Labeling Requirements

FCC ID: P4M-EMIVV2

ID Label/Location Info

Download: PDF
FCCID_747413

AnyDATA Corporation FCC ID: P4M-EMIVV2 EXHIBIT A - FCC ID LABELING AND WARNING STATEMENT FCC ID Label The FCC labels should contain FCC statement in FCC 15.19 paragraph (3). A sample of the statement is presented hereinafter as reference. Also, as per FCC §15.19 a(4) Where a device is constructed in two or more sections connected by wires and marketed together, the statement specified above is required to be affixed only to the main control unit. If the EUT is integrated within another device then a label affixed to the host shall also state, “Contains FCC ID: P4M-EMIVV2” FCC ID: P4M-EMIVV2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 1.0" conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.1875" Proposed Label Location on EUT Bottom View of EUT / Proposed FCC ID Location As per FCC §15.19 (b) (4), the label shall not be a stick-on, paper label. The label on these products shall be permanently affixed to the product and shall be readily visible to the purchaser at the time of purchase, as described in Section 2.925(d) of this chapter. "Permanently affixed" means that the label is etched, engraved, stamped, silk-screened, indelibly printed, or otherwise permanently marked on a permanently attached part of the equipment or on a nameplate of metal, plastic, or other material fastened to the equipment by welding, riveting, or a permanent adhesive. The label must be designed to last the expected lifetime of the equipment in the environment in which the equipment may be operated and must not be readily detachable. Report # R0610274-22 Page 40 of 47 FCC Part 22, 24 Type Approvals Report


Document Created: 2007-01-12 21:01:13
Document Modified: 2007-01-12 21:01:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC