Spec sheet for meter

FCC ID: OWS-925

Operational Description

Download: PDF
FCCID_138185

ReFLEX® 50 Hardware Specifications General Specifications ITEM SPECIFICATION 22 pin connector Keyed Male 2mm pitch header, Molex Mini-Grid 87332-2220, used for power, ground, serial communications, parallel I/O, A/D and backup transmit power source 8 pin JTAG connector Keyed Male 2mm pitch header, Molex Mini-Grid 87332-0820 Coding Format Operating Temperature ReFLEX 50 -40˚ to +85˚ C CreataLink® Power Supply Requirements Main Supply 5-12Vdc, 1.4A minimum, 100mV p-p up to 5MHZ ripple and 2A maximum if sourcing current on output pins Wireless Power Backup/Transmit Supply Backup: 3-9Vdc Transmit: 5-9Vdc, 1.4A maximum, 100mV p-p up to 5 Products: MHZ ripple Serial Port Specifications RS232 compliant or TTL compliant via designated connector pinouts Parallel Port Specifications Outputs: Open collector or TTL compliant via designated connector pinouts More Than A/D Port Specifications Voltage range: 0-2.5V Resolution: 10 bit S/N Ratio: 58dB Hardware. Ref voltage: 2.5V internal reference Physical Dimensions (Board Level Device) Length 3.75 inches Width 1.75 inches Thickness (w/o standoffs) 0.70 Antenna External female SMA connector Transmitter Ideaware. Specifications ITEM SPECIFICATION Frequency 896-902 MHz RF Power Output (at antenna port) 0.5-2.0 Watts Transmit Data Bit Rate 9600 bps Frequency Stability 1 ppm on transmit Power Consumption OPERATING MODE CURRENT DRAIN (TYPICAL) Standby 3-4 mA Receive 85 mA Transmit 1.2A BLK Receiver Specifications ITEM SPECIFICATION YEL Frequency 929-942 MHz Receive Data Bit Rate 6400 bps MAG ® CreataLink Wireless CreataLink 2XT two-way transceivers are more than a simple alternative, they’re an innovative alternative. Our Products. advanced technology offers you an inexpensive, fast, easy way to create the designs you’ve always dreamed about. CYAN More Than Hardware. MOTOROLA, the Stylized M Logo, CreataLink, DigitalDNA, the Digital DNA logo, FLEX and all other trademarks indicated as such herein are trademarks or registered trademarks of Motorola, Inc. All other product or service names are the property of their respective owners. ®Reg. U.S. Pat & Tm. Off. ©2000 Motorola, Inc. All Ideaware. rights reserved. Printed in the U.S.A. Part Number 00649SPS FINAL SIGNED Creatalink Spec Sheet 25-50 APPROVAL: ___________________________________ 5-23-00 12PM

CreataLink 2XT Two-Way Transceiver Features: • FLEX Technology, a cost-effective, wireless medium for moving moderate amounts of ReFLEX® 25 data is utilized. Performs all necessary ReFLEX protocol processing to: – Maintain connection to the ReFLEX paging network Hardware Specifications – Receive and acknowledge messages accurately CreataLink 2XT two-way transceivers – Deliver messages in a manner that complies with protocol requirements General Specifications ITEM SPECIFICATION enable low-cost wireless data • Can automatically receive updates, notifications and important information almost 22 pin connector Keyed Male 2mm pitch header, Molex Mini-Grid 87332-2220, used for communication over a ReFLEX® anywhere with Motorola’s Timeport™, Talkabout® and V. Series™ messaging power, ground, serial communications, parallel I/O, A/D and backup products or through the internet. transmit power source paging network. They can: 8 pin JTAG connector Keyed Male 2mm pitch header, Molex Mini-Grid 87332-0820 • Broadcast group and individual outbound messaging supported. Coding Format ReFLEX 25 • Robust Temperature Specification: -40º to +85º C. Operating Temperature -40˚ to +85˚ C • Initiate message transmissions as well as • Confirmed Message Delivery supports up to 2,000 bytes of data per transmission. Power Supply Requirements 5-16Vdc, 1.4A minimum, 100mV p-p up to 5MHZ ripple and 2A maximum if decode, store and forward messages to an Main Supply sourcing current on output pins interconnected host device. • CLP (Communication Linking Protocol) allows for easy interfacing to other devices via Power Backup/Transmit Supply Backup: 3-9Vdc Transmit: 5-9Vdc, 1.4A maximum, 100mV p-p up to 5 MHZ a standard RS232 or TTL serial interface with connector. ripple • Meet the needs of Original Equipment • For 3rd party embedded applications, 40K of flash program memory and 32K+ of RAM Serial Port Specifications RS232 compliant or TTL compliant via designated connector pinouts Manufacturers (OEM) fixed telemetry and other storage are provided along with source level debugging tools. A total of 96K of flash Parallel Port Specifications Outputs: Open collector or TTL compliant via designated connector applications requiring moderate message length program memory is available with ReFLEX 25. pinouts wireless data communication. • Adjustable transmitter power range from 0.25W to 2W for system balancing. A/D Port Specifications Voltage range: 0-2.5V Resolution: 10 bit S/N Ratio: 58dB Minimum transmitter power for ReFLEX 25 is 0.25W and for ReFLEX 50 is 0.5W. Ref voltage: 2.5V internal reference • Execute a 3rd party embedded application. Physical Dimensions (Board Level Device) Length 3.75 inches Width 1.75 inches • Eight individually configurable bi-directional I/O signals: Thickness (w/o standoffs) 0.70 – Allow control and monitoring of discrete signals Antenna External female SMA connector – Enable the status to be routed over the serial port for external processing or internally processed by a 3rd party application ® CreataLink • Coasting up to 1º C per minute ambient temperature change, bare board without Transmitter Specifications housing.* ITEM SPECIFICATION Wireless • Interrupt driven parallel inputs for pulse counting & timing measurements.* Frequency 896-902 MHz RF Power Output (at antenna port) 0.25-2.0 Watts Products: Transmit Data Bit Rate 800, 1600, 6400, 9600 bps Motorola Developer's Kit Contents: Frequency Stability 1 ppm on transmit Hardware More Than Hardware. Power Consumption OPERATING MODE CURRENT DRAIN (TYPICAL) (5 Volt Supply / 16 Volt Supply) • CreataLink 2XT two-way transceiver • "Lab Development" board Standby 4-5 mA/1.5-2.5 mA • Interconnect cables Receive 80 mA/30 mA Ideaware. • Flat patch antennae and 6' cable Transmit 1.1A/0.5A BLK Software & Documentation Receiver • CLP (Communication Linking Protocol) Serial Interface Manual Specifications ITEM SPECIFICATION YEL • Software Integrators Guide and Software diskette for on board application Frequency 929-942 MHz • Hardware Integrators Guide and CLP diskette Receive Data Bit Rate 1600, 3200, 6400 bps • Programming Guide and Software diskette MAG * Only available in R25 modules. See specifications for details on R25 and R50 availability. CYAN FINAL SIGNED Creatalink Spec Sheet 25-50 APPROVAL: ___________________________________ 5-23-00 12PM


Document Created: 2000-05-23 17:27:01
Document Modified: 2000-05-23 17:27:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC