Manual

FCC ID: OWS-NIC411-3C

Users Manual

Download: PDF
FCCID_2105482

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling Product Requirements Silver Spring Networks 555 Broadway Street Redwood City, CA 94063 www.silverspringnet.com MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 1

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling Confidential Information of Silver Spring Networks, Inc., provided under nondisclosure obligations. Copyright © 2013 Silver Spring Networks, Inc. All rights reserved. The Silver Spring Networks logo, UtilityIQ®, and UtilOS® are registered trademarks of Silver Spring Networks, Inc. GridScape™, CustomerIQ™, and Direct-to-Grid™ are trademarks of Silver Spring Networks, Inc. All other company and product names are used for identification purposes only and may be registered trademarks, trademarks, or service marks of their respective owners. Please consider the environment before printing this document. Customer Support Telephone Hours Email Toll free within the US and Canada: 5:00 AM - 6:00 PM support@silverspringnet.com 1-888-SSN-9876 US Pacific Time (1-888-776-9876) Non-toll-free: 1-650-298-4298 In Australia: 9:00 AM - 9:00 PM aus-support@silverspringnet.com 1300 706 769 Australia Eastern Time Contact us on the Web: http://www.silverspringnet.com/services/customer-support/ MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 2

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling Contents Contents 1. About the NIC 411-3G and 411-3C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Meter Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Meter Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Meter Auxiliary Label or NIC Address Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 NIC Labeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. FCC and Government Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FCC Guidelines for Devices Containing a Transmitter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Industry Canada Guidelines for Devices Containing a Transmitter Module . . . . . . . . . . . . . . . . . . . . 12 411-3G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 411-3C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 General Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Personal Protective Equipment (PPE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Fall Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Shock Accident First Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 3

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C 1 About the NIC 411-3G and 411-3C MicroAP (NIC 411‐3G or NIC 411‐3C) is a WAN‐enabled Network Interface Card (NIC) enabling Micromesh™ technology. MicroAP is an FCC Part 15.247‐compliant device that enables machine‐to‐machine communication over 900 MHz and 2.4 GHz and transmits data over 3G GSM or CDMA cellular backhaul to the utility or network provider. MicroAP also incorporates an 802.15.4‐compliant ZigBee® radio for Home Area Networking (HAN). NIC 411‐3G is the GSM version and NIC‐411‐3C is the CDMA version. Figure 1. 411-3G NIC and meter References Guidelines for 64‐bit Global Identifier (EUI‐64™) Registration Authority, IEEE Standards Association. Specifications The hardware specifications for 411‐3G and 411‐3C are listed in Table 1. Table 1. Micro AP specifications Feature Description 900-MHz NAN Transceiver: Frequency range 902-928 MHz North America  902-907.5, 915-928 MHz Brazil Data rate Up to 300 Kbps MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 4

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C Table 1. Micro AP specifications (Continued) Feature Description Spread Spectrum technology Frequency Hopping Transmitter output Up to 1W Receiver sensitivity -98 dBm for 10% PER @ 100 kbps 2.4-GHz Communications: Frequency range 2.4 GHz, ISM Band Data rate Up to 500 kbps Spreading technique FHSS Transmitter output Up to 500mW Receiver sensitivity -94 dBm @ 10% PER 2.4-GHz HAN Transceiver: Frequency range 2.4 GHz, ISM Band Data rate 250 kbps Spreading technique Direct Sequence MAC/Channels 802.15.4/ 16 Transmitter output Up to 200mW Receiver sensitivity -94 dBm @ 10% PER NAN Network: Addressing 8 byte MAC Address Protocol UDP/IPv6 Confidentiality AES-256 Encryption Authentication ECDSA & RSA Signatures HAN Network: Protocols ZigBee Pro Device Types Network Coordinator/End Device Profile SmartEnergy Profile 1.1 WAN Transceiver (GSM Version): Frequency Ranges UMTS 800/850 Band VI/V, UMTS 900 Band VIII, UMTS 1800 Band III, UMTS 1900 Band II, UMTS 2100 Band I Transmitter Output Up to 2W (per specification) Modes 3G UMTS/HSPA+ Rel 6/7, GSM/GPRS/EDGE Rel 99/4 Modes 2G GSM/GPRS/EDGE Rel 99 WAN Transceiver (CDMA Version): Frequency Ranges Dual band (BC0/BC1), 800/1900 MHz Transmitter Output Transmitter Output: Up to 300 mW MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 5

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C Table 1. Micro AP specifications (Continued) Feature Description Environmental: Operating Temperature (the -40°C to +85°C ambient temperature at the NIC) Humidity 95%, non-condensing Interfaces: Meter ANSI (LVTTL Levels) DLMS/COSEM Physical: Size 108.20 x 46.99 x 14.22 (mm) Weight 39 Gram Meter Labeling Meter Nameplate The meter nameplate shall not contain information pertaining to the Silver Spring Networks radio. Figure 2. Example of meter nameplate label Meter Auxiliary Label or NIC Address Label For radio identification, the meter shall have an auxiliary label containing the Silver Spring Networks NIC address presented in text (16 alphanumeric digits) and bar code formats. • Bar Code Type = Code 3 of 9 • Bar Code Font Size = unknown • Font Type = unknown • Font Size = unknown • Bar Code Label Dimensions = 1.50ʺ x 0.25ʺ • Bar Code Material Type = Static Dissipative Polyimide MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 6

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C Figure 3 shows an example of the NIC address label, which is consistent with FCC requirements set forth in section 4.1, and contains the Silver Spring Networks corporate name and NIC EUI‐64 address. Figure 3. Example of NIC address label for 411-3G Silver Spring Networks 1234567890123456 Contains: FCC ID: OWS-NIC411-3G IC: 5975A-NIC4113G IMEI: 01383900ZZZZZZA Figure 4. Example of NIC address label for 411-3C Silver Spring Networks 1234567890123456 Contains: FCC ID: OWS-NIC411-3C IC: 5975A-NIC4113C MEID: RRXXXXXXZZZZZZC The NIC address label shall be placed on the meter nameplate in the location identified by “Label A” in the following figure. Figure 5. Nameplate NIC address locations MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 7

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C NIC Labeling The Silver Spring Networks NIC 411‐3G or 411‐3C has two labels relevant to meter final assembly and RMA: the FCC and Part Number label and the Silver Spring NIC address label. Both labels are located on the bottom side of the NIC PCA. The FCC ID label is 1ʺ x .375ʺ inches (2.5 x 1 cm). Figure 6 shows an example of the FCC ID label found on the NIC 411‐3G or 411‐3C. Figure 8 shows an example of the Silver Spring NIC address label.. Figure 6. Sample FCC ID label for MicroAP NIC 411-3G PCA Catalog: 343-012345 NIC 411-3G-070B FCC ID: OWS-NIC411-3G IC: 5975A-NIC4113G Figure 7. Sample FCC ID label for MicroAP NIC 411-3C PCA Catalog: 343-012345 NIC 411-3C-070B FCC ID: OWS-NIC411-3C IC: 5975A-NIC4113C Figure 8. Silver Spring NIC 411-3G address label example XXX-XXXX-XX Rev XX MAC: XXXXXXXXXXXXXXXX IMEI: XXXXXXXXXXXXXXX Figure 9. Silver Spring NIC 411-3C address label example XXX-XXXX-XX Rev XX MAC: XXXXXXXXXXXXXXXX MEID XXXXXXXXXXXXXXX MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 8

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 1 About the NIC 411-3G and 411-3C Figure 10 shows the placement of the labels. The QR code label contains the same information as the Silver Spring NIC address label. Figure 10. Label locations on NIC 411-3G QR code Catalog number Model number Silver Spring  FCC ID part number IC Certification MAC address IMEI code Figure 11. Label locations on NIC 411-3C Catalog QR code number Model number Silver Spring  FCC ID part number IC Certification MAC address MEID code MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 9

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines 2 FCC and Government Guidelines GSM version: Spring Networks MicroAP (3G GSM) NIC FCC ID: OWS-NIC411-3G IC Certification Number: 5975A-NIC4113G CDMA version: Silver Spring Networks MicroAP (CDMA-2000) NIC FCC ID: OWS-NIC411-3C IC Certification Number: 5975A-NIC4113C Table 2. MicroAP NICs Model Number Descriptions NIC 411-3G-070B MicroAP with 3G GSM cellular module, internal/external NAN antenna and internal cell antenna NIC 411-3G-0713 MicroAP with 3G GSM cellular module, internal/external NAN antenna and external cell antenna NIC 411-3G-070A MicroAP with 3G GSM cellular module, external NAN antenna and internal cell antenna NIC 411-3G-0712 MicroAP with 3G GSM cellular module, external NAN antenna and external cell antenna NIC 411-3C-070B MicroAP with CDMA-2000 cellular module, internal/external NAN antenna and internal cell antenna NIC 411-3C-0713 MicroAP with CDMA-2000 cellular module, internal/external NAN antenna and external cell antenna NIC 411-3C-070A MicroAP with CDMA-2000 cellular module, external NAN antenna and internal cell antenna NIC 411-3C-0712 MicroAP with CDMA-2000 cellular module, external NAN antenna and external cell antenna Requirements The MicroAP (NIC 411‐3G and 411‐3C) is REQUIRED to be professionally installed by a properly trained technician. Improper installation could void the userʹs authority to operate the equipment. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. The device may not cause harmful interference. MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 10

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines 2. The device must accept any interference received, including interference that may cause undesired operation. The antenna of this transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. The device should be installed so that people will not come within 20 cm (8 in.) of the antenna. This equipment has been tested and found to comply with Part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver disconnected. • Consult the dealer or an experienced radio/TV technician for help. FCC Guidelines for Devices Containing a Transmitter Module The following is an extract from FCC PART 15 UNLICENSED MODULAR TRANSMITTER APPROVAL, DA 00‐1407, Released: June 26, 2000, Section 6 describing labeling requirements for devices containing a modular transmitter. Section 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Figure 12. Sample FCC ID label for devices containing a MicroAP (NIC 411-3G) Contains: FCC ID: OWS-NIC411-3G IC: 5975A-NIC4113G IMEI: 01383900ZZZZZZA MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 11

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines Figure 13. Sample FCC ID label for devices containing a MicroAP (NIC 411-3C) Contains: FCC ID: OWS-NIC411-3C IC: 5975A-NIC4113C MEID: RRXXXXXXZZZZZZC Industry Canada Guidelines for Devices Containing a Transmitter Module NIC 411-3G External Antenna Integration This radio transmitter 5975A‐NIC4113G has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. • Omnidirectional antennas: 3 dBi at 900 MHz, 4 dBi at 2.4 GHz Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle sʹil fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types dʹantenne énumérés ci‐dessous et ayant un gain admissible maximal et lʹimpédance requise pour chaque type dʹantenne. Les types dʹantenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour lʹexploitation de lʹémetteur. • Antennes omnidirectionnelles: 3 dBi à 900 MHz, 4 dBi à 2,4 GHz Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation dʹIndustrie Canada, le présent émetteur radio peut fonctionner avec une antenne dʹun type et dʹun gain maximal (ou inférieur) approuvé pour lʹémetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à lʹintention des autres utilisateurs, il faut choisir le type dʹantenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas lʹintensité nécessaire à lʹétablissement dʹune communication satisfaisante. For Transmitters Not Requiring Licenses This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 12

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR dʹIndustrie Canada applicables aux appareils radio exempts de licence. Lʹexploitation est autorisée aux deux conditions suivantes : (1) lʹappareil ne doit pas produire de brouillage, et (2) lʹutilisateur de lʹappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible dʹen compromettre le fonctionnement. NIC 411-3C External Antenna Integration This radio transmitter 5975A‐NIC4113C has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. • Omnidirectional antennas: 3 dBi at 900 MHz, 4 dBi at 2.4 GHz Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle sʹil fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types dʹantenne énumérés ci‐dessous et ayant un gain admissible maximal et lʹimpédance requise pour chaque type dʹantenne. Les types dʹantenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour lʹexploitation de lʹémetteur. • Antennes omnidirectionnelles: 3 dBi à 900 MHz, 4 dBi à 2,4 GHz Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation dʹIndustrie Canada, le présent émetteur radio peut fonctionner avec une antenne dʹun type et dʹun gain maximal (ou inférieur) approuvé pour lʹémetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à lʹintention des autres utilisateurs, il faut choisir le type dʹantenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas lʹintensité nécessaire à lʹétablissement dʹune communication satisfaisante. For Transmitters Not Requiring Licenses This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR dʹIndustrie Canada applicables aux appareils radio exempts de licence. Lʹexploitation est autorisée aux deux conditions suivantes : (1) lʹappareil ne doit pas produire de brouillage, et (2) lʹutilisateur de lʹappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible dʹen compromettre le fonctionnement. MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 13

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines Safety Information WARNING: Severe shock and explosion hazard! Touching energized parts can result in massive equipment damage, and severe injury or death. Short-circuiting energized parts will result in blinding flash and explosion. Opening and closing electrical circuits can also produce dangerous and explosive arc flashes. Involuntary muscular reactions associated with electrical shock may result in other injuries. Observe the following safety guidelines. Careful planning of every job is essential. Nothing should be taken for granted. Do not take chances! • Read and follow all approved policies and procedures provided by your employer associated with the procedures in this manual. • The procedures in this manual must only be performed by qualified workers in accordance with local utility safety practices, utility requirements, and applicable OSHA and NFPA standards. • The information contained in this document is intended to aid qualified personnel, and is not a replacement for the proper training required to make a person qualified. • Silver Spring Networks assumes no liability for the customerʹs failure to follow these safety guidelines. General Electrical Safety • Perform the procedures in this manual in accordance with applicable workplace standards established by the following agencies: — Occupational Safety and Health Act (OSHA). — The National Electrical Code published by the National Fire Protection Association (NFPA‐70). — National Electrical Manufacturers Association (NEMA). — Electronics Industries Association (EIA). — Insulated Power Cable Engineers Association (IPCEA). • American National Standards Institute (ANSI). Whenever possible, de‐energize all circuits or equipment before working on them. • Maintain a minimum clearance of 10 feet (3 meters) between line potential and all unqualified persons at all times. • Keep unauthorized people out of the work area. Be especially cautious of children, who tend to be drawn to work activity. • Determining if a circuit is OFF can be difficult in some instances. Check for circuit voltage with an appropriate voltmeter before working on equipment presumed to have been de‐energized. Tiebreakers, double throw disconnect switches, automatic transfer switches and emergency generators can supply power through an alternate circuit or from another source. MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 14

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines • 120V current can be just a lethal as higher voltages because current flow through a body depends upon the bodyʹs resistance. • Do not trust insulation and/or weatherproofing on a wire as protection from shock. • Use electrically insulated tools. Inspect portable electrical equipment or tools for defects and remove any defective devices from service immediately. All portable electrical equipment must have Ground Fault Circuit Interrupter (GFCI) protection. • Select the right tool for the job. Use tools properly. Keep tools in good working order. • Make sure the work area is free of any flammable material. Flammable vapors can be ignited by an arc flash. • Keep the work area clean and dry. Cluttered work areas cause accidents and injuries. • Provide good lighting in the work area. You cannot work safely if you cannot see what you are doing. • Report unsafe conditions or defective equipment to your immediate supervisor. • Handle material carefully. Lift and carry properly. Personal Protective Equipment (PPE) • Always wear Personal Protective Equipment (PPE), in accordance with OSHA and ANSI standards. • Wear eye protection and electrically insulated gloves. Test gloves in accordance with ANSI standards before use. Do not use gloves that do not pass appropriate test procedures. • Wear protective clothing such as long sleeve shirts and long pants made of flame resistant materials. • Remove all jewelry. • Do not pass any objects to or from other persons not protected by insulating platforms or tested, electrically insulated gloves. Fall Protection When performing work at any elevation: • Always use a fall protection system, in accordance with OSHA standards, whenever performing work at any elevation. • Never use conductors, guy wires, pins, or cross‐arm braces, etc. to support your weight. • Whenever using aerial lift devices such as hoists, man‐lifts, vehicle‐mounted work platforms and overhead lifts, read and follow the manufacturerʹs guidelines for safe and proper operation. • Use ladders and scaffolding only in accordance with the manufacturerʹs guidelines and/or according to OSHA standards. • Only use ladders made of non‐metallic, non‐conductive material. They should be the proper size and type for the work intended. Inspect ladders for wear and breakage. Remove any oil, grease, or other slippery materials. MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 15

MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 2 FCC and Government Guidelines • Do not set the ladder at too steep or too shallow of an angle. A rule of thumb is to stand erect with your toes against the bottom rails of the ladder, with your arms extended straight out. If you can set your palms on top of the rung that is at eye level, the ladder should be at the proper angle. If a ladder angle label is provided, follow its recommendations. • If the ladder is to remain in place for an extended period, secure it at the top. The support point at the top of the ladder should be at least 24 inches (60 centimeters) wide to maintain support in the event of sideways movement. For jobs of short duration, have a fellow worker support the ladder at the base. • Evaluate all tasks to be performed from a ladder for potential fall hazards, such as complex tasks or situations that require leaning from the side of the ladder. • The use of scaffolding or a work platform should be considered as an alternative solution in such cases. Shock Accident First Aid • Do not touch the victim with your bare hands; use something non‐conductive to separate the victim from the energy source. • Call for emergency medical help immediately. Keep the victim lying down, warm, and comfortable until help arrives. Avoid moving the victim in case of injury to neck or back. Position an unconscious victim on a side to let fluids drain. • Check the victimʹs breathing and heartbeat. If properly trained, apply mouth‐to‐mouth resuscitation and/or CPR if necessary. • Remove constricting items from the victim, such as shoes, belts, jewelry, and tight collars; they could cut off circulation if the victim experiences swelling. • Apply water or saline for a few minutes to any burns until the skin returns to normal temperature. Do not attempt to remove clothing that is stuck to a burn. If possible, elevate burned areas to reduce swelling. • Make sure the victim receives professional medical attention, even if they feel fine. Electric shock can cause heart failure hours after the shock is received. MicroAP (NIC 411-3G and 411-3C) and Meter Labeling 7 August 2013 Silver Spring Networks 16


Document Created: 2013-08-07 11:16:01
Document Modified: 2013-08-07 11:16:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC