Manual Letter

FCC ID: PAXPMVC814

Users Manual

Download: PDF
FCCID_3230733

PACIFIC INDUSTRIAL CO. LTD. Pacific Industrial Co., Ltd. GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN Tel : + 81— 584 —28 — 0111 Fax : + 81 — 584— 28— 0130 Date: 2016.11.25 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Industry Canada 3701 Carling Ave.,Bldg.94, Ottawa,ON,K2H 8S2 Attn: Reviewing Engineer Re: User Manual for PMV—C814 FCC ID: PAXPMVC814 IC ID: 3729A—PMVC814 We, (Pacific Industrial Co., Ltd., Godo—cho, Anpachi—gun,Gifu—pref.,503—2397 Japan), hereby confirm that we do not issue an instruction manual for our product PMV—C814. This product is a tire pressure monitoring system transmitter for vehicles, and one of the automobile parts installed in vehicles as original equipment. Compliance Statement (RSS210, 5.11 respectively FCC rules 15.19(a)): "This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and, 2) This device must accept any interference received including interference that may cause undesired operation." Ce dispositif est déclaré conforme a la Partie 15 de la Réglementation FCC et a la norme RSS—210 d‘Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d‘interférences nuisibles, et (2) cet appareil doit accepter les interférences regues, y compris celles susceptibles de causer un fonctionnement indésirable. "CAUTION TO USER: Changes or modifications made to this equipment not expressly approved by Pacific Industrial Co., Ltd. could void the user‘s authority to operate the equipment. Radiofrequency radiation exposure Information: The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. Because our PMV—C814 is too small to place above compliance statement on it and because we do not issue any users manual for our PMV—C876, we hereby confirm that we will inform the car manufacturer that the compliance statement must be included in the user‘s manual of the car. Yours Sincerely . Wa— Kunitaka Yano Assistant Manager Engineering Department Pacific Industrial Co., Ltd. Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan E—Mail: knyano@pacific—ind.co.jp

PACIFIC INDUSTRIAL CO. LTD. Pacific industrial Co., Ltd. GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN Tel : + 81— 584 —28 — 0111 Fax : + 81 — 584— 28 — 0130 Date: 2016.11.25 TO: NISSAN MOTOR CO.,LTD. 1—1,Morinosatoaoyama, Atsugi—shi kanagawa 243—0123, JAPAN Dear Sirs Our product PMV—C814 (IC: 3729A— PMVC814) is a tire pressure monitoring system transmitter for vehicle usage. Since this product will be already installed in cars (as original equipment) when placed into the U.S. market, we must hereby request that the following caution statement per CFR 47, Part 15, Paragraph 15.21 will be added to the car manual. The title "CAUTION TO USER" or "FCC WARNING:" "NOTE:" or relevant title and " Changes or modifications made to this equipment not expressly approved by Pacific Industrial Co., Ltd. could void the user‘s authority to operate the equipment." Per RSS210, Paragraph 5.11 and CFR 47, Part 15, Paragraph 15.19(a) (3) the following statement must be added to the car manual: "This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and, 2) This device must accept any interference received including interference that may cause undesired operation." Ce dispositif est déclaré conforme a la Partie 15 de la Réglementation FCC et a la norme RSS—210 d‘Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d‘interférences nuisibles, et (2) cet appareil doit accepter les interférences regues, y compris celles susceptibles de causer un fonctionnement indésirable. Radiofrequency radiation exposure Information: The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. Yours Sincerely Ma oMAZ Kunitaka Yano Assistant Manager Engineering Department Pacific Industrial Co., Ltd. Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan E—Mail: knyano @pacific—ind.co.jp


Document Created: 2016-11-25 13:39:33
Document Modified: 2016-11-25 13:39:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC