................... 5 1.3.1 Description of input/output ports ............................................................................................................. 6 1.4 Test Summary ................................................................................................................................................ 8 1.5 Test methodology. .......................................................................................................................................... 9 1.6 Test facility. .................................................................................................................................................... 9 1.7 Test conditions. .............................................................................................................................................. 9 2 System test configuration. ................................................................................................................................... 10 2.1 Justification. .................................................................................................................................................. 10 2.2 EUT mode of operation. ............................................................................................................................... 10 2.3 Special accessories. ..................................................................................................................................... 10 2.4 Equipment modifications. ............................................................................................................................. 10 2.5 Product Labelling .......................................................................................................................................... 10 2.6 Block diagram of the EUT. ........................................................................................................................... 10 2.7 Schematics of the EUT................................................................................................................................. 10 2.8 Part list of the EUT. ...................................................................................................................................... 10 3 Radiated emission data. ...................................................................................................................................... 11 3.1 System Radiated emissions data (30 MHz – 1 GHz). ................................................................................. 12 4 AC Power-line Conducted emission data. ........................................................................................................... 13 4.1.1 Testresults ............................................................................................................................................. 14 5 List of utilized test equipment. ............................................................................................................................. 17 6 Testsetup photographs ........................................................................................................................................ 18 6.1 Testsetup photographs radiated emissions ................................................................................................. 18 6.2 Testsetup photographs AC power line conducted emissions ...................................................................... 19 Project number : 15121601.f01 Page 4 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 1 General information. 1.1 Product description. 1.1.1 Introduction. The EUT is a Pheripheral Device as part of a 60 GHz WiGig Docking Service intended for docking e.g. a monitor to the laptop. The EUTs are factory configured for the 60 GHz band only. The content of this report and measurement results have not been changed other than the way of presenting the data. 1.2 Related submittal(s) and/or Grant(s). 1.2.1 General. None issued 1.3 Tested system details. Details and an overview of the system and all of its components, as it has been tested, may be found below . Test item (EUT1) : Intel Wireless-(WiGig card) Manufacturer : Intel Mobile Communication SAS Brand mark : Intel Model : Intel ® Wireless Gigabit 11000D2W Serial number : --- Remark : Wireless connected with EUT2, powered by Aux1 Test item (EUT2) : WIDOCK-SDS Manufacturer : Intel Mobile Communication SAS Brand mark : Intel Model : WIDOCK-SDS (with 13000 card) Serial number : FZWI44700009 Remark : Wireless connected with EUT2, powered by adapter Test item (AUX 1) : Ultrabook Manufacturer : Intel Mobile Communication SAS Brand mark : Intel Model : Ultrabook 2 in 1 Serial number : FZWC50200046 Remark : Host for EUT2 Test item (AUX2) : Monitor Manufacturer : HP Brand mark : HP Model : LA2405X Serial number : -- Remark : connected with EUT1 Project number : 15121601.f01 Page 5 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 1.3.1 Description of input/output ports Number Terminal From To Remarks Used for 1 Mains Mains (power supply) AUX1 powering/charging AUX1 2 Mains Mains (power supply) EUT1 -- 3 Mains Mains AUX2 -- Table 1: Interconnection between EUT and auxiliary equipment Ultrabook AUX1 Computer Monitor communicating (AUX1) with via EUT2 with (AUX 2) EUT 1 inside EUT1 EUT 2 mains mains mains Figure 1. Set-up during testing Project number : 15121601.f01 Page 6 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS EUT 1 Photographs of the EUTs. Card EUT 1 Project number : 15121601.f01 Page 7 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 1.4 Test Summary The EUT was tested in accordance with the specifications given in the table below. Test Standard 47 CFR Part 15 ICES-003 Subpart B Issue 5, Description Page Pass / Fail (10-1-14 Edition) August 2012 AC Power Line 15.107(a) Section 6.1 Table 2 12 – 15 Pass Conducted emissions 15.109(a) Section 6.2.1 Table 5 Radiated emissions 10 – 11 Pass Table : testspecifications Testmethods: ANSI C63.4-2014 Note: see end of the report for setup photographs. Project number : 15121601.f01 Page 8 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 1.5 Test methodology. The test methodology used is based on the requirements of 47 CFR Part 15, Subpart B (10-1-14 Edition), sections 15.107 and 15.109 and ICES-003 Issue 5 (august 2012) Sections 6.1 and 6.2. The test methods, which have been used, are based on ANSI C63.4-2014. Radiated emission tests above 30 MHz were performed at a measurement distance of 3 meters. To calculate the field strength level from these results to the appropriate distance at which the limit is specified, the appropriate extrapolation factor is used. The receivers are switching automatically to the right bandwidth in accordance with CISPR 16. This is implemented in the receiver. The antenna factors are programmed in the test receiver. The receiver automatically calculates the appropriate correction factor for the utilized antenna and also the appropriate antenna factor for the cable loss. The total correction is automatically added to the measured value. 1.6 Test facility. The Federal Communications Commission and Industry Canada has reviewed the technical characteristics of the test facilities at TÜV Rheinland Nederland B.V., located in Leek, 9351VT Eiberkamp 10, The Netherlands, and has found these test facilities to be in compliance with the requirements of 47 CFR Part 15, section 2.948. The description of the test facilities has been filed at the Office of the Federal Communications Commission under registration number 90828. The facility has been added to the list of laboratories performing these test services for the public on a fee basis. The description of the test facilities has been filed to Industry Canada under registration number 2932G-2. The facility has been added to the list of laboratories performing these test services for the public on a fee basis. 1.7 Test conditions. Normal test conditions: Temperature (*) : +15°C to +35°C Relative humidity(*) : 20 % to 75 % Supply voltage : Not applicable, EUT’s are self-powered Air pressure : 950 – 1050 hPa When it was impracticable to carry out the tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests are stated separately. Project number : 15121601.f01 Page 9 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 2 System test configuration. 2.1 Justification. The system was configured for testing in a typical fashion (as a customer would normally use it). The justification and manipulation of cables and equipment in order to simulate a worst-case behavior of the test setup has been carried out as prescribed in ANSI C63.4-2014. 2.2 EUT mode of operation. Testing where performed while EUT was operating in normal operating mode 2.3 Special accessories. No special accessories are used and/or needed to achieve compliance. 2.4 Equipment modifications. No modifications have been made to the equipment. No modifications have been made to the equipment in order to achieve compliance. 2.5 Product Labelling The product labeling information is available in the technical documentation package. 2.6 Block diagram of the EUT. The block diagram is available in the technical documentation package. 2.7 Schematics of the EUT. The schematics are available in the technical documentation package. 2.8 Part list of the EUT. The part list is available in the technical documentation package . Project number : 15121601.f01 Page 10 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 3 Radiated emission data. RESULT: PASS Date of testing: 2015-12-24 Frequency range: 30MHz - 1000MHz Requirements: FCC 15.109(a) and IC ICES-003 section 6.2 Except for Class A digital devices, the field strength of radiated emissions from an unintentional radiator shall not exceed the field strength levels specified in the following table: Frequency Field strength Field strength Measurement distance (MHz) (µV/m) (dBµV/m) (meters) 30-88 100 40.0 3 88-216 150 43.5 3 216-960 200 46.0 3 Above 960 500 54.0 3 Test procedure: ANSI C63.4-2014. The EUT was placed on a nonconductive turntable 0.8m above the ground plane. Before final measurements of radiated emissions were performed, the EUT was scanned to determine its emission spectrum profile. The physical arrangement of the test system, the associated cabling and the EUT orientation (X, Y, Z) were varied in order to ensure that maximum emission amplitudes were attained. The spectrum was examined from 30 MHz to 1 GHz. Final radiated emission measurements were made at 3m distance. At each frequency where a spurious emission was found, the EUT was rotated 360° and the antenna was raised and lowered from 1 to 4m in order to determine the emission’s maximum level. Measurements were taken using both horizontal and vertical antenna polarizations. The highest emission amplitudes relative to the appropriate limit were recorded in this report. Field strength values of radiated emissions at frequencies not listed in the tables are more than 20 dB below the applicable limit. Project number : 15121601.f01 Page 11 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 3.1 System Radiated emissions data (30 MHz – 1 GHz). Frequency Antenna polarization Limits Pass/Fail Measurement results Qp @3m (MHz) @3m (dBµV/m) (dBµV/m) Horizontal Vertical 146.20 31.7 << 43.5 Pass 468.96 << 36.7 46 Pass 476.48 38.7 << 46 Pass Table 1 Radiated emissions of the EUT The results of the radiated emission tests, carried out in accordance with 47 CFR Part 15 section 15.109 and ICES-003 are depicted in Table 1. The system is tested as in whole, so with all equipment as shown in Figure.1 in place and functioning. Being the worst case situation. Notes: 1. Field strength values of radiated emissions at frequencies not listed in the table above are more than 20 dB below the applicable limit. 2. Measurement uncertainty is 5.0dB 3. The reported field strength values are the worst case values at the indicated frequency. The EUT was varied in 3 positions, the antenna was varied in horizontal and vertical orientations and also in height (between 1m and 4m). 4. A Quasi-peak detector was used with a resolution bandwidth of 120 kHz. 5. The EUT was tested in in normal operation mode. Worst case values have been noted. Used test equipment and ancillaries: A00257 A00258 A00314 A00450 A00447 A00235 A00466 A00444 Project number : 15121601.f01 Page 12 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 4 AC Power-line Conducted emission data. RESULT: Pass. Date of testing: 2016-01-08 Requirements: Except when the requirements applicable to a given device state otherwise, for any license-exempt radio communication device equipped to operate from the public utility AC power supply, either directly or indirectly, the radio frequency voltage that is conducted back onto the AC power lines in the frequency range of 0.15 MHz to 30 MHz shall not exceed the limits shown in the following table. The tighter limit applies at the frequency range boundaries. Frequency of Emission Conducted Limit (dBμV) Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15 – 0.5 66 to 56* 56 to 46* 0.5 – 5 56 46 5 - 30 46 50 *Decreases with the logarithm of the frequency. Test procedure: ANSI C63.4-2013. Each phase and neutral of the AC power line were measured with respect to ground. Measurements were performed using a 50 µH / 50 Ω LISN. The frequency range from 150kHz to 30MHz was searched. The six highest EUT emissions relative to the limit were noted. The EUT is placed on a non-conductive table 0.8m above the ground plane. The EUT was positioned at least 80cm from the LISN. The power cable was routed over the non- conductive plate to the LISN. Project number : 15121601.f01 Page 13 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 4.1.1 Testresults Frequency Measurement Measurement Limits Verdict results results L1 L2/Neutral (MHz) (dBµV) (dBµV) (dBµV) (Pass/Fail) QP AV QP AV QP AV 0.154 62.0 45.6 61.4 44.7 65.8 55.5 Pass 0.189 54.0 35.4 53.1 34.4 64.1 54.0 Pass 0.204 52.2 36.7 51.7 34.6 63.4 53.6 Pass 0.290 44.4 28.6 44.7 29.1 60.5 50.5 Pass 0.591 42.4 34.4 40.4 32.6 56.0 46.0 Pass 1.345 32.3 21.5 34.6 23.8 60.0 50.0 Pass 23.810 40.0 40.5 40.0 40.3 60.0 50.0 Pass Table 2 Conducted emissions of the Aux1, including EUT1. Frequency Measurement Measurement Limits Verdict results results L1 L2/Neutral (MHz) (dBµV) (dBµV) (dBµV) (Pass/Fail) QP AV QP AV QP AV 0.195 47.6 31.5 48.5 34.7 63.82 53.82 Pass 0.239 36.9 19.7 36.4 21.2 62.13 52.13 Pass 0.470 33.4 23.5 34.2 24.1 56.51 46.51 Pass 20.800 32.7 24.2 31.8 20.4 60.00 50.00 Pass Table 3 Conducted emissions of the EUT 2 (on mains power supply The results of the conducted emission tests, carried out in accordance with 47 CFR Part 15 section 15.107(a) and ICES-003 Section 6.1 Table 2 Class B, at the 120 Volts/ 60 Hz AC mains connection terminals of the EUT, are depicted in the table above. Notes: 1. The resolution bandwidth used was 9 kHz. 2. Tested in the normal operation mode. Worst case values noted. 3. Plots are provided on the next pages. Used test equipment and ancillaries: A00022 A00171 A00437 A00441 A00314 Project number : 15121601.f01 Page 14 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS EUT 1 Conducted emissions Project number : 15121601.f01 Page 15 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS EUT 2 Conducted emissions Project number : 15121601.f01 Page 16 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 5 List of utilized test equipment. Calibration Calibration Inventory Kind of Equipment Manufacturer Model Name date due date number (mm/yyyy) (mm/yyyy) For Radiated Emissions Measurement Receiver Rohde & Schwarz ESCI A00314 03/2015 03/2016 RF Cable S-AR Gigalink APG0500 A00447 01/2015 01/2016 SCU/088/ Controller Maturo A00450 N/A N/A 8090811 Controller EMCS DOC202 A00257 N/A N/A FCC listed: 90828 Test facility Comtest A00235 04/2014 04/2017 IC: 2932G-2 Antenna mast EMCS AP-4702C A00258 N/A N/A Temperature- Humiditymeter Extech SD500 A00444 03/2015 03/2016 Biconilog Testantenna Teseq CBL 6111D A00466 06/2015 06/2016 For AC Power Line Conducted Emissions Variac RFT LSS020 A00171 NA NA LISN EMCO 3625/2 A00022 01/2014 01/2016 Measurement Receiver Rohde & Schwarz ESCI A00314 03/2015 03/2016 Shielded room for -- -- A00437 NA NA Conducted emissions Temperature- Extech SD500 A00444 03/2015 03/2016 Humiditymeter NA= Not Applicable Conformance of the used measurement and test equipment with the requirements of ISO/IEC 17025:2005 has been confirmed before testing. Project number : 15121601.f01 Page 17 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 6 Testsetup photographs 6.1 Testsetup photographs radiated emissions Photo 1. Radiated emission Project number : 15121601.f01 Page 18 of 19

Test specification(s): FCC Part 15B: 2014, ICES-003: 2012 Description of EUT: Intel® Tri-Band Wireless-AC 18260 Intel Mobile Communications SAS Manufacturer: Intel Mobile Communications SAS ` Brand mark: Intel Models: WIDOCK-SDS 6.2 Testsetup photographs AC power line conducted emissions Photo 2. Conducted emission Project number : 15121601.f01 Page 19 of 19


Document Created: 2016-01-20 16:40:30
Document Modified: 2016-01-20 16:40:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC