Users Manual

FCC ID: PAGTR-016N

Users Manual

Download: PDF
FCCID_2914687

Size: W-297xH-210/mm RC-018+TR-016N Indoor Wireless Remote Control To Use 1. To set up the receiver (outlet) with connecting device. IMPORTANT SAFEGUARDS 2. Removes the plastic battery tab from the battery compartment in the back of the remote control to active the DC 12V Type A23 pre-installed battery. 3. Press "Clear" ON button on the transmitter to turn the "Clear" receiver ON and press OFF button on the transmitter to turn the Signal Word Definitions receiver OFF. NOTE: These are general definitions only; all may not pertain to the actual product purchased. 4. Press "Multi" ON button on the transmitter to turn the "Multi" receiver ON and press OFF button on the transmitter to turn the receiver OFF. DANGER – Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Usage of 5. Press "Both" ON button on the transmitter to turn the"Clear" and "Multi" receiver ON and press OFF button on the transmitter this signal word is limited to the most extreme situations. to turn the receiver OFF. WARNING – Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION – Indicates a potentially hazardous situation, which, if not avoided, may result in minor/moderate injury or Battery Handling and Usage product/property damage. It also alerts against unsafe practices. WARNING: Keep batteries away from children and pets. • Follow the battery manufacturer’s safety and usage instructions. When using electrical products, always follow basic safety precautions including the following: • Insert the battery observing the proper polarity (+/−) as indicated inside the Battery Compartment. CAUTION: Failure to properly align the battery polarity can cause personal injury and/or property damage. • Remove a spent or discharged battery from the product. Remove the battery when not using the product for an extended period. READ ALL INSTRUCTIONS BEFORE USE. • Never throw batteries into a fire. Do not expose batteries to fire or other heat sources. • Battery contains mercury. Do not put in trash. Recycle or manage as hazardous waste. Battery Replacement: WARNING-- To reduce the risk of fire, electric shock, or serious personal injury: Clear Both Multi On On On 1. Remove the Battery compartment cover from the back of the Do not immerse the product in water or other liquids. remote control by sliding the cover in the direction that its treads curve. Clear Both Multi This product is not intended for use by children and contains small parts that may pose a choking hazard to children under Off Off Off 2. Remove the spent battery and place a new DC 12V Type 23A battery into the age of three. Keep the product out of the reach of children and pets. the battery compartment, correctly observing the polarity indications Do not use an electrical device or appliance with this product whose electrical specifications exceed those specified in the (+/−) inside the battery compartment. “Electrical Specifications” section of this manual. 3. Replace the battery compartment cover. CAUTION-- To reduce the risk of personal injury or product/property damage: This product is intended for non-commercial, non-industrial use in the remote control of two electrical outlets. Do not use this product for any other purpose. Set Up 1. Plug the receiver into a standard 125-volt AC electrical outlet. 2. Confirm that the electrical specifications of an item you wish to use with this product do not exceed those specified in the Federal Communications Commission Interference Statement "Electrical Ratings" section. Plug the item into an outlet of the receiver. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC 3. Remove the plastic battery tab from the battery compartment in the back of the remote control to activate the DC 12V Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Type A23 pre-installed battery. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. RECEIVER MODEL: RC-018 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. TRANSMITTTER MODEL: TR-016N • Consult the dealer or an experienced radio/TV technician for help. FCC ID: PAGTR-016N Clear Multi Cle ar This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Mu (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including ELECTRICAL RATINGS lti interference that may cause undesired operation of the device. Range Up to 50ft. 125Vac 60Hz 15 A General Purpose FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the 125Vac 60Hz 15 A Resistive user's authority to operate this equipment. 1,000 W Tungsten 500 VA Electronic Ballast 120Vac 60Hz 8.3A Ballast. 1/2 HP Made in China


Document Created: 2016-02-01 10:09:35
Document Modified: 2016-02-01 10:09:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC