PANCM8822CU

FCC ID

Equipment: ac2x2+BT5.0 USB2.0 module

CC&C; Technologies, Inc. CM8822CU

8F, No. 150, Jian Yi Road, Zhonghe District,, New Taipei City, N/A 235 Taiwan

Application
Frequency Range
Final Action Date
Granted
Ad0G0sruISIxMgVNd6fI3w==
5180.0-5240.0
2019-07-11
APPROVED
Ad0G0sruISIxMgVNd6fI3w==
5745.0-5825.0
2019-07-11
APPROVED
jYh97+lC/XtHc6LHbBliEA==
2402.0-2480.0
2019-07-11
APPROVED
jYh97+lC/XtHc6LHbBliEA==
2412.0-2462.0
2019-07-11
APPROVED
U4x4NmBPUavpnfIuaB0kvw==
2402.0-2480.0
2019-07-11
APPROVED
File NameDocument TypeDateDirect
RF ExposureRF Exposure Info 2019-07-11 00:00:00 pdf
Label Artwork and LocationID Label/Location Info 2019-07-11 00:00:00 pdf
Internal PhotosInternal Photos 2019-07-11 00:00:00 pdf
External PhotosExternal Photos 2019-07-11 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-07-11 00:00:00 pdf
Test ReportTest Report 2019-07-11 00:00:00 pdf
User ManualUsers Manual 2019-07-11 00:00:00 pdf
Modular Approval JustificationCover Letter(s) 2019-07-11 00:00:00 pdf
Confidentiality RequestCover Letter(s) 2019-07-11 00:00:00 pdf
Letter of AgencyCover Letter(s) 2019-07-11 00:00:00 pdf
Block DiagramBlock Diagram N/A
Parts ListParts List/Tune Up Info N/A
Schematic DiagramSchematics N/A
Technical DescriptionOperational Description N/A
Circuit DiagramSchematics N/A

Application Details:

Equipmentac2x2+BT5.0 USB2.0 module
FRN0017995770
Grantee CodePAN
Product CodeCM8822CU
Applicant BusinessCC&C; Technologies, Inc.
Business Address8F, No. 150, Jian Yi Road, Zhonghe District, , New Taipei City,N/A Taiwan 235
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJoyce Huang – President
Applicant Phone
Applicant Fax+886-2-8226-5077
Applicant Email[email protected]
Applicant MailStop
Test FirmAttestation of Global Compliance (Shenzhen) Co., L
Test Firm ContactDoris Li
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByJoyce Huang – President
Comment [Ad0G0sruISIxMgVNd6fI3w==]: Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The device has 20MHz, 40MHz and 80MHz bandwidth modes.
Comment [jYh97+lC/XtHc6LHbBliEA==]: Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. 2.4GHz WLAN of the device has 20MHz and 40MHz bandwidth modes.
Comment [U4x4NmBPUavpnfIuaB0kvw==]: Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC