User Manual Letter

FCC ID: PAXPMVC11A

Users Manual

Download: PDF
FCCID_3282670

                    PACIFIC INDUSTRIAL CO. LTD.
Pacific Industrial Co., Ltd.
GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN
Tel : + 81— 584 —28 —0111 Fax : + 81 — 584— 28 — 0130



                                            Date: 2017.2.13

Federal Communications Commission
7435 Oakland Mills Road
Columbia, MD 21046

Industry Canada
3701 Carling Ave.,Bldg.94,
Ottawa, ON,K2H 8S2

Attn:    Reviewing Engineer

Re:      User Manual for PMV—C11A
         FCC ID: PAXPMVC11A
         IC ID: 3729A—PMVC11A

We, (Pacific Industrial Co., Ltd., Godo—cho,Anpachi—gun,Gifu—pref.,503—2397 Japan), hereby confirm that
we do not issue an instruction manual for our product PMV—C11A. This product is a tire pressure
monitoring system transmitter for vehicles, and one of the automobile parts installed in vehicles as original
equipment.

Compliance Statement (RSS210, 5.11 respectively FCC rules 15.19(a)):
"This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada.
 Operation is subject to the following two conditions: 1) This device may not cause harmful interference,
and, 2) This device must accept any interference received including interference that may cause
undesired operation."

  Ce dispositif est déclaré conforme a la Partie 15 de la Réglementation FCC et & la norme RSS—210
  d‘Industrie Canada.
  Son fonctionnement est soumis aux deux conditions suivantes:
  (1) cet appareil ne doit pas causer d‘interférences nuisibles, et
  (2) cet appareil doit accepter les interférences regues, y compris celles
  susceptibles de causer un fonctionnement indésirable.

"CAUTION TO USER: Changes or modifications made to this equipment not expressly approved by
Pacific Industrial Co., Ltd. could void the user‘s authority to operate the equipment.

Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.


Because our PMV—C11A is too small to place above compliance statement on it and because we do not
issue any users manual for our PMV—C11A, we hereby confirm that we will inform the car manufacturer
that the compliance statement must be included in the user‘s manual of the car.

Yours Sincerely



Kunitaka Yano
                               Kamiloh
Assistant Manager
Engineering Department
Pacific Industrial Co., Ltd.
Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan
E—Mail: knyano@pacific—ind.co.jp


                        PACIFIC INDUSTRIAL CO.,. LTD.
    Pacific Industrial Co., Ltd.
    GODO—CHO, ANPACHI, GIFU, 503—2397 JAPAN
    Tel : + 81— 584 — 28 — 0111 Fax : + 81 — 584 —28 —0130 —




                                                 Date: 2017.2.13

    TO:      Toyota Motor Company
             1, Toyota—cho, Toyota—city, AICHI—pref., 471—8572, JAPAN


    Dear Sirs

    Our product PMV—C11A (IC: 3729A— PMVC11A) is a tire pressure monitoring system transmitter for
    vehicle usage. Since this product will be already installed in cars (as original equipment) when placed
    into the U.S. market, we must hereby request that the following caution statement per CFR 47, Part 15,
    Paragraph 15.21 will be added to the car manual.

    The title "CAUTION TO USER" or "FCC WARNING:" "NOTE:" or relevant title and " Changes or
    modifications made to this equipment not expressly approved by Pacific Industrial Co., Ltd. could void the
    user‘s authority to operate the equipment."

    Per RSS210, Paragraph 5.11 and CFR 46, Part 15, Paragraph 15.19(a) (3) the following statement must
    be added to the car manual:

     "This device complies with Part 15 of the FCC Rules and with RSS—210 of Industry Canada. Operation is
    subject to the following two conditions: 1) This device may not cause harmful interference, and, 2) This
    device must accept any interference received including interference that may cause undesired operation."

      Ce dispositif est déclaré conforme & la Partie 15 de la Réglementation FCC et & la norme RSS—210
      d‘Industrie Canada.
      Son fonctionnement est soumis aux deux conditions suivantes:
      (1) cet appareil ne doit pas causer d‘interférences nuisibles, et
      (2) cet appareil doit accepter les interférences regues, y compris celles
      susceptibles de causer un fonctionnement indésirable.

    Radiofrequency radiation exposure Information:
    The radiated output power of the device is far below the FCC radio frequency exposure limits.
    Nevertheless, the device shall be used in such a manner that the potential for human contact during
    normal operation is minimized.


    Yours Sincerely

.                                   1
                   '                        N
    Kunitaka Yano
    Assistant Manager
    Engineering Department
    Pacific Industrial Co., Ltd.
    Godo—cho, Anpachi—gun, GIFU—pref. 503—2397 Japan
    E—Mail: knyano@pacific—ind.co.jp



Document Created: 2017-02-13 16:42:02
Document Modified: 2017-02-13 16:42:02

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC