ATCB comments

FCC ID: PANBT0330

Cover Letter(s)

Download: PDF
FCCID_459629

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 August 9, 2004 RE: FCC ID: PANBT0330_ATCB001569 Attention: Ellis Wu / Stephanie Hung I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that the manual states that this device is to have a 20 cm separation distance. Please note that as this is a USB dongle, this is not possible. Also, as the power of this device is 2mw or less, a separation distance is not required. Please correct the manual by removing the separation distance statement and providing a proper rf exposure statement (i.e. the only statement necessary for this device is the first statement; the 20 cm statement and the no collocation statement are not required for this device). 2. Please note that from the internal photos it appears that modifications and/or ‘EMI fixes’ have been made to the device for compliance reasons. Please verify that the copper shielding apparently installed during testing will be implemented in the final product. If the copper shielding is part of the original deice, please verify this and please verify that this will be implemented in the final product. Dennis Ward mailto:dward@AmericanTCB.com The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.


Document Created: 2004-08-09 08:15:43
Document Modified: 2004-08-09 08:15:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC