Users Manual

FCC ID: OXGAL69W

Users Manual

Download: PDF
FCCID_3831366

# 1034048 REMOTE CONTROL REMOTE CONTROL SAFETY INSTRUCTIONS FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT Remote Control Instructions If the remote control does not work, check battery. Safety Attention 1. Remove insulating tape from the battery compartment before use. 1. Turn off 30 minutes after working 6 hours to last the lifetime Show WARNING: This is not a toy and is not intended for use by children. FCC Caution: Changes or modifications not expressly approved White Color Color This remote is RF and receiving distance allowance is 8 meters. (A) Do not dispose of the battery in fire as the battery may leak of product. by the party responsible for compliance could void the user’ s 2. is to turn on/off. and explode. 2. This product is mainly used for outdoor with waterproof Ip65. authority to operate the equipment. (B) Do not mix old and new batteries and do not mix alkaline, It has excellent radiating ease. Put it far away from the flammable 3. Show is show mode. Show Note: This equipment has been tested and found to comply with standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. objects or liquids. the limits for a Class B digital device, pursuant to part 15 of the FCC White Color Color 4. White Color Color the buttons to change the color. (C) Exhausted batteries are to be removed from the product. 3. Please use show light laser projector power adapter to support the Rules. This device complies with Part 15 of the FCC Rules. Operation White the button to control the white laser. (D) Dispose of battery properly by following directions on battery. light. If you need to change a new adapter, please check the is subject to the following two conditions: Color switching color mode. (E) Use CR2025 battery only. Use of other batteries may damage parameter of our adapter before you buy a new one. (1) This device may not cause harmful interference, and Color automatic color mode circulation remote control. (F) Safe for indoor use. (2) this device must accept any interference received, including 5. Mode Switchover: Steady, flash. (G) Do not expose the Remote Control to moisture. CAUTION interference that may cause undesired operation. Multi-color laser light 1. Danger-laser radiation when open. These limits are designed to provide reasonable protection against 6. are buttons to control light moving mode. 2. Avoid direct exposure to beam. harmful interference in a residential installation. This equipment Seven color with movement There are four mode options: LASER PROJECTOR FUNCTION 3. Avoid direct eye exposure. generates, uses and can radiate radio frequency energy and, if not Instruction Manual STATIC, SLOW, FASTER and FASTEST. Button Mode 4. Laser radiation-do not stare into beam or view directly with installed and used in accordance with the instructions, may cause Motor Speed Down. 1. When turn on the laser and short press the button to MADE IN CHINA optical instruments. Motor Speed Up. switchover to cycle the 7 colors as bellow: harmful interference to radio communications. However, there is no Mode/ Power 5. The use of optical instruments with this product will increase . Red guarantee that interference will not occur in a particular installation. Scan & See Me! 7. Press the button , show light laser projector will flash thrice. eye hazard. . Green If this equipment does cause harmful interference to radio or www.ishowtree.com PRODUCT SPECIFICATION Reset Timer Function: 2h 4h 6h 8h 6. Use of controls or adjustments or performance of procedures Laser hole . Blue television reception, which can be determined by turning the Laser Classification: Class IIIa . White other than those specified herein may result in hazardous Press the button , show light laser projector will flash thrice Laser Wavelength: Red 635 nm, green 532 nm radiation exposure. equipment off and on, the user is encouraged to try to correct the - French: and timer function is canceled. . Yellow Power: UL & CUL Adapter 12V, 2A interference by one or more of the following measures: - Reorient or Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux . Purple LASER RADIATION, Please only use manufacture Operation: Indoor/Outdoor Battery installation: appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions AVOID DIRECT EYE EXPOSURE, Holder 1. Connect the power adapter to the laser light projector. . Azure relocate the receiving antenna. - Increase the separation between the DO NOT STARE INTO BEAM OR VIEW provided power supply Operating Temperature: -15°F to 90°F 1. Slide battery cover off. IMPORTANT! suivantes: DIRECTLY WITH OPTICAL INSTRUMENTS, （-26°C to 32°C） The adapter input voltage is AC120V. 2. Press and hold the button to turn off under working equipment and receiver. - Connect the equipment into an outlet on CALSS IIIa LASER PRODUCT Built-in timer function: 2. Insert a "CR2025" (3 volt) battery. status. (1) l'appareil ne doit pas produire de brouillage, et MAX OUTPUT<5 mW Projection Coverage: 30 ft x 30 ft Do not point the show light laser projector to the airplane or up WAVELENGTHS 532-650 NM 6h ON / 18h OFF 2. Press the button to switch mode/turn on a circuit different from that to which the receiver is connected. (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi Dimensions: 22.5 in x 5.75 in x 5.75 in 3. Short press the button to turn on under power off in the sky. 3. Press and hold the button to turn off. function, would recover to the mode before powor - Consult the dealer or an experienced radio/ TV technician for help. le brouillageest susceptible d'encompromettre le fonctionnement. Cord Length: 3 ft Ground Stake Version: 2018 Made in china Warranty: One Year Limited 4. Built-in timer function: 2h / 4h / 6h / 8h off stake. 11


Document Created: 2018-04-20 09:36:28
Document Modified: 2018-04-20 09:36:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC