Test Report MPE

FCC ID: P27SZKPD04N

Test Report

Download: PDF
FCCID_4038206

FCC ID: P27SZKPD04N Page: 1 / 7 Report No.: T180727D04-MF Rev.: 00 IEEE C95.1 2005 KDB 447498 D01 V06 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For Zigbee Keypad Model: SZ-KPD04, SZ-KPD04Nxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, a to z, "blank" or “-“ , for marking purpose) Trade Name: Sercomm; Stanley Security; Scout Alarm Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com Issued Date: September 25, 2018 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路 11 號 t:(886-2) 2299-9720 f:(886-2) 2298-1882 www.sgs.tw www.ccsrf.com

Page: 2 / 7 Report No.: T180727D04-MF Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 September 25, 2018 Initial Issue ALL May Lin

Page: 3 / 7 Report No.: T180727D04-MF Rev.: 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ........................................................................ 4 2. LIMIT .................................................................................................................... 5 3. EUT SPECIFICATION .......................................................................................... 5 4. TEST RESULTS................................................................................................... 6 5. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 7

Page: 4 / 7 Report No.: T180727D04-MF Rev.: 00 1. TEST RESULT CERTIFICATION We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. APPLICABLE STANDARDS STANDARD TEST RESULT IEEE C95.1 2005 KDB 447498 D03 No non-compliance noted 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 Approved by: Reporter: Sam Chuang May Lin Manager Report coordinator Compliance Certification Services Inc. Compliance Certification Services Inc.

Page: 5 / 7 Report No.: T180727D04-MF Rev.: 00 2. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 3. EUT SPECIFICATION EUT Zigbee Keypad SZ-KPD04, SZ-KPD04Nxxxxxxxx (the 1st x should be "blank" or "-"; the rest x could Model be 0 to 9, A to Z, a to z, "blank" or “-“ , for marking purpose) Trade Name Sercomm; Stanley Security; Scout Alarm The suffix of “x” (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, a Model Discrepancy to z, "blank" or “-“, for marking purpose) Frequency band Zigbee: 2405~2480MHz (Operating) Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm 2) Exposure General Population/Uncontrolled exposure classification (S=1mW/cm2) Antenna Specification Zigbee: Antenna Gain : 1.00 dBi (Numeric gain:1.26) Max tune up Power Zigbee: 9.00 dBm (7.943 mW) MPE Evaluation* Evaluation applied SAR Evaluation N/A

Page: 6 / 7 Report No.: T180727D04-MF Rev.: 00 4. TEST RESULTS No non-compliance noted. Calculation 30  P  G E2 Given E & S d 377 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S 377d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  P / 1000  G PG S  0.0796  Equation 1 377  d / 100 2 d2 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2

Page: 7 / 7 Report No.: T180727D04-MF Rev.: 00 5. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: S  0.000199  P  G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Zigbee: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 18 2440 7.943 1.26 20 0.0020 1 --End of Report--


Document Created: 2018-09-21 16:13:02
Document Modified: 2018-09-21 16:13:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC