Test Report MPE

FCC ID: P27RC845

Test Report

Download: PDF
FCCID_4406396

FCC ID: P27RC845 Page: 1/9 Report No.: T190503D08-MF Rev.: 00 IEEE C95.1 2005 KDB 447498 D01 V06 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For FHD Wireless Indoor Camera Model: RC845xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, A to Z, a to z, "blank" or "-", for marketing purpose) Trade Name: ADT Issued to Sercomm Corporation 8F, No. 3-1, YuanQu St., NanKang, Taipei 115, Taiwan. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Issued Date: July 26, 2019 No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路 11 號 t:(886-2) 2299-9720 f:(886-2) 2298-1882 www.sgs.tw www.ccsrf.com

Page: 2/9 Report No.: T190503D08-MF Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 July 26, 2019 Initial Issue ALL May Lin

Page: 3/9 Report No.: T190503D08-MF Rev.: 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ......................................................................... 4 2. LIMIT .................................................................................................................... 5 3. EUT SPECIFICATION .......................................................................................... 6 4. TEST RESULTS ................................................................................................... 8 5. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 9

Page: 4/9 Report No.: T190503D08-MF Rev.: 00 1. TEST RESULT CERTIFICATION We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. APPLICABLE STANDARDS STANDARD TEST RESULT IEEE C95.1 2005 KDB 447498 D03 No non-compliance noted 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Approved by: Test by: Kevin Tsai May Lin Deputy Manager Report coordinator Compliance Certification Services Inc. Compliance Certification Services Inc.

Page: 5/9 Report No.: T190503D08-MF Rev.: 00 2. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.

Page: 6/9 Report No.: T190503D08-MF Rev.: 00 3. EUT SPECIFICATION EUT FHD Wireless Indoor Camera RC845xxxxxxxx (the 1st x should be "blank" or "-"; the rest x could be 0 to 9, Model A to Z, a to z, "blank" or "-", for marketing purpose) Trade Name ADT All the above models are identical except for the designation of model numbers. The suffix of (The 1st x should be "blank" or "-"; the rest x could be Model Discrepancy 0 to 9, A to Z, a to z, "blank" or "-") on model number is just for marketing purpose only. 802.11b/g/n HT20: 2412MHz ~ 2462MHz 802.11n HT40: 2422MHz ~ 2452MHz Frequency band 802.11a/n HT20: 5180MHz ~ 5240MHz / 5720MHz ~ 5825MHz (Operating) 802.11n HT40: 5190MHz ~ 5230MHz / 5755MHz ~ 5795MHz 802.11ac VHT80: 5210MHz / 5775MHz Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) Exposure General Population/Uncontrolled exposure classification (S=1mW/cm2) 2.4G Peak Ant No. Operating Band Type Material Gain Ant 1 WiFi 2.4G/5G Dipole PCB 2.74 dBi Ant 2 WiFi 2.4G/5G Dipole PCB 1.93 dBi 1. Power Directional Gain: 2.35 5G Antenna Peak Specification Ant No. Operating Band Type Material Gain Ant 1 WiFi 2.4G/5G Dipole PCB 4.97 dBi Ant 2 WiFi 2.4G/5G Dipole PCB 4.24 dBi 1. Power Directional Gain: 4.62 2.4GHz: Directional Gain : 2.35 dBi (Numeric gain: 1.72) Worst 5GHz: Directional Gain : 4.62 dBi (Numeric gain: 2.90) Worst

Page: 7/9 Report No.: T190503D08-MF Rev.: 00 2.4GHz IEEE 802.11b Mode: 22.30 dBm (169.824 mW) IEEE 802.11g Mode: 20.30 dBm (107.152 mW) IEEE 802.11n HT 20 Mode: 23.66 dBm (232.274 mW) Max tune up Power IEEE 802.11n HT 40 Mode: 22.30 dBm (169.824 mW) 5GHz IEEE 802.11a Mode: 24.60 dBm (288.403 mW) IEEE 802.11n HT 20 Mode: 24.70 dBm (295.121 mW) IEEE 802.11n HT 40 Mode: 24.20 dBm (263.027 mW) IEEE 802.11ac VHT 80 Mode: 23.70 dBm (234.423 mW) MPE Evaluation* Evaluation applied SAR Evaluation N/A

Page: 8/9 Report No.: T190503D08-MF Rev.: 00 4. TEST RESULTS No non-compliance noted. Calculation 30  P  G E2 Given E & S d 377 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S 377 d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  P / 1000   G PG S  0.0796  2 Equation 1 377  d / 100  2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2

Page: 9/9 Report No.: T190503D08-MF Rev.: 00 5. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: S  0.000199  P  G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 IEEE 802.11b mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 11 2462 169.824 1.72 20 0.0581 1 IEEE 802.11g mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 6 2437 107.152 1.72 20 0.0367 1 IEEE 802.11n HT20 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 1 2412 232.274 1.72 20 0.0795 1 IEEE 802.11n HT40 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 3 2422 169.824 1.72 20 0.0581 1 IEEE 802.11a mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 165 5825 288.403 2.9 20 0.1664 1 IEEE 802.11n HT20 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 157 5785 295.121 2.9 20 0.1703 1 IEEE 802.11n HT40 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 159 5795 263.027 2.9 20 0.1518 1 IEEE 802.11ac VHT80 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 155 5775 234.423 2.9 20 0.1353 1 --End of Test Report--


Document Created: 2019-07-25 14:36:46
Document Modified: 2019-07-25 14:36:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC