Exhibit 11 RF Exposure Report

FCC ID: P27OC810X

RF Exposure Info

Download: PDF
FCCID_1853813

Compliance Certification Services Inc. Reference No: T120113D01-RP1 FCC ID: P27OC810X Report No.: T121126D11-RP1 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. EUT Specification EUT Wireless Camera WLAN: 2.412GHz ~ 2.462GHz Frequency band WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz (Operating) WLAN: 5.745GHz ~ 5.825GHz Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) Exposure classification General Population/Uncontrolled exposure (S=1mW/cm2) Single antenna Multiple antennas Antenna diversity Tx diversity Rx diversity Tx/Rx diversity IEEE 802.11b mode: 20.17 dBm (103.99 mW) IEEE 802.11g mode: 18.59 dBm (72.28 mW) Max. output power IEEE 802.11n HT 20 MHz mode: 22.76 dBm (188.80 mW) IEEE 802.11n HT 40 MHz mode: 21.71 dBm (148.25 mW) Antenna gain (Max) 4.2 dBi (Numeric gain: 2.63) MPE Evaluation* Evaluation applied SAR Evaluation N/A Remark: The maximum output power is 22.76 dBm (188.80 mW) at 2412MHz (with 2.63 numeric antenna gain.) MPE EVALUATION No non-compliance noted. Page 97

Compliance Certification Services Inc. Reference No: T120113D01-RP1 FCC ID: P27OC810X Report No.: T121126D11-RP1 Calculation 30 × P × G E2 Given E= & S= d 3770 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30 × P × G S= 3770d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30 × (P / 1000) × G P×G S= = 0.0796 × 2 Equation 1 3770 × (d / 100) 2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields S = 0.000199 × P × G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Page 98

Compliance Certification Services Inc. Reference No: T120113D01-RP1 FCC ID: P27OC810X Report No.: T121126D11-RP1 IEEE 802.11b mode: EUT output power = 103.99mW Numeric Antenna gain = 2.63 Æ Power density = 0.05442 mW / cm2 IEEE 802.11g mode: EUT output power = 72.28 mW Numeric Antenna gain = 2.63 Æ Power density = 0.03783 mW / cm2 IEEE 802.11n HT 20 MHz mode: EUT output power =188.80 mW Numeric Antenna gain = 2.63 Æ Power density = 0.09881 mW / cm2 IEEE 802.11n HT 40 MHz mode: EUT output power = 148.25mW Numeric Antenna gain = 2.63 Æ Power density = 0.07759 mW / cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm2 even if the calculation indicates that the power density would be larger.) Page 99


Document Created: 2012-12-05 10:28:25
Document Modified: 2012-12-05 10:28:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC