RF Exposure

FCC ID: PAGTR-026S

RF Exposure Info

Download: PDF

FCCID_3744224

Reference No.: WTD18S0199520-2E

FCC ID: PAGTR-026S RF Exposure Report
Test Requirement: FCC Part 1.1307
Evaluation Method: FCC Part2.1093 & 447498 D01 General RF Exposure Guidance v06

Requirements

1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation
distances ≤50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,
mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR where

1. f(GHz) is the RF channel transmit frequency in GHz
2. Power and distance are rounded to the nearest mW and mm before calculation
3. The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and
for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

The procedures / limit

Source-based Source-based Minimum test SAR Test
SAR Test
time-averaged time-averaged separation Exclusion
Exclusion
maximum maximum distance required Thresholds Result
Thresholds
output output for the exposure Calculation
Limit
power(dBm) power(mW) conditions(mm) Value
-8.87 0.13 5 0.017 3.0 Compliance
Test Chanel: f=433.92MHz=0.43392GHz, so √f(GHz)=0.659
Note: the following is Source-based time-averaged maximum output power Calculation
Source-based
Source-based time-
Substituted time-averaged
Frequency averaged maximum
(0dBm) maximum output
output power
power
(MHz) (dBμV/m) (dBμV/m) (dBm)

433.92 86.33 95.20 -8.87

Result: Compliance
No SAR measurement is required.

Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn

Document Created: 2018-02-06 14:56:21
Document Modified: 2018-02-06 14:56:21

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC