User Manual

FCC ID: PAXPMVCA74

Users Manual

Download: PDF
FCCID_2934740

                    PACIFIC INDUSTRIAL CO.. LTD.
Pacific Industrial Co., Ltd.
GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN
Tel : + 81— 584 —28 — 0111 Fax : + 81 — 584— 28 — 0130


                                            Date: 2016.2.05

Federal Communications Commission
7435 Oakland Mills Road
Columbia, MD 21046

Industry Canada
3701 Carling Ave.,Bldg.94,
Ottawa,ON,K2H 8S2

Attn:    Reviewing Engineer

Re:      User Manual for PMV—CA74
         FCC ID: PAXPMVCAT74
         IC   1D: 3729A—PMVCA74

We, (Pacific Industrial Co., Ltd., Godo—cho,Anpachi—gun,Gifu—pref.,503—2397 Japan), hereby confirm that
we do not issue an instruction manual for our product PMV—CA74. This product is a tire pressure
monitoring system transmitter for vehicles, and one of the automobile parts installed in vehicles as original
equipment.

Compliance Statement (RSS210, 5.11 respectively FCC rules 15.19(a)):
"This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada.
 Operation is subject to the following two conditions: 1) This device may not cause harmful interference,
and, 2) This device must accept any interference received including interference that may cause
undesired operation."

  Ce dispositif est déclaré conforme & la Partie 15 de la Réglementation FCC et a la norme RSS—210
  d ‘Industrie Canada.
  Son fonctionnement est soumis aux deux conditions suivantes:
  (1) cet appareil ne doit pas causer d‘interférences nuisibles, et
  (2) cet appareil doit accepter les interférences regues, y compris celles
  susceptibles de causer un fonctionnement indésirable.

"CAUTION TO USER: Changes or modifications made to this equipment not expressly approved by
Pacific Industrial Co., Ltd. could void the user‘s authority to operate the equipment.

Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.


Because our PMV—CA74 is too small to place above compliance statement on it and because we do not
issue any users manual for our PMV—CA74, we hereby confirm that we will inform the car manufacturer
that the compliance statement must be included in the user‘s manual of the car.

Yours Sincerely



Kunitaka Yano
                               Kimiléha
Assistant Manager
Engineering Department
Pacific Industrial Co., Ltd.
Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan
E—Mail: knyano@pacific—ind.co.jp


                   PACIFIC INDUSTRIAL CO. LTD.
Pacific Industrial Co., Ltd.
GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN
Tel : + 81— 584 — 28 — 0111 Fax : + 81 — 584— 28 — 0130




                                              Date: 2016.2.05

TO:     NISSAN MOTOR CO.,LTD.
        1—1,Morinosatoacyama, Atsugi—shi kanagawa 243—0123, JAPAN



Dear Sirs

Our product PMV—CA74 (IC: 3729A— PMVCAT74) is a tire pressure monitoring system transmitter for
vehicle usage. Since this product will be already installed in cars (as original equipment) when placed
into the U.S. market, we must hereby request that the following caution statement per CFR 47, Part 15,
Paragraph 15.21 will be added to the car manual.

The title "CAUTION TO USER" or "FCC WARNING:" "NOTE:" or relevant title and " Changes or
modifications made to this equipment not expressly approved by Pacific Industrial Co., Ltd. could void the
user‘s authority to operate the equipment."

Per RSS210, Paragraph 5.11 and CFR 47, Part 15, Paragraph 15.19(a) (3) the following statement must
be added to the car manual:

 "This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada. Operation is
subject to the following two conditions: 1) This device may not cause harmful interference, and, 2) This
device must accept any interference received including interference that may cause undesired operation."

  Ce dispositif est déclaré conforme a la Partie 15 de la Réglementation FCC et a la norme RSS—210
  d‘Industrie Canada.
  Son fonctionnement est soumis aux deux conditions suivantes:
  (1) cet appareil ne doit pas causer d‘interférences nuisibles, et
  (2) cet appareil doit accepter les interférences reques, y compris celles
  susceptibles de causer un fonctionnement indésirable.

Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.


Yours Sincerely




Kunitaka Yano
                                  Kumilaks
Assistant Manager
Engineering Department
Pacific Industrial Co., Ltd.
Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan
E—Mail: knyano @pacific—ind.co.jp



Document Created: 2016-02-08 03:02:39
Document Modified: 2016-02-08 03:02:39

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC