SRG3ACWC_Client declaration letter Rev02

FCC ID: PBR-SZG3ACWC

Cover Letter(s)

Download: PDF
FCCID_4242072

The Kroger Co.                                                                         Blue Ash, OH 45242




                                      Client Declaration Letter
Date: Jan 31, 2019                   FCC ID: PBR-SZG3ACWC

We have declared below featured for device identified as

(1) DFS Device ——          Master,                                        Client with Radar detection capability ,
                           Client without radar detection capability,     N/A

(2) Active / Passive Scanning

     Frequency                                          Active                               Passive
     Band (MHz)                                         Scan                                  Scan
     2412 - 2462                                         Yes                                  Yes
     5180 - 5240                                         Yes                                  Yes
     5260 - 5320                                         No                                    No
     5500 - 5720                                         No                                    No
     5745 - 5825                                         Yes                                  Yes

(3) Country code selection capability to end user-     Yes , No
    If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country
    selection)

(4) Meet Part 15.202 requirement - Yes ,          No ,
    * A master device is defined as a device operating in a mode in which it has the capability to transmit without
    receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending
    enabling signals to other devices
    * A client device is defined as a device operating in a mode in which the transmissions of the
    device are under control of the master. A device in client mode is not able to initiate a network.
    *
(5) For client devices that have software configuration control to operate in different modes (active scanning in
    some and passive scanning in others) in different bands (devices with multiple equipment classes or those
    that operate on non-DFS frequencies) or modular devices which configure the modes of operations
    through software, the application must provide software and operations description on how the software
    and / or hardware is implemented to ensure that proper operations modes can’t be modified by end user or
    an installer.

       Apply      No Apply
   (If apply, pls help to provide explanation on it was implement, and how software was controlled).




__________________

Name: Dion B Perkins

Position: R&D Engineering Manager

The Kroger Co.



Document Created: 2019-01-31 10:31:49
Document Modified: 2019-01-31 10:31:49

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC