modular approval letter

FCC ID: P53-EMW3092

Cover Letter(s)

Download: PDF
FCCID_4252262

MODULAR APPROVAL LETTER FCC ID: P53-EMW3092 Modular Approval Requirement Yes No (i) The radio elements of the modular transmitter YES must have their own shielding. The physical crystal The modular and tuning capacitors may be located external to transmitter the shielded radio elements. have its own RF shielding (ii) The modular transmitter must have buffered YES modulation/data inputs (if such inputs are The modular provided) to ensure that the module will comply accord with Part with part 15 requirements 15 requirements under conditions of excessive data rates or over-modulation. (iii) The modular transmitter must have its own YES power supply regulation. The modular It has its own power supply regulation (iv) The modular transmitter must comply with the YES antenna and transmission system requirements of The modular §§ 15.203, 15.204(b) and 15.204(c). The antenna accord with the must either be permanently attached or employ a antenna ‘‘unique’’ antenna coupler (at all connections requirements of between the module and the antenna, including the Section 15.203 cable). The ‘‘professional installation’’ provision of § and 15.203 is not applicable to modules but can apply 15.204(b)(c) to limited modular approvals under paragraph (b) of this section. (v) The modular transmitter must be tested in a YES stand-alone configuration (vi) The modular transmitter must be equipped with YES either a permanently affixed label or must be The modular capable of electronically displaying its FCC have one identification number. permanently affixed label (vii) The modular transmitter must comply with any YES specific rules or operating requirements that The modular ordinarily apply to a complete transmitter and the transmitter manufacturer must provide adequate instructions accord with any along with the module to explain any such specific rule or requirements. A copy of these instructions must be operating included in the application for equipment requirements authorization. /Users/haiqin/Desktop/递交资料/P53-EMW3092_FCC ID_Modular-Approval-Letter_140225.docx

(viii) The modular transmitter must comply with YES any applicable RF exposure requirements in its final The modular configuration. transmitter accord RF exposure requirements The letter must be on the applicant’s letterhead and signed by the grantee code contact. Signature: Date: ___2019-04-17 Chen Jiang/ Hardware Engineer Shanghai MXCHIP Information Technology Co.,Ltd. /Users/haiqin/Desktop/递交资料/P53-EMW3092_FCC ID_Modular-Approval-Letter_140225.docx


Document Created: 2019-04-22 04:57:33
Document Modified: 2019-04-22 04:57:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC