MPE Report

FCC ID: P3TDH737

RF Exposure Info

Download: PDF
FCCID_4389632

849 NW STATE ROAD 45 PHONE: 888.472.2424 OR 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: INFO@TIMCOENGR.COM WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company RF Exposure Evaluation Report APPLICANT FIPLEX COMMUNICATIONS INC. 2101 NW 79th Ave. ADDRESS MIAMI FL 33122 USA FCC ID P3TDH737 MODEL NUMBER DH737 PRODUCT DESCRIPTION 700MHZ BAND INDUSTRIAL BOOSTER DATE SAMPLE RECEIVED 07/15/2019 FINAL TEST DATE 07/26/2019 PREPARED BY Franklin Rose TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 1803AUT19 Rev1 Initial Issue 08/02/2019 MPE_TestReport_ THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 2 GENERAL INFORMATION ................................................................................................ 3 ANTENNA INFORMATION ............................................................................................... 3 MPE CALCULATION ......................................................................................................... 3 MPE TABLE ..................................................................................................................... 5 GENERAL UNCONTROLLED EXPOSURE ......................................................................................... 5 GENERAL CONTROLLED EXPOSURE ............................................................................................ 6

GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Prepared by: Name and Title Franklin Rose, Project Manager / EMC Specialist Date 08/02/2019 Applicant: FIPLEX COMMUNICATIONS INC. FCC ID: P3TDH737 Report: 1803AUT19 MPE_TestReport_Rev1 Page 2 of 6

GENERAL INFORMATION EUT Description 700 BAND INDUSTRIAL BOOSTER Model Number DH737 ☒110–120Vac, 50– EUT Power Source ☐ DC Power ☐ Battery Operated 60Hz ☐ Engineering Test Item ☒ Pre-Production ☐ Production Prototype Type of Equipment ☒ Fixed ☐ Mobile ☐ Portable Antenna Connector external N Type The temperature was 26ºC Test Conditions Relative humidity of 50%. Modification to the EUT No Modification to EUT. Applicable Standards FCC CFR 47 Part 2.1091 Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL Test Facility 32669 USA. Designation #: US1070 ANTENNA INFORMATION Manufacturer Provides Max Gain Type Antenna (dBi) No Unspecified 0 dBi POWER OUTPUT OF EUT Maximum Output Frequency (+Tune-up Output (W) Tolerance) (dBm) 800.00 39.00 7.94 The output power levels of the Uplink and Downlink of this Distributed Antenna System Industrial Signal Booster have been evaluated together for a worst-case MPE Safety Distance. Applicant: FIPLEX COMMUNICATIONS INC. FCC ID: P3TDH737 Report: 1803AUT19 MPE_TestReport_Rev1 Page 3 of 6

MPE CALCULATION The minimum separation distance is calculated as follows: MPE LIMITS Applicant: FIPLEX COMMUNICATIONS INC. FCC ID: P3TDH737 Report: 1803AUT19 MPE_TestReport_Rev1 Page 4 of 6

MPE Table General Uncontrolled Exposure The limit for General Uncontrolled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table B: Variable Value Max Power 7.94 W Frequency Range 758 – 805 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dB Coax Loss 0 dB Power Density 0.505 mW/cm2 Minimum Separation Distance 35.36 cm 2 35.36 cm 0.505 mW/cm 2 20 cm 1.58 mW/cm (Standard MPE Distance) EUT Applicant: FIPLEX COMMUNICATIONS INC. FCC ID: P3TDH737 Report: 1803AUT19 MPE_TestReport_Rev1 Page 5 of 6

General Controlled Exposure The limit for General Controlled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table A: Variable Value Max Power 7.94 W Frequency Range 758 – 805 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dBi Coax Loss 0 dB Power Density 1.58 mW/cm2 Minimum Separation Distance 20 cm 2 20 cm 1.58 mW/cm (Standard MPE Distance) 2 15.81 cm 2.53 mW/cm EUT Applicant: FIPLEX COMMUNICATIONS INC. FCC ID: P3TDH737 Report: 1803AUT19 MPE_TestReport_Rev1 Page 6 of 6


Document Created: 2019-08-05 17:06:38
Document Modified: 2019-08-05 17:06:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC