KBD response

FCC ID: OWS-IMU516

Cover Letter(s)

Download: PDF
FCCID_1459801

From: oetech@fccsun27w.fcc.gov Subject: Response to Inquiry to FCC (Tracking Number 858255) Date: April 15, 2011 7:27:51 AM PDT To: tom@tncokenias.org FCC Home | Search | RSS | Updates | E-Filing | Initiatives | Consumers | Find People Office of Engineering and Technology Inquiry: Refer to the attached document for details. The manufacturer would like to use the same label for both the board alone and the board in the plastic box. The plastic box label will be on the exterior surface and will be visible after installation. In other words, the manufacturer would like to save the expense of placing a ?Contains FCC ID:? label on the plastic box. Question1: If the information regarding the plastic box and how it is labeled is documented in the certification filing, can we use the same FCC ID for both the board alone and the board in the plastic box? Question2: If the answer to question 1 is ?Yes?, can the ?Contains FCC ID:? label be eliminated if the FCC ID label is clearly visible after installation? Response: In response to your inquiries: Question1: If the information regarding the plastic box and how it is labeled is documented in the certification filing, can we use the same FCC ID for both the board alone and the board in the plastic box? Yes, but the wording "Contains FCCID:" must be on the plastic box. Question2: If the answer to question 1 is ?Yes?, can the ?Contains FCC ID:? label be eliminated if the FCC ID label is clearly visible after installation? Only if it's in a user accessible location. Do not reply to this message. Please select the Reply to an Inquiry Response link from the OET Inquiry System to add any additional information pertaining to this inquiry.


Document Created: 2011-04-24 22:23:29
Document Modified: 2011-04-24 22:23:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC