Test Report

FCC ID: PAGTR-020S

Test Report

Download: PDF
FCCID_2982199

TEST REPORT Reference No. .................... : WTD16S0447623E FCC ID ................................ : PAGTR-020S Applicant ............................ : KAB Enterprise CO., Ltd. Address .............................. : 21F, -1, No.33, Sec. 1, Minsheng Rd., Banqiao Dist., New Taipei City 220, Taiwan (R.O.C) Manufacturer .................... : Verdant Electronics(Dong Guan) Co., Ltd. Address .............................. : Langxie Administrative District, Qiaotou, Dongguan City, Guang Dong Sheng, China. Product Name .................... : Remote Controller Model No. ........................... : TR-020S Standards........................... : FCC CFR47 Part 15 Section 15.231: 2015 Date of Receipt sample .... : Apr. 13, 2016 Date of Test ....................... : Apr. 13 – 15, 2016 Date of Issue ...................... : Apr. 25, 2016 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Lake Xie / Test Engineer Philo Zhong / Manager Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 23

Reference No.: WTD16S0447623E Page 2 of 23 2 Test Summary Test Items Test Requirement Result Conducted Emissions 15.207 N/A 15.205(a) Radiated Spurious Emissions 15.209 PASS 15.231(a) Periodic Operation 15.231(a) PASS 20dB Bandwidth 15.231(c) PASS Antenna Requirement 15.203 PASS Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 3 of 23 3 Contents Page 1 COVER PAGE ...................................................................................................................................... 1 2 TEST SUMMARY ............................................................................................................................................. 2 3 CONTENTS ....................................................................................................................................................... 3 4 GENERAL INFORMATION ............................................................................................................................. 4 4.1 GENERAL DESCRIPTION OF E.U.T........................................................................................................ 4 4.2 DETAILS OF E.U.T. ................................................................................................................................ 4 4.3 TEST FACILITY ....................................................................................................................................... 4 5 EQUIPMENT USED DURING TEST ............................................................................................................. 5 5.1 EQUIPMENTS LIST ................................................................................................................................. 5 5.2 MEASUREMENT UNCERTAINTY.............................................................................................................. 5 5.3 TEST EQUIPMENT CALIBRATION ........................................................................................................... 5 6 CONDUCTED EMISSION ............................................................................................................................... 6 7 RADIATED SPURIOUS EMISSIONS ............................................................................................................ 7 7.1 EUT OPERATION ................................................................................................................................... 7 7.2 TEST SETUP .......................................................................................................................................... 8 7.3 SPECTRUM ANALYZER SETUP .............................................................................................................. 9 7.4 TEST PROCEDURE ............................................................................................................................... 10 7.5 SUMMARY OF TEST RESULTS ............................................................................................................. 11 8 PERIODIC OPERATION ............................................................................................................................... 12 9 20DB BANDWIDTH ....................................................................................................................................... 15 9.1 TEST PROCEDURE ............................................................................................................................... 15 9.2 TEST RESULT ...................................................................................................................................... 15 10 ANTENNA REQUIREMENT ......................................................................................................................... 16 11 PHOTOGRAPHS- MODEL TR-009S TEST SETUP ................................................................................. 17 11.1 RADIATION EMISSION TEST SETUP ..................................................................................................... 17 12 PHOTOGRAPHS - CONSTRUCTIONAL DETAILS ................................................................................. 19 12.1 MODEL TR - 020S - APPEARANCE VIEW ............................................................................................ 19 12.2 MODEL TR-020S - INTERNAL VIEW .................................................................................................... 22 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 4 of 23 4 General Information 4.1 General Description of E.U.T. Product Name : Remote Controller Model No. : TR-020S Model Difference : N/A Type of Modulation : ASK Frequency Range : 315.0MHz The Lowest Oscillator : 315.0MHz Antenna installation : Integrated Antenna 4.2 Details of E.U.T. Technical Data : DC 12V by battery 4.3 Test Facility The test facility has a test site registered with the following organizations:  IC – Registration No.: 7760A-1 Waltek Services (Shenzhen) Co., Ltd. has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration 7760A-1, July 12, 2012.  FCC Test Site 1#– Registration No.: 880581 Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory `has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 880581, April 29, 2014.  FCC Test Site 2#– Registration No.: 328995 Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory `has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 328995, December 3, 2014. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 5 of 23 5 Equipment Used during Test 5.1 Equipments List 3m Semi-anechoic Chamber for Radiated Spurious Emissions Last Calibration Item Equipment Manufacturer Model No. Serial No. Calibration Due Date Date 1 EMC Analyzer Agilent E7405A MY45114943 Sep.14,2015 Sep.13,2016 2 Active Loop Antenna Beijing Dazhi ZN30900A - Sep.14,2015 Sep.13,2016 Trilog Broadband 3 SCHWARZBECK VULB9163 336 Apr.19,2016 Apr.18,2017 Antenna Coaxial Cable 4 Top TYPE16(13M) - Sep.14,2015 Sep.13,2016 (below 1GHz) Broad-band Horn 5 SCHWARZBECK BBHA 9120 D 667 Sep.14,2015 Sep.13,2016 Antenna Broad-band Horn 6 SCHWARZBECK BBHA 9170 335 Sep.14,2015 Sep.13,2016 Antenna Broadband COMPLIANCE 7 PAP-1G18 2004 Sep.14,2015 Sep.13,2016 Preamplifier DIRECTION Coaxial Cable 8 Top 1GHz-25GHz EW02014-7 Sep.14,2015 Sep.13,2016 (above 1GHz) 5.2 Measurement Uncertainty Test Item Frequency Range Uncertainty Note Conducted Emissions 150kHz~30MHz 3.64dB (1) Radiated Spurious 30MHz~1000MHz 5.03dB (1) Emissions 1000M~5000MHz ± 5.47 dB (1) (1)This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. 5.3 Test Equipment Calibration All the test equipments used are valid and calibrated by CEPREI Certification Body that address is No.110 Dongguan Zhuang RD. Guangzhou, P.R.China. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 6 of 23 6 Conducted Emission Test Requirement: FCC CFR 47 Part 15 Section 15.207 Test Method: ANSI C63.4:2014 Test Result: N/A Remark The device is powered by battery, it is not application for this test. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 7 of 23 7 Radiated Spurious Emissions Test Requirement: FCC Part15 Paragraph 15.231(a) Test Method: ANSI C63.4:2014 Test Result: PASS Measurement Distance: 3m Limit: Field Strength Field Strength Fundamental Field Strength Field Strength of Spurious of Spurious Frequency of Fundamental of Fundamental Emission Emission (MHz) (uV/m) (dBuV/m) (uV/m) (dBuV/m) 44.66-40.70 2250 67 225 47 70-130 1250 62 125 42 130-174 1250 to 3750 62 to 71.48 125 to 375 42 to 51.48 174-260 3750 71.48 375 51.48 260-470 3750 to 12500 71.48 to 81.94 375 to 1250 51.48 to 61.94 Above 470 12500 81.94 1250 61.94 ** linear interpolations 7.1 EUT Operation Operating Environment : Temperature: 23.5 C Humidity: 51.1 % RH Atmospheric Pressure: 101.2kPa EUT Operation : The test was performed in transmitting mode, the test data were shown in the report. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 8 of 23 7.2 Test Setup The radiated emission tests were performed in the 3m Semi- Anechoic Chamber test site, using the setup accordance with the ANSI C63.4: 2014. The test setup for emission measurement below 30MHz. Semi-anechoic 3m Chamber Turn Table From 0°to 360° 3m EUT Turn Table 0.8m PC Spectrum AMP Combining System Analyzer Network The test setup for emission measurement from 30 MHz to 1 GHz. Semi-anechoic 3m Chamber Antenna Elevation Varies From 1 to 4 m Turn Table From 0°to 360° 3m EUT 0.8m Turn Table PC Spectrum AMP Combining System Analyzer Network Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 9 of 23 The test setup for emission measurement above 1 GHz. Anechoic 3m Chamber Antenna Elevation Varies From 1 to 4 m Turn Table From 0°to 360° 3m EUT 0.8m Turn Table Absorbers PC Spectrum AMP Combining System Analyzer Network 7.3 Spectrum Analyzer Setup Below 30MHz Sweep Speed .............................................. Auto IF Bandwidth ................................................ 10kHz Video Bandwidth.......................................... 10kHz Resolution Bandwidth.................................. 10kHz 30MHz ~ 1GHz Sweep Speed .............................................. Auto Detector ..................................................... PK Resolution Bandwidth .................................. 100kHz Video Bandwidth.......................................... 300kHz Above 1GHz Sweep Speed .............................................. Auto Detector ..................................................... PK Resolution Bandwidth .................................. 1MHz Video Bandwidth.......................................... 3MHz Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 10 of 23 7.4 Test Procedure 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level. 3. EUT is set 3m away from the receiving antenna, which is moved from 1m to 4m to find out the maximum emissions. The spectrum was investigated from the lowest radio frequency signal generated in the device, without going below 9 kHz, up to the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. 4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 5. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 6. Repeat above procedures until the measurements for all frequencies are complete. 7. The radiation measurements are tested under 3-axes(X, Y, Z) position(X denotes lying on the table, Y denotes side stand and Z denotes vertical stand). After pre-test, It was found that the worse radiation emission was get at the X position. So the data shown was the X position only. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 11 of 23 7.5 Summary of Test Results AV = Peak +20Log10(duty cycle) Test Frequency: Below 30MHz The measurements were more than 20 dB below the limit and not reported. Test Frequency: 30MHz ~ 5GHz FCC Part Receive Turn RX Antenna Frequen Detect Corrected Corrected 15.231/209/205 r table cy or Factor Amplitude Reading Angle Height Polar Limit Margin (PK/Q (MHz) (dBμV) Degree (m) (H/V) (dB/m) (dBμV/m) (dBμV/m) (dB) P/Ave) 315.00 77.59 PK 296 1.2 H -7.31 70.38 95.62 -25.24 315.00 84.66 PK 234 1.0 V -7.31 74.26 95.62 -21.36 630.00 60.17 PK 21 1.5 H 0.04 57.36 75.62 -18.26 630.00 66.07 PK 162 1.7 V 0.04 56.24 75.62 -19.38 945.00 55.89 PK 259 1.5 H -16.38 39.39 75.62 -36.23 945.00 53.35 PK 197 1.9 V -16.38 37.70 75.62 -37.92 2725.20 54.26 PK 191 1.1 H -14.87 39.53 74.00 -34.47 2725.20 57.23 PK 105 1.6 V -14.87 42.30 74.00 -31.70 FCC Part Turn RX Antenna Duty 15.231/209/205 Frequency PK table cycle AV Angle Height Polar Factor Limit Margin (MHz) (dBμV/m) Degree (m) (H/V) (dB) (dBμV/m) (dBμV/m) (dB) 315.00 70.38 317 1.2 H -6.09 64.29 75.62 -11.33 315.00 74.26 147 1.0 V -6.09 68.17 75.62 -7.45 630.00 57.36 71 1.5 H -6.09 51.27 55.62 -4.35 630.00 56.24 76 1.7 V -6.09 50.15 55.62 -5.47 945.00 39.39 79 1.5 H -6.09 33.30 55.62 -22.32 945.00 37.70 316 1.9 V -6.09 31.61 55.62 -24.01 2725.20 39.53 325 1.1 H -6.09 33.44 54.00 -20.56 2725.20 42.30 159 1.6 V -6.09 36.21 54.00 -17.79 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 12 of 23 8 Periodic Operation The duty cycle was determined by the following equation: To calculate the actual field intensity, The duty cycle correction factor in decibel is needed for later use and can be obtained from following conversion Duty Cycle(%)=Total On interval in a complete pulse train/ Length of a complete pulse train *100 % Duty Cycle Correction Factor(dB)=20 * Log10(Duty Cycle(%)) Total transmission time(ms) 19.6+4*12.8=70.8 Length of a complete transmission period(ms) 142.8 Duty Cycle(%) 49.58 Duty Cycle Correction Factor(dB) -6.09 Refer to the duty cycle plot (as below),This device meets the FCC requirement. Length of a complete pulse train: Remark: FCC part15.35(c) required that a complete pulse train is more than 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. Tp Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 13 of 23 Pulse 1 Pulse 2 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 14 of 23 FCC Part15.231(a)(1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. (2)A transmitter activated automatically shall cease transmission within 5 seconds after activation. (3) Periodic transmissions at regular predetermined intervals are not permitted. However, polling or supervisiontransmissions, including data, to determine system integrity of transmitters used in security or safety applications areallowed if the total duration of transmissions does not exceed more than two seconds per hour for each transmitter.There is no limit on the number of individual transmissions, provided the total transmission time does not exceed twoseconds per hour. (4) Intentional radiators which are employed for radio control purposes during emergencies involving fire, security, andsafety of life, when activated to signal an alarm, may operate during the pendency of the alarm condition (5) Transmission of set-up information for security systems may exceed the transmission duration limits in paragraphs(a)(1) and (a)(2) of this section, provided such transmissions are under the control of a professional installer and do notexceed ten seconds after a manually operated switch is released or a transmitter is activated automatically. Such set-upinformation may include data. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 15 of 23 9 20dB Bandwidth Test Requirement: FCC Part15.231(c) Test Method: FCC Part15.231(c) Limit The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5% of the center frequency. 9.1 Test Procedure 1. The transmitter output (antenna port) was connected to the spectrum analyzer.EUT and its simulators are placed on a table, let EUT working in test mode, then test it. 2. The bandwidth of the fundamental frequency was measure by spectrum analyser with 3kHz RBW and 10kHz VBW.The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power 20dB. 9.2 Test Result Bandwidth Frequency Limit Emission Result (MHz) (kHz) (kHz) 315 49.90 787.65 Pass Limit=Center Frequency*0.25% Test Plot Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 16 of 23 10 Antenna Requirement According to the FCC Part 15 Paragraph 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna to the intentional radiator shall be considered sufficient to comply with the provisions of this section. This product use a permanent integrated antenna, fulfill the requirement of this section. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 17 of 23 11 Photographs- Model TR-020S Test Setup 11.1 Radiation Emission Test Setup Below 30MHz Test site 2# From 30MHz to 1GHz Test site 2# Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 18 of 23 Above 1GHz Test site 1# Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 19 of 23 12 Photographs - Constructional Details 12.1 Model TR-020S - Appearance View Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 20 of 23 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 21 of 23 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 22 of 23 12.2 Model TR-020S - Internal View Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

Reference No.: WTD16S0447623E Page 23 of 23 Ant ======End of Report====== Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn


Document Created: 2017-12-04 13:34:05
Document Modified: 2017-12-04 13:34:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC