P27-TPM540

FCC ID

Equipment: Cat-M1 Module

Sercomm Corporation -TPM540

8F, No. 3-1, YuanQu St, NanKang, Taipei, N/A 115 Taiwan

Application
Frequency Range
Final Action Date
Granted
cPha+gOYVFtURd2jfg7KbQ==
699.7-715.3
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
700.5-714.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
701.5-713.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
704.0-711.0
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
779.5-784.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
782.0-782.0
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1710.7-1754.3
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1711.5-1753.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1712.5-1752.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1715.0-1750.0
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1717.5-1747.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1720.0-1745.0
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1850.7-1909.3
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1851.5-1908.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1852.5-1907.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1855.0-1905.0
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1857.5-1902.5
2019-02-03
APPROVED
cPha+gOYVFtURd2jfg7KbQ==
1860.0-1900.0
2019-02-03
APPROVED
File NameDocument TypeDateDirect
Users Manual_rev2Users Manual 2019-08-02 00:00:00 pdf
Test setup photosTest Setup Photos 2019-08-02 00:00:00 pdf
Test Report (Part 27) revTest Report 2019-02-03 00:00:00 pdf
Test report (Part 24) revTest Report 2019-02-03 00:00:00 pdf
RF Exposure Info (MPE)RF Exposure Info 2019-02-03 00:00:00 pdf
Label Sample and Label LocationID Label/Location Info 2019-02-03 00:00:00 pdf
Internal photosInternal Photos 2019-08-02 00:00:00 pdf
External photos rev2External Photos 2019-08-02 00:00:00 pdf
Modular Approval Request_revCover Letter(s) 2019-02-03 00:00:00 pdf
Agent authorizationCover Letter(s) 2019-02-03 00:00:00 pdf
Confidentiality request (Short term) revCover Letter(s) 2019-02-03 00:00:00 pdf
Confidentiality request (Long term) rev2Cover Letter(s) 2019-02-03 00:00:00 pdf
Parts ListParts List/Tune Up Info N/A
SchematicsSchematics N/A
Block diagramBlock Diagram N/A
Tune Up ProcedureParts List/Tune Up Info N/A
Operational DescriptionOperational Description N/A
Operational Description(Gerber file) revOperational Description N/A
Operational Description(KDB 996369 Q&A) rev2Operational Description N/A
Operational Description-Antenna Specification revOperational Description N/A

Application Details:

EquipmentCat-M1 Module
FRN0015548027
Grantee CodeP27
Product Code-TPM540
Applicant BusinessSercomm Corporation
Business Address8F, No. 3-1, YuanQu St, NanKang , Taipei,N/A Taiwan 115
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantNick Wu – Engineer
Applicant Phone 2631
Applicant Fax886-2-2655-3965
Applicant Email[email protected]
Applicant MailStop
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
Test Firm ContactKen Liu
Test Firm Phone
Test Firm Fax+886-3-211-5834
Test Firm Email[email protected]
Certified ByAmanda Wu – Senior Specialist
Comment [cPha+gOYVFtURd2jfg7KbQ==]: Power listed is EIRP and ERP for above and below 1 GHz respectively. Single modular approval for mobile RF exposure conditions. This device supports 1.4 MHz bandwidth mode (LTE CAT-M1) for LTE bands 2, 4, 12 and 13. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of “20 cm” and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC