Modular Approval Letter

FCC ID: OWS-MIL51

Attestation Statements

Download: PDF
FCCID_3405433

Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Silver Spring Networks FCC ID: OWS-MIL51 Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v01r04’. FCC ID: OWS-MIL51 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee ‘Modular Certification Guide v01r04 (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be A stainless steel shield completely covers the module including radio elements. located external to the shield, but must be on the module assembly The module must have buffered modulation/data inputs to ensure The Milli 5 does not have any external that the device will comply with Part 15 requirements with any modulation inputs. type of input signal Power supply regulation must be supplied The module must contain power supply regulation on the module by host device and must follow guidelines specified in User Manual. The module must contain a permanently attached antenna, or The module does not contain a permanently contain a unique antenna connector, and be marketed and attached antenna, nor a unique antenna operated only with specific antenna(s), per Sections 15.203, connector. 50 ohm PCB Design guidelines 15.204(b), 15.204(c), 15.212(a), 2.929(b) are provided within the User Manual. The module was tested on LNIC (SSN PN 170-0818-00) that provides circuitry The module must demonstrate compliance in a stand-alone representative of a typical host system. configuration LNIC includes regulated power, buffered data inputs, a 50 ohm co-planar waveguide and integral antenna. The module must be labelled with its permanently affixed FCC ID FCC ID label is present on the module. label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The module complies with all the The module must comply with all specific rules applicable to the requirements of §15.212(a)(1) modular rules transmitter including all the conditions provided in the integration only when constrained to specific operating instructions by the grantee host(s) as specified in the User Manual. Please refer to the MPE test report. Max The module must comply with RF exposure requirements gain antenna allowed on this device is 0 dBi. Silver Spring Networks, Inc. • 230 West Tasman Drive • San Jose, California 95134 • T +1 669 770 4000 • ssni.com

Name: Asim Tirmizi Date: May 23, 2017 Title: Manager HWQA Signature of applicant Silver Spring Networks, Inc. • 230 West Tasman Drive • San Jose, California 95134 • T +1 669 770 4000 • ssni.com


Document Created: 0640-07-03 00:00:00
Document Modified: 0640-07-03 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC