SAR A

FCC ID: OVF-K33BIC01

RF Exposure Info

Download: PDF
FCCID_1048553

FCC ID: OVF-K33BiC01 Appendix A: Validation Test Plots Validation Test Plots Page 1 of 3 Model: K33BiC-01

FCC ID: OVF-K33BiC01 Date: 12/8/2008 Test Laboratory: Kyocera-Wireless Corp. 1900Mhz Validation @ 20dBm Probe 1664, DAE 602 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: HSL1900,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.45 mho/m; εr = 39.1; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1664, ConvF(5.08, 5.08, 5.08), Calibrated: 6/23/2008 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn602,Calibrated: 6/25/2008 Measurement SW: DASY4, V4.7 Build 71 Postprocessing SW: SEMCAD, V1.8 Build 176 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.3 V/m; Power Drift = 0.026 dB Peak SAR (extrapolated) = 7.65 W/kg SAR(1 g) = 4.13 mW/g; SAR(10 g) = 2.13 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 4.64 mW/g 0 dB = 4.64mW/g Validation Test Plots Page 2 of 3 Model: K33BiC-01

FCC ID: OVF-K33BiC01 Date: 12/8/2008 Test Laboratory: Kyocera-Wireless Corp. 1900Mhz Validation (In Muscle) @ 20dBm Probe 1664, DAE 602 and Dipole 5d016 Communication System: CW, Frequency: 1900 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1900 MHz; σ = 1.52 mho/m; εr = 52.3; ρ = 1000 kg/m3 Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1664, ConvF(4.44, 4.44, 4.44), Calibrated: 6/23/2008 Sensor-Surface: 4mm (Mechanical And Optical Surface Detection), Electronics: DAE4 Sn602,Calibrated: 6/25/2008 Measurement SW: DASY4, V4.7 Build 71 Postprocessing SW: SEMCAD, V1.8 Build 176 Temperature: Room T = 21.8 +/− 1 deg C, Liquid T = 22.0 +/− 1 deg C 1900MHz Validation @20dBm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.9 V/m; Power Drift = 0.027 dB Peak SAR (extrapolated) = 7.61 W/kg SAR(1 g) = 4.2 mW/g; SAR(10 g) = 2.21 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 4.67 mW/g 0 dB = 4.67mW/g Validation Test Plots Page 3 of 3 Model: K33BiC-01


Document Created: 2008-12-13 14:29:59
Document Modified: 2008-12-13 14:29:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC