Test report below 1 GHz

FCC ID: PADWF126

Test Report

Download: PDF
FCCID_3921723

Shenzhen GTI Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel : +86—755—27521059 Fax: +86—755—27521011 TEST REPORT Product Name .......................... : KICKR HEADWIND Trademark .....................l2222kkk2, : N.A. Model/Type reference .............. : WF126US Listed Model(s) ........................ : N.A. 7&o | » ooo e : PADWF126 FCC Part 15.249; Operation within the bands 902—928 Test Standards ......................... 7 MHz, 2400—2483.5 MHz and 5725—5850 MHz Report No GTI20180934F—2 ApPPIICANT .. .. ... .. .2 c000enerre e rrkakkkss : Wahoo Fitness L.L.C. Address of applicant ............... : 90 W WIEUCA RD NE STE 110 ATLANTA GA 30342 Date of Receipt ........................ : Jun. 01, 2018 Date of Test Date...................... : —Jun. 05, 2018 to Jun. 15, 2018 Data of issue. ........................22. : Jun. 21, 2018 Test result Pass * * In the configuration tested, the EUT complied with the standards specified above Shenzhen General Testing & Inspection Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel.: (86)755—27521059 Fax.: (86)755—27521011 Http:/www.sz—ctc.org.cn Emc EEEe eiluston and Aocediaton Aseurs hn Aelinertiiae e m For anti—fake verification, please visit the official website of Certification and Accreditation Administration of the People‘s Republic of China : yz.cncaic.cn

Page 2 of 23 Report No.: GTI20180934F-2 GENERAL DESCRIPTION OF EUT Equipment: KICKR HEADWIND Model Name: WF126US Adding Model(s): N.A. Model difference: N.A. Manufacturer: Wahoo Fitness L.L.C. Manufacturer Address: 90 W WIEUCA RD NE STE 110 ATLANTA GA 30342 Factory: East West Industries Vietnam LLC NO.27,Street No.2,VSIP 2,Hoa Phu Ward,Thu Dau Mot Address: City,Binh Duong Province,Vietnam 84,Viet Nam Power Rating: 100-120V 50-60Hz 1.3A 65W Compiled By: : (Torny Fang) Reviewed By: : (Cary Luo) $英文检测章$ Approved By: : $Walter$ (Walter Chen) This test report may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by GTI. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to GTI within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 3 of 23 Report No.: GTI20180934F-2 Table of Contents Page 1. SUMMARY................................................................................................................................................................ 4 1.1. TEST STANDARDS.......................................................................................................................................................... 4 1.2. TEST DESCRIPTION........................................................................................................................................................ 4 1.3. TEST FACILITY .............................................................................................................................................................. 5 1.4. MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2. GENERAL INFORMATION .......................................................................................................................................... 6 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3. DESCRIPTION OF TEST MODES ........................................................................................................................................ 7 2.4. MEASUREMENT INSTRUMENTS LIST ................................................................................................................................. 8 4. TEST CONDITIONS AND RESULTS .............................................................................................................................. 9 4.1. CONDUCTED EMISSION MEASUREMENT................................................................................................................. 9 4.2. RADIATED EMISSION ................................................................................................................................................... 13 4.3. 20DB BANDWIDTH ..................................................................................................................................................... 17 4.4. BAND EDGE TEST TEST................................................................................................................................................. 19 4.5. ANTENNA REQUIREMENT ............................................................................................................................................. 21 5. EUT TEST PHOTO .................................................................................................................................................... 22 6. PHOTOGRAPHS OF EUT CONSTRUCTIONAL ............................................................................................................ 23 Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 4 of 23 Report No.: GTI20180934F-2 1. SUMMARY 1.1. Test Standards The tests were performed according to following standards: FCC Rules Part 15.249: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices 1.2. Test Description FCC PART 15 15.249 FCC Part 15.207 AC Power Conducted Emission PASS FCC Part 15.249 (a) (d) Radiated Emissions PASS /15.209 FCC Part 15.249 (a) Spurious RF Conducted Emission N/A FCC Part 15.215(c) 20dB Occupied Band Width PASS FCC Part 15.249 (d) Band edge Test PASS FCC Part 15.203 Antenna requirement PASS Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 5 of 23 Report No.: GTI20180934F—2 1.3. Test Facility 1.3.1 Address of the test laboratory Shenzhen General Testing & Inspection Technology Co., Ltd. Add: 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China 1.3.2 Laboratory accreditation The test facility is recognized, certified, or accredited by the following organizations: IC Registration No.: 9783A The 3m alternate test site of Shenzhen GTI Technology Co., Ltd.EMC Laboratory has been registered by Certification and Engineer Bureau of Industry Canada for the performance of with Registration NO.: 9783A on Jan, 2016. FCC—Registration No.: 951311 Shenzhen GTI Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 951311, Aug 26, 2017 1.4.Measurement Uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 — 4 Specification for radio disturbance and immunity measuring apparatus and methods — Part 4: Uncertainty in EMC Measurements and is documented in the Shenzhen General Testing & Inspection Technology Co., Ltd quality system ace. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for General Testing & Inspection laboratory is reported: Test Items Measurement Uncertainty Notes Transmitter power conducted 0.57 dB (1) Transmitter power Radiated 2.20 dB (1) Conducted spurious emission 9KHz—40 GHz 1.60 dB (1) Radiated spurious emission 9KHz—40 GHz 2.20 dB (1) Conducted Emission 9KHz—30MHz 3.39 dB (1) Radiated Emission —30~1000MHz 4.24 dB (1) Radiated Emission 1~18GHz 5.16 dB (1) Radiated Emission 18—40GHz 5.54 dB (1) Occupied Bandwidth o=—==————— (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96. Shenzhen General Testing & Inspection Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel.: (86)755—27521059 Fax.: (86)755—27521011 Http:/www.sz—ctc.org.cn q PRRsni=Tk##esrs i ie e ie e en is e¥ For anti—fake verification, please visit the official website of Certification and Accreditation Administration of the People‘s Republic of China : yz.cncaic.cn

Page 6 of 23 Report No.: GTI20180934F-2 2. GENERAL INFORMATION 2.1. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Temperature: 15~35°C Relative Humidity: 30~75 % Air Pressure: 950~1050mba 2.2. General Description of EUT Product Name: KICKR HEADWIND Model/Type reference: WF126US Power supply: 100-120V 50-60Hz 1.3A 65W Hardware version: V1.0 Software version: V1.0 ANT+: Supported type: ANT+ Modulation: GFSK Operation frequency: 2457MHz Channel number: 1 Channel separation: / Antenna type: Ceramic Antenna Antenna gain: 5.46dBi Note: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 7 of 23 Report No.: GTI20180934F-2 2.3. Description of Test Modes Peripherals Devices: OUTSIDE SUPPORT EQUIPMENT No. Equipment Model Serial No. Manufacture Trade name Remark iPhone 6 1 iPhone A1524 Apple Apple / plus Note: All the above equipment /cable were placed in worse case position to maximize emission signals during emission test. Operation Frequency The Applicant provides communication tools software to control the EUT for staying in continuous transmitting (Duty Cycle more than 98%) mode for testing. ANT+ Channel Frequency (MHz) 01 2457 Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 8 of 23 Report No.: GTI20180934F-2 2.4. Measurement Instruments List Maximum Conducted Output Power Calibrated Item Test Equipment Manufacturer Model No. Serial No. until 1 Power Meter Anritsu ML2487B 110553 Jan. 04,2019 2 Power Sensor Anritsu MA2411B 100345 Jan. 04,2019 3 Spectrum Analyzer R&S FSU26 100105 Jan. 04,2019 1. Power Spectral Density / 6dB Bandwidth / Band Edge Compliance of RF Emission / Spurious RF Conducted Emission Calibrated Item Test Equipment Manufacturer Model No. Serial No. until 1 Spectrum Analyzer R&S FSU26 100105 Jan. 04,2019 2. Conducted Emission Item Test Equipment Manufacturer Model No. Serial No. Calibrate until 1 LISN R&S ENV216 101112 Jan. 04,2019 2 LISN R&S ENV216 101113 Jan. 04,2019 3 EMI Test Receiver R&S ESCI 100920 Jan. 04,2019 4 Cable Schwarzbeck AK9515E 33156 Jan. 04,2019 3. Radiated Emission Calibrated Item Test Equipment Manufacturer Model No. Serial No. until 1 EMI Test Receiver R&S ESCI 100658 Jan. 04,2019 2 High pass filter micro-tranics HPM50111 34202 Jan. 04,2019 3 Log-Bicon Antenna Schwarzbeck CBL6141A 4180 Jan. 04,2019 Ultra-Broadband 4 ShwarzBeck BBHA9170 25841 Jan. 04,2019 Antenna 5 Loop Antenna LAPLAC RF300 9138 Jan. 04,2019 6 Spectrum Analyzer Rohde & Schwarz FSU 100105 Jan. 04,2019 7 Horn Antenna Schwarzbeck BBHA 9120D 647 Jan. 04,2019 8 Pre-Amplifier HP 8447D 1937A03050 Jan. 04,2019 EMC05183 9 Pre-Amplifier EMCI 980075 Jan. 04,2019 5 10 Antenna Mast UC UC3000 N/A N/A 11 Turn Table UC UC3000 N/A N/A 12 Cable Below 1GHz Schwarzbeck AK9515E 33155 Jan. 04,2019 SUCOFLEX1 13 Cable Above 1GHz Hubersuhner DA1580 Jan. 04,2019 02 Note: 1. The Cal.Interval was one year. 2. The cable loss has calculated in test result which connection between each test instruments. Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 9 of 23 Report No.: GTI20180934F-2 4. TEST CONDITIONS AND RESULTS 4.1. CONDUCTED EMISSION MEASUREMENT Limit POWER LINE CONDUCTED EMISSION (Frequency Range 150KHz-30MHz) Class A (dBuV) Class B (dBuV) FREQUENCY (MHz) Quasi-peak Average Quas -peak Average 0.15 -0.5 79.00 66.00 66 - 56 * 56 - 46 * 0.50 -5.0 73.00 60.00 56.00 46.00 5.0 -30.0 73.00 60.00 60.00 50.00 Note: (1) The tighter limit applies at the band edges. (2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Setting Attenuation 10 dB Start Frequency 0.15 MHz Stop Frequency 30 MHz IF Bandwidth 9 kHz Test Procedure 1. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. 2. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. 3. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m.Repeat above procedures until all frequency measurements have been completed. 4. LISN at least 80 cm from nearest part of EUT chassis. 5. For the actual test configuration, please refer to the related Item –EUT Test Photos. Test Configuration For the actual test configuration, please refer to the related Item –EUT Test Photos. Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

mm t n n t n t mm mgm m n m n n mt e n m n t Vertical Reference / G round Plane ,/TestReceiver —t————gim— E._._..._.__J 80c m IS H | | | | N m \H orizontal Reference G round Plane N ote: 1.Support units were connected to second LISHX. 2.B oth of LISHN s (ANM N) are 80 cm from EUT and at least 80 from other units and other metal planes HMyU SRA Alt® "I c EEitmIercCEEEE

Page 11 of 23 Report No.: GTI20180934F—2 TEST RESULTS Temperature : 23.5 °C Relative Humidity : |60% Pressure : 101 Kpa Test Date : 2018—04—10 Test Mode : ANT+ Phase : L Test Voltage :_ |AC 120V/60Hz 1207 1007 ay[#P*"#% ECC Part 15 B_OP Level in dBuV % ~—_.. ECC Part.15 8. AV —20 \ \ \ t————————A \ j u t————t——t j u | 150k 300 400500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency QuasiPeak Meas. Time Bandwidth Filter Line Corr. Margin Limit Comment (MHz) (dBuV) (ms) (kHz) (dB) (dB) (dBu V) 0.177000 62.5 1000.000 9.000 Off L1 10.0 21 64.6 0.780000 35.5 1000.000 9.000 Off L1 9.9 20.5| 56.0 0.789000 35.3 1000.000 9.000 Off L1 9.9 20.7 56.0 Frequency Average Meas. Time Bandwidth Filter Line Corr. Margin Limit Comment (MHz) (dBuV) (ms) (kHz) (dB) (dB) (dBu V) 0.181500 50.4 1000.000 9.000 Off L1 10.0 4.0 54.4 18.150000 24.1 1000.000 9.000 Off L1 9.9 25.9 50.0 18.244500 19.4 1000.000 9.000 Off L1 9.9 30.6| 50.0 Shenzhen General Testing & Inspection Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel.: (86)755—27521059 Fax.: (86)755—27521011 Http:/www.sz—ctc.org.cn q PREXMIMTkE@RZTAA im in en e For anti—fake verification, please visit the official website of Certification and Accreditation Administration of the People‘s Republic of China : yz.cncaic.cn

Page 12 of 23 Report No.: GTI20180934F-2 Temperature： 23.5 ℃ Relative Humidity： 60% Pressure： 101 Kpa Test Date : 2018-04-10 Test Mode： ANT+ Phase : N Test Voltage ： AC 120V/60Hz Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 13 of 23 Report No.: GTI20180934F—2 4.2.Radiated Emission Limit For intentional device, according to§ 15.209(a), § 15.249(a), the general requirement of field strength of radiated emission from intentional radiators at a distance of 3 meters shall not exceed the following table. The frequency spectrum above 1 GHz for Transmitter was investigated. All emission not reported are much lower than the prescribed limits. Set the RBW=1MHz, VBW=3MHz for Peak Detector while the RBW=1MHz, VBW=10Hz for Average Detector, Readings are both peak and average values. The pre—test have done for the EUT in three axes and found the worst emission at position shown in test setup photos. Frequency (MHz) Distance (Meters) Radiated (dBuV/m) Radiated (uV/m) 0.009—0.49 3 20l0g(2400/F (KHz))+40l10g(300/3) 2400/F (KHz) 0.49—1.705 3 2010g(24000/F(KHz))+ 4010g(30/3) 24000/F (KHz) 1.705—30 3 2010g(30)+ 4010g(30/3) 30 30—88 3 40.0 100 88—216 3 43.5 150 216—960 3 46.0 200 Above 960 3 54.0 500 Test Procedure 1. The EUT was placed on a turn table which is 0.8m(below 1GHz)or1.5m(above 1GHz) above ground plane. 6. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0°C_ to 360°C to acquire the highest emissions from EUT 7. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 8. Repeat above procedures until all frequency measurements have been completed. Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain and Duty Cycle Correction Factor (if any) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CL — AG Where __FS = Field Strength CL = Cable Attenuation Factor (Cable Loss) RA = Reading Amplitude AG = Amplifier Gain AF = Antenna Factor For example Frequency FS RA AF CL AG Transd (MHz) (dBuV/m) (dBuV/m) (dB) (dB) (dB) (dB) 150.00 40 58.1 12.2 1.6 31.90 —18.1 Transd=AF +CL—AG Test Configuration Shenzhen General Testing & Inspection Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel.: (86)755—27521059 Fax.: (86)755—27521011 Http:/www.sz—ctc.org.cn Eenc EEe eos o S o o For anti—fake verification, please visit the official website of Certification and Accreditation Administration of the People‘s Republic of China : yz.cncaic.cn

Page 14 of 23 Report No.: GTI20180934F-2 For the actual test configuration, please refer to the related Item –EUT Test Photos. Frequency range 9 KHz – 30MHz Frequency range 30MHz – 1000MHz Frequency range above 1GHz-25GHz Test Results Remark: Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 15 of 23 Report No.: GTI20180934F-2 For 9 KHz-30MHz The test results of 9kHz-30MHz is attenuated more than 20dB below the permissible limits, so the results don't record in the report. For 30MHz-1GHz Horizontal Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 16 of 23 Report No.: GTI20180934F-2 Vertical Frequenc Meter Pre-amplif Cable Antenna Emission Limits Margin Polar y Reading ier Loss Factor Level Detector (H/V) (MHz) (dBuV) (dB (dB) (dB/m) (dBuV/m) (dBuV/m) (dB) Type H 2457 87.56 36.2 4.25 30.1 85.71 114 -28.29 PK H 2457 70.23 36.2 4.25 30.1 68.38 94 -25.62 AV V 2457 88.22 36.2 4.25 30.1 86.37 114 -27.63 PK V 2457 71.24 36.2 4.25 30.1 69.39 94 -24.61 AV REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below average limit. 5. The other emission levels were very low against the limit. Above 1GHz emission please refer to C180620Z02-RP1 Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 17 of 23 Report No.: GTI20180934F-2 4.3. 20dB Bandwidth Limit unwanted emissions outside of the frequency bands shown in these alternative provisions must be attenuated to the emission limits shown in §15.209. Test Procedure 1. The transmitter output was connected to the spectrum analyzer. 2. Set SA as follow: a) RBW: 100 kHz. b) VBW: ≥ 3 × RBW. c) Detector: Peak. d) Trace mode: max hold. e) Sweep: auto couple. 3. Allow the trace to stabilize. 4. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. Test Configuration EUT SPECTRUM ANALYZER Test Results ANT+ 99% 20dB Bandwidth Type Channel Bandwidth Result (MHz) (MHz) GFSK 00 1.1279 0.9870 Pass Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 18 of 23 Report No.: GTI20180934F-2 Test plot as follows: Date: 13.JUN.2018 14:29:11 Date: 13.JUN.2018 14:32:11 Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 19 of 23 Report No.: GTI20180934F-2 Band edge Test Test Limit For intentional device, according to§ 15.249(d), Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in 15.209, whichever is the lesser attenuation. Test Procedure The frequency spectrum above 1 GHz for Transmitter was investigated. All emission not reported are much lower than the prescribed limits. Set the RBW=1MHz, VBW=3MHz for Peak Detector while the RBW=1MHz, VBW=10Hz for Average Detector, Readings are both peak and average values. The pre-test have done for the EUT in three axes and found the worst emission at position shown in test setup photos. 1. The EUT was placed on a turn table which is 0.8m(below 1GHz)or1.5m(above 1GHz) above ground plane 2. . The table was rotated 360 degrees to determine the position of the highest radiation. 3. The EUT was set 3 meters away from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. 4. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 5. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 6. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 7. Place a marker at the end of the restricted band closest to the transmit frequency to show compliance. Also measure any emissions in the restricted bands. Save the spectrum analyzer plot. Repeat for each power and modulation for lowest and highest channel 8. Test the EUT in the lowest channel, the highest channel 9. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, only the test worst case mode is recorded in the report. 10. Repeat above procedures until all frequencies measured was complete. Field Strength Calculation The field strength is calculated by adding the Antenna Factor and Cable Factor and subtracting the Amplifier Gain and Duty Cycle Correction Factor (if any) from the measured reading. The basic equation with a sample calculation is as follows: FS = RA + AF + CL – AG Where FS = Field Strength CL = Cable Attenuation Factor (Cable Loss) RA = Reading Amplitude AG = Amplifier Gain AF = Antenna Factor For example Frequency FS RA AF CL AG Transd (MHz) (dBμV/m) (dBμV/m) (dB) (dB) (dB) (dB) 150.00 40 58.1 12.2 1.6 31.90 -18.1 Transd=AF +CL-AG Test Configuration Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 20 of 23 Report No.: GTI20180934F-2 For the actual test configuration, please refer to the related Item –EUT Test Photos. Frequency range 30MHz – 1000MHz Frequency range above 1GHz-25GHz Test Results Remark: 2457MHz Frequenc Meter Pre-amplif Cable Antenna Emission Polar Limits Margin Detector y Reading ier Loss Factor Level (H/V) (MHz) (dBuV) (dB (dB) (dB/m) (dBuV/m) (dBuV/m) (dB) Type H 2390.00 45.15 36.12 3.32 27.50 41.65 74 -32.35 PK H 2390.00 35.21 36.12 3.32 27.50 32.45 54 -21.55 AV V 2390.00 45.37 36.12 3.32 27.50 42.54 74 -31.46 PK V 2390.00 36.22 36.12 3.32 27.50 32.79 54 -21.21 AV 2457MHz Frequenc Meter Pre-amplif Cable Antenna Emission Polar Limits Margin Detector y Reading ier Loss Factor Level (H/V) (MHz) (dBuV) (dB (dB) (dB/m) (dBuV/m) (dBuV/m) (dB) Type H 2483.50 46.12 36.55 3.38 27.50 41.25 74 -32.75 PK H 2483.50 35.83 36.55 3.38 27.50 33.65 54 -20.35 AV V 2483.50 47.52 36.55 3.38 27.50 43.68 74 -30.32 PK V 2483.50 36.28 36.55 3.38 27.50 33.96 54 -20.04 AV Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 21 of 23 Report No.: GTI20180934F—2 4.4. Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited Result The EUT‘s antenna used a Antenna, soldered on the PCB., The antenna‘s gain is 5.46 dBi. Complying with the standard requirement. Test Result: . ~ hi\ oT o H1 o BT/ANT+ E Antenna Shenzhen General Testing & Inspection Technology Co., Ltd. 1—2/F., Building 2, Jiaquan Building, Guanlan High—Tech Park, Shenzhen, Guangdong, China Tel.: (86)755—27521059 Fax.: (86)755—27521011 Http:/www.sz—ctc.org.cn EN blesltor—o in top 3: E4af Fo" ant_i-fa_ke verifiga}tion,_please visit the official wet_)site of _Certification and ons iudialasel udiiiiidiouer ind Coniliararireiend Accreditation Administration of the People‘s Republic of China : yz.cncaic.cn

Page 22 of 23 Report No.: GTI20180934F-2 5. EUT TEST PHOTO Please reference to the annex: Test Photo Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 23 of 23 Report No.: GTI20180934F-2 6. PHOTOGRAPHS OF EUT CONSTRUCTIONAL Please reference to the annex: Extra EUT Photo and Internal EUT Photo **********************THE END********************** Shenzhen General Testing & Inspection Technology Co., Ltd. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax.: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn


Document Created: 2018-07-11 15:58:52
Document Modified: 2018-07-11 15:58:52
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC