RF exposure info.

FCC ID: P27RP101

RF Exposure Info

Download: PDF
FCCID_1650274

Compliance Certification Services Inc. FCC ID: P27RP101 Report No.: T120117D04-RP1 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. EUT Specification EUT IEEE802.11n 2.4GHz 2x2 repeater WLAN: 2.412GHz ~ 2.462GHz Frequency band WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz (Operating) WLAN: 5.745GHz ~ 5.825GHz Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) Exposure classification General Population/Uncontrolled exposure (S=1mW/cm2) Single antenna Multiple antennas Antenna diversity Tx diversity Rx diversity Tx/Rx diversity IEEE 802.11b mode: 19.65 dBm (92.26 mW) IEEE 802.11g mode: 19.75 dBm (94.41 mW) Max. output power IEEE 802.11n HT 20 MHz mode: 20.93 dBm (123.88 mW) IEEE 802.11n HT 40 MHz mode: 20.98 dBm (125.31 mW) Dipole Antenna / Gain: 2.33 dBi (Numeric gain: 1.71) MIMO Mode: Antenna gain (Max) Total ANT =10*LOG(((10^(ANT0/20)+10^(ANT2/20))^2)/2) =5.34 dBi (Numeric gain: 3.42) MPE Evaluation* Evaluation applied SAR Evaluation N/A Remark: The maximum output power is 20.98dBm (125.31mW) at 2442MHz (with 3.42 numeric antenna gain.) MPE EVALUATION No non-compliance noted. Page 125 Rev. 00

Compliance Certification Services Inc. FCC ID: P27RP101 Report No.: T120117D04-RP1 Calculation 30 × P × G E2 Given E= & S= d 3770 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30 × P × G S= 3770d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30 × (P / 1000) × G P×G S= = 0.0796 × 2 Equation 1 3770 × (d / 100) 2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields S = 0.000199 × P × G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Page 126 Rev. 00

Compliance Certification Services Inc. FCC ID: P27RP101 Report No.: T120117D04-RP1 IEEE 802.11b mode: EUT output power = 92.26 mW Numeric Antenna gain = 1.71 Æ Power density = 0.0314 mW / cm2 IEEE 802.11g mode: EUT output power = 94.41 mW Numeric Antenna gain = 3.42 Æ Power density = 0.0321 mW / cm2 IEEE 802.11n HT 20 MHz mode: EUT output power = 123.88 mW Numeric Antenna gain = 3.42 Æ Power density = 0.0843 mW / cm2 IEEE 802.11n HT 40 MHz mode: EUT output power = 125.31 mW Numeric Antenna gain = 3.42 Æ Power density = 0.0853 mW / cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger.) Page 127 Rev. 00


Document Created: 2012-03-01 15:02:47
Document Modified: 2012-03-01 15:02:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC