Manual

FCC ID: OYK-TX0002G4-1202

Users Manual

Download: PDF
FCCID_1701451

4 ENGLISH EI-3895a ENGLISH 1 4. Flight control: Hover up and down: Hover up When the helicopter flies steadily, slowly push the throttle stick up to For Ages 15+ make helicopter fly higher, or lower the stick a bit to make helicopter This product is in compliance LOW BATTERY (HELI COPTER) Ab 15 Jahre with the essential CHARGE/ ON fly lower. Only small amounts of stick position change are required BLACK HAWK and the Black Hawk helicopter design are Pour 15 ans et plus trademarks of Sikorsky Aircraft Corporation. requirements and other OFF for smooth flying. They are licensed throughout the Territory to Silverlit Toys Voor leeftijd 15+ Manufactory Ltd. relevant provisions of Para 15+ años LIGHT L ST. TRIM R Dai 15 anni in su Directive 1999/5/EC. Hover down Delivery contents LOW BATTERY (HELI COPTER) CHARGE/ ON OFF Turn left and right: LIGHT L ST. TRIM R Maintain the helicopter at a certain height. Push the direction stick LOW BATTERY (HELI COPTER) toward left to turn the helicopter anticlockwise, and push the CHARGE/ ON OFF direction stick toward right to turn it clockwise. Helicopter Transmitter USB Cable Instructions manual LIGHT L ST. TRIM R Precautions, Warnings & Statements The crossed-out dustbin symbol indicates that batteries, rechargeable batteries, Waste Electrical and Electronic Equipment (WEEE) button cells, battery packs, etc. must not be put in the household waste. Batteries When this appliance is out of use, please remove all batteries and dispose of them are harmful to health and the environment. Please help to protect the environment separately. Bring electrical appliances to the local collecting points for waste electrical from health risks. Tell your children to dispose of batteries properly by taking them to and electronic equipment. Other components can be disposed of in domestic refuse. the local collecting points. This way batteries are recycled safely. Safety precautions: Warning: Conversion or modifications to this product not expressly approved by the party responsible FCC Statements for compliance could void the user's authority to operate the product. This device complies with part 15 of the FCC rules. Operation is subject to the following two Forward and backward flight: - The transmitter-charger is tailor-made for the LiPo rechargeable battery used in helicopter. Do not use it conditions: Maintain the helicopter at a certain height. Push the direction stick upward to charge any battery other than that in the helicopter. 1)This device may not cause harmful interference, and 2)This device must accept any interference received, including interference that may cause LOW BATTERY (HELI COPTER) to fly the helicopter forward. Push it downward to fly the helicopter Care and Maintenance: undesired operation. CHARGE/ ON backward. - Always remove batteries from the product when it is not being used for a long period of NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable OFF time. (Transmitter only) - Regularly examine for damage to the plug, enclosure and other parts. In the event of any protection against harmful interference in a residential installat LIGHT damage, the product must not be used with the transmitter charger until the damage has However, there is no guarantee that interference will not occur in a particular installation. If this L ST. TRIM R been repaired. equipment does cause harmful interference to radio or television reception, which can be - Wipe the product gently with a clean cloth. determined by turning the equipment off and on, the user is enco: Forward Backward - Reorient or relocate the receiving antenna. - Keep the product away from direct heat. - Do not submerge the product into water that can damage the electronic assemblies. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Special notes: - Consult the dealer or an experienced radio/TV technician for help. - Please read the operation instructions carefully prior to the first use. 5. Helicopter headlight Tip! Safety hints - Press the headlight button once to switch the LED headlight on. Press the button again to switch the LED off. Battery warnings: - Non-rechargeable batteries are not to be recharged. - Never take apart or attempt to modify the product. This could damage the product. - Rechargeable batteries are to be removed before being charged. (Transmitter only) - Helicopter piloting requires specific skills and should be learned under direct - Rechargeable batteries are only to be charged under adult supervision. supervision of an experienced adult. Note: The red LED light on the helicopter will flash very slowly if the helicopter is out of control range. When it happened, - Different types of batteries or new and used batteries are not to be mixed. (Transmitter only) - Never operate this product if it has damaged parts. - Only batteries of the same or equivalent type as recommended are to be used. please restart of both helicopter and transmitter. - Batteries are to be inserted with correct polarity. - Attention! Do not fly the helicopter near persons and animals. - Exhausted batteries are to be removed from the product. (Transmitter only) - Do not fly the helicopter in the vicinity of water and power lines. - The supply terminals are not to be short-circuited. - Always keep your eyes on the helicopter and prevent it from landing or crashing - Do not mix old and new batteries. (Transmitter only) near your head, your body, or on other people. - Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. - Stand during operation in order to get out of the way of the helicopter quickly if Troubleshooting (Transmitter only) necessary. - Always switch the helicopter and the transmitter off when not operating. Symptom Cause Correction This helicopter is equipped with a LiPo rechargeable battery, - Warning! Do not touch the running rotors. Keep hands, hair and loose clothes away please pay attention to the following cautions for safety use: from moving parts to avoid injury. The helicopter does not response. - The helicopter and/ or the transmitter is switch off - Set the power switch to "ON" - Never hold or throw any objects into the running rotors. - Do not dispose the battery in fire or heat. - Attention! Risk of eye injuries! Keep a safety distance of at least 1 metre. ("OFF"). - Do not use or leave the battery near a heat source such as fire or heater. - Keep this instruction manual for future reference. - The battery of the helicopter is weak. - Recharge the battery of the helicopter. - Do not strike or throw the battery against hard surface. - Do not immerse the battery in water, and keep the battery in a cool dry environment. - When recharging, only use the battery charger specifically for that purpose. - Do not over-discharge the battery. The helicopter does not react, or react - PAIRING / SYNC Procedure is not yet completed - Reset by switch off both helicopter and transmitter - Do not connect the battery to an electrical outlet. Notes: poorly to operation by transmitter. or done. then switch both on again. - Do not directly solder the battery and pierce the battery with a nail or other sharp object. - Under the environment with electrostatic discharge, the product may malfunction and - Do not disassemble or alter the battery. require user to reset the product. - Charge the battery every 6 months. - New alkaline batteries are recommended to use in this product to obtain best and Loss of control. - Out of the control range of distance. - Ensure the antenna is fully extended. The - Do not transport or store the battery together with metal objects such as necklaces, hairpins etc. maximum performance. transmission range is up to 50 meters in open - As for a used battery, please recycle after covering the battery terminals with insulation tape or - This product must only be used with the recommended charger. space. inserting it to an individual poly-bag. - Tail rotor blade is deformed or distorted. - Replace the tail rotor blade with the spare one provided. Battery requirement for Transmitter: Battery requirement for Helicopter: Power Supply : Power Supply : Rating : DC 12 V , 3.84 W Rating : DC 3.7 V , 9.45 W Batteries : 8 x 1.5 V "AA"/LR6/AM3 (not included) Batteries : 1 x 3.7 V LiPo Relow Powerable Battery Pack (included) Capacity : 300 mAh Silverlit SAS, Espace Green Parc, Route de Villepecle, 91280 Saint Pierre du Perray / France. ©2012 Silverlit. All rights reserved. 2 ENGLISH ENGLISH 3 Part Identification Flying Your Helicopter Helicopter Stabiliser Tip! Piloting hints Tip! Operation hints Tail rotor - For controlling the sticks on transmitter, try not to push the sticks immediately any - If the helicopter is crashed, switched off the helicopter and the transmitter. extreme positions. It should be like steering a bicycle rather than pressing computer Examine the helicopter and ensure it has no damage before switching Main rotor blade Stabiliser linkage game sticks. them on again. - For the novice pilot (after the trimming procedure is completed), it is highly - Don’t operate the helicopter under the direct bright light it will affect the recommended to focus exclusively on learning to control the throttle stick first. If the control system of your helicopter. helicopter turns around by itself there is no need to keep it straight. For the first flight, - Don’t cover the IR diodes of the transmitter as it will block the IR signal. it is important to learn to keep the helicopter at a constant altitude of around 1 meter - Don’t stick any other label onto the helicopter as it will affect receiving of LED headlight with very gentle inputs on the throttle stick. Once the pilot masters this, he may start IR signal. Landing gear learning to take control with the direction stick. OFF/CHG Power switch Charging socket ON Procedure for PAIR / SYNC the Helicopter and Transmitting 2.4 GHz technology allows for many helicopters to run without signal interference. A connection, or pairing, must be made between the helicopter and the transmitter to function. Sometimes, the pairing will happen automatically. If it does not, or if the connection is lost then follow these steps to sync the Transmitter LOW BATTERY helicopter and the transmitter. (HELI COPTER) CHARGE/ ON 1. Place the helicopter on the ground with the tail point towards you and the nose pointing away. Make sure the throttle stick is at the minimum position. OFF LIGHT 2. Turn the Power Switch button to 'ON' position both on the Helicopter and Transmitter, Red LED will then flash. Power indicator Low Power indicator Minuimum throttle position L ST. TRIM R 3. The Synchronize/Pairing procedure is automatically COMPLETED when you can see the Red LED light up solid (not blinking) on both Helicopter and Transmitter. Power switch LOW BATTERY Throttle stick Direction stick (HELI COPTER) CHARGE/ ON 1. Flight Environment: OFF LIGHT Playing environment and weather condition: L ST. TRIM R Yaw trim button a) Indoors: in calm air. Avoid flying the helicopter near air circulation, air-conditioner and furnishings. Headlight button b) Outdoors: on a sunny day with calm air or slight breeze. Never fly the helicopter on a windy day. Charging plug c) It is recommended to fly the helicopter over a soft surface, e.g. grass field. d) Do not fly the helicopter when it is raining, snowing or near high power cables. Battery Compartment Cover 2. Trimming the helicopter: - Gently push the throttle up to raise your helicopter about 0.5 to 1 meter high. Battery Installation & Charging - When the helicopter spirals - When the helicopter spirals Transmitter Battery Installation (*Make sure the power switch is on "OFF" position.) (fig. 1) or keeps turning (fig. 4) or keeps turning clockwise (fig. 2), press the left anticlockwise (fig. 5), press side of the yaw trim button the right side of the yaw trim ("L") repeatedly until the button ("R") repeatedly until helicopter flies straight (fig. 3). the helicopter flies straight (fig. 6). fig. 1 fig. 4 Spiral clockwise Spiral anticlockwise 1. Open the battery compartment by loosening 2. Insert 8 AA batteries in the battery 3. Close the battery compartment. the two screws. compartment with correct polarity. Note: The transmitter receives a signal from the helicopter when the battery is low. When the Low Power indicator on the transmitter starts blinking, recharge the helicopter. Charging Helicopter fig. 2 fig. 3 fig. 5 fig. 6 LIGHT L ST. TRIM R Keep turning clockwise Keep turning anticlockwise LOW BATTERY OR (HELI COPTER) CHARGE/ ON OFF 3. Lift-off procedures (after trimming procedure): - Put the helicopter on a smooth surface. Uneven floor surface will affect its lifting off. - Slowly increase the throttle. LIGHT L ST. TRIM R - Do not look at the transmitter but focus on the helicopter. 1. Pull out the cover and take the charging plug from the transmitter or connect the USB cable to a 3. Switch on the transmitter. The charging - As soon as the helicopter leaves ground, reduce the throttle slightly. (In the worst case, USB socket. process will begin automatically and the helicopter will go back to the floor but that is better than crashing against the ceiling.) 2. Switch off the helicopter. Insert DC plug (circular) into the charging socket on the helicopter. charging indicator will light up. - Very gently add the throttle if the helicopter descends. Unplug the charging plug after the charging - Very gently reduce the throttle if the helicopter ascends. indicator turns off, charging is completed. - For turning, give short and small inputs to the direction stick. (Most beginners will easily Note: 1. The helicopter can operate for about 4 - 5 minutes per every 40 - 60 minutes charging. overcontrol the helicopter.) 2. Before recharging the battery, wait 10 - 15 minutes for it to cool down.


Document Created: 2012-04-03 12:20:40
Document Modified: 2012-04-03 12:20:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC