T Coil Plots

FCC ID: OVF-K33BIC01

Test Report

Download: PDF
FCCID_1048551

FCC ID: OVF-K33BIC01 EXHIBIT 13: APPENDIX D HAC T-Coil Data Plots Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -6.02 dB A/m BWC Factor = 0.0155338 dB Location: 5, -4, 363.7 mm Scans CH25/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH25/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -6.03 dB A/m ABM1 comp = -8.81 dB A/m BWC Factor = 0.0155338 dB BWC Factor = 0.015794 dB Location: 4.2, -3.4, 363.7 mm Location: 9, -1, 363.7 mm Point meas,TCoil on CH25/z (axial) at max z/ABM Point meas,TCoil on CH25/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -40.1 dB A/m ABM1/ABM2 = 31.3 dB Location: 9, -1, 363.7 mm BWC Factor = 0.015794 dB Location: 9, -1, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m Kyocera Wireless Corp. Page 1 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 X RADIAL MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH25/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.9 dB A/m ABM1 comp = -12.5 dB A/m BWC Factor = 0.0155338 dB BWC Factor = 0.015794 dB Location: -3, 2.6, 363.7 mm Location: -3, -5, 363.7 mm Point meas,TCoil on CH25/x (longitudinal) at max Point meas,TCoil on CH25/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -25.4 dB A/m ABM1/ABM2 = 12.9 dB Location: -3, -5, 363.7 mm BWC Factor = 0.015794 dB Location: -3, -5, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 2 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 Y RADIAL MEASUREMENT: CDMA 1900 Channel 25 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1850 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH25/y (transversal) 16 x 24/ABM Point meas,TCoil on CH25/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.1 dB A/m ABM1 comp = -17.8 dB A/m BWC Factor = 0.0155338 dB BWC Factor = 0.015794 dB Location: 4.6, -9.4, 363.7 mm Location: 1, -5, 363.7 mm Point meas,TCoil on CH25/y (transversal) at max Point meas,TCoil on CH25/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -41.8 dB A/m ABM1/ABM2 = 24.0 dB Location: 1, -5, 363.7 mm BWC Factor = 0.015794 dB Location: 1, -5, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 3 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -8.35 dB A/m BWC Factor = 0.015794 dB Location: 5, -3, 363.7 mm Scans CH600/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH600/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -7.05 dB A/m ABM1 comp = -11.0 dB A/m BWC Factor = 0.015794 dB BWC Factor = 0.0152737 dB Location: 2.6, -0.6, 363.7 mm Location: 9, -1, 363.7 mm Point meas,TCoil on CH600/z (axial) at max z/ABM Point meas,TCoil on CH600/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -42.4 dB A/m ABM1/ABM2 = 31.3 dB Location: 9, -1, 363.7 mm BWC Factor = 0.0152737 dB Location: 9, -1, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m Kyocera Wireless Corp. Page 4 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 X RADIAL MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH600/x (longitudinal) at max Interpolated Signal(x,y,z) (61x41x1): x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -15.8 dB A/m ABM1 comp = -14.8 dB A/m BWC Factor = 0.015794 dB BWC Factor = 0.0152737 dB Location: 9.8, -2.2, 363.7 mm Location: -3, -9, 363.7 mm Point meas,TCoil on CH600/x (longitudinal) at max Point meas,TCoil on CH600/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm ABM2 = -28.6 dB A/m Cursor: Location: -3, -9, 363.7 mm ABM1/ABM2 = 13.8 dB BWC Factor = 0.0152737 dB Location: -3, -9, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 5 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 Y RADIAL MEASUREMENT: CDMA 1900 Channel 600 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH600/y (transversal) 16 x 24/ABM Point meas,TCoil on CH600/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.3 dB A/m ABM1 comp = -17.1 dB A/m BWC Factor = 0.015794 dB BWC Factor = 0.0152737 dB Location: 5, -10.2, 363.7 mm Location: 1, -5, 363.7 mm Point meas,TCoil on CH600/y (transversal) at max Point meas,TCoil on CH600/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -44.0 dB A/m ABM1/ABM2 = 26.9 dB Location: 1, -5, 363.7 mm BWC Factor = 0.0152737 dB Location: 1, -5, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 6 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 Z (AXIAL) MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/z (axial) rough 50 x 50/ABM Interpolated Signal(x,y,z) (51x51x1): Measurement grid: dx=10mm, dy=10mm Cursor: ABM1 = -7.00 dB A/m BWC Factor = 0.0152737 dB Location: 5, -4, 363.7 mm Scans CH1175/z (axial) 16 x 16/ABM Interpolated Point meas,TCoil on CH1175/z (axial) at max z/ABM Signal(x,y,z) (41x41x1): Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -5.47 dB A/m ABM1 comp = -10.4 dB A/m BWC Factor = 0.0152737 dB BWC Factor = 0.015187 dB Location: 3.8, -3.4, 363.7 mm Location: 9, -1, 363.7 mm Point meas,TCoil on CH1175/z (axial) at max z/ABM Point meas,TCoil on CH1175/z (axial) at max z/ABM Noise(x,y,z) (1x1x1): SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -40.2 dB A/m ABM1/ABM2 = 29.8 dB Location: 9, -1, 363.7 mm BWC Factor = 0.015187 dB Location: 9, -1, 363.7 mm Z (axial) rough 50x50 scan: Z (axial) 16x16scan: 0 dB = 1.00A/m 0 dB = 1.00A/m Kyocera Wireless Corp. Page 7 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 X RADIAL MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/x (longitudinal) 24 x 16/ABM Point meas,TCoil on CH1175/x (longitudinal) at Interpolated Signal(x,y,z) (61x41x1): max x/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -12.9 dB A/m ABM1 comp = -14.4 dB A/m BWC Factor = 0.0152737 dB BWC Factor = 0.015187 dB Location: -2.2, -1, 363.7 mm Location: -3, -1, 363.7 mm Point meas,TCoil on CH1175/x (longitudinal) at Point meas,TCoil on CH1175/x (longitudinal) at max x/ABM Noise(x,y,z) (1x1x1): max x/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: ABM1/ABM2 = 10.6 dB ABM2 = -25.0 dB A/m BWC Factor = 0.015187 dB Location: -3, -1, 363.7 mm Location: -3, -1, 363.7 mm X (Radial) 24x16 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 8 of 9 Model: K33BIC-01

FCC ID: OVF-K33BIC01 Y RADIAL MEASUREMENT: CDMA 1900 Channel 1175 Equipment Setting: DUT: Ceramix; Type: Cellular Phone ; Serial Number: 3139; Date: 12/14/2008 Communication System: CDMA; Frequency: 1910 MHz;Duty Cycle: 1:1 Medium parameters used: σ = 0 mho/m, εr = 1; ρ = 0 kg/m3 Phantom section: AMB with Coil Section DASY4 Configuration: - Probe: AM1DV2 - 1045; ; Calibrated: 9/18/2008 - Sensor-Surface: 0mm (Fix Surface) - Electronics: DAE4 Sn530; Calibrated: 4/15/2008 - Phantom: HAC Test Arch with Coil; Type: SD HAC P01 BA; Serial: 100x - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 Scans CH1175/y (transversal) 16 x 24/ABM Point meas,TCoil on CH1175/y (transversal) at max Interpolated Signal(x,y,z) (41x61x1): y/ABM Signal(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM1 = -13.3 dB A/m ABM1 comp = -17.1 dB A/m BWC Factor = 0.0152737 dB BWC Factor = 0.015187 dB Location: 4.6, -9.4, 363.7 mm Location: 1, -5, 363.7 mm Point meas,TCoil on CH1175/y (transversal) at max Point meas,TCoil on CH1175/y (transversal) at max y/ABM Noise(x,y,z) (1x1x1): y/ABM SNR(x,y,z) (1x1x1): Measurement grid: dx=10mm, dy=10mm Measurement grid: dx=10mm, dy=10mm Cursor: Cursor: ABM2 = -42.1 dB A/m ABM1/ABM2 = 25.0 dB Location: 1, -5, 363.7 mm BWC Factor = 0.015187 dB Location: 1, -5, 363.7 mm Y (Radial) 16x24 scan: 0 dB = 1.00A/m Kyocera Wireless Corp. Page 9 of 9 Model: K33BIC-01


Document Created: 2008-12-17 12:55:06
Document Modified: 2008-12-17 12:55:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC