Test report

FCC ID: OU9TMB1490BS

Test Report

Download: PDF
FCCID_3907663

FCC - TEST REPORT Report Number : 64.790.18.00884.01 Date of Issue: 2018-06-20 Model : TMB-1490-BS Product Type : Blood Pressure Monitor Applicant : Guangdong Transtek Medical Electronics Co.,Ltd Address : Zone A, No.105, Dongli Road, Torch Development District, 528437, : Zhongshan, Guangdong, China Production Facility : Guangdong Transtek Medical Electronics Co.,Ltd Address : Zone B, No.105, Dongli Road, Torch Development District, 528437, : Zhongshan, Guangdong, China Test Result :  Positive  Negative Total pages including Appendices : 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 64.790.18.00884.01 Page 1 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

1 Table of Contents 1 Table of Contents ................................................................................................................................ 2 2 Details about the Test Laboratory .................................................................................................... 3 3 Description of the Equipment Under Test ....................................................................................... 4 4 Summary of Test Standards .............................................................................................................. 5 5 Summary of Test Results ................................................................................................................... 6 6 General Remarks ................................................................................................................................ 7 7 Test Setups .......................................................................................................................................... 8 8 Systems test configuration ................................................................................................................. 9 9 Technical Requirement .................................................................................................................... 10 9.1 Conducted peak output power ................................................................................................. 13 9.2 Power spectral density .............................................................................................................. 16 9.3 6 dB Bandwidth and 99% Occupied Bandwidth.................................................................... 19 9.4 Spurious RF conducted emissions.......................................................................................... 22 9.5 Band edge ................................................................................................................................... 26 9.6 Spurious radiated emissions for transmitter .......................................................................... 28 10 Test Equipment List....................................................................................................................... 32 11 System Measurement Uncertainty .............................................................................................. 33 Report Number: 64.790.18.00884.01 Page 2 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District Shenzhen 518052 P.R. China Telephone: 86 755 8828 6998 Fax: 86 755 828 5299 FCC Registration 514049 No.: Report Number: 64.790.18.00884.01 Page 3 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

3 Description of the Equipment Under Test Product: Blood Pressure Monitor Model no.: TMB-1490-BS SN: BS0337171200008D FCC ID: OU9TMB1490BS Options and accessories: N/A Rating: Battery:6.0VDC Power adapter:BLJ06L060100P-U Power adapter input:100-240V~ 50/60Hz,0.2A Max Power adapter output:6VDC,1000mA RF Transmission 2402MHz-2480MHz Frequency: No. of Operated Channel: 40 Modulation: GFSK Antenna Type: Internal Antenna Antenna Gain: 0.0dBi Description of the EUT: The Equipment Under Test (EUT) TMB-1490-BS is Blood Pressure Monitor operated at 2.402-2.48GHz Report Number: 64.790.18.00884.01 Page 4 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

4 Summary of Test Standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES 10-1-2016 Edition Subpart C - Intentional Radiators All the test methods were according to KDB558074 D01 v01 DTS Measurement Guidance and ANSI C63.10 (2013). Report Number: 64.790.18.00884.01 Page 5 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Test Result Test Condition Site Pass Fail N/A §15.207 Conducted emission AC power port Site 1 §15.247 (b) (1) Conducted peak output power Site 1 §15.247(a)(1) 20dB bandwidth --- §15.247(a)(1) Carrier frequency separation --- §15.247(a)(1)(iii) Number of hopping frequencies --- §15.247(a)(1)(iii) Dwell Time --- 6dB bandwidth and 99% Occupied §15.247(a)(2) Site 1 Bandwidth §15.247(e) Power spectral density Site 1 §15.247(d) Spurious RF conducted emissions Site 1 §15.247(d) Band edge Site 1 Spurious radiated emissions for §15.247(d) & §15.209 Site 1 transmitter See §15.203 Antenna requirement note 1 Note 1: N/A=Not Applicable. Note 2: The EUT uses a Integrated antenna, which gain is 0.0dBi. In accordance to §15.203, it is considered sufficiently to comply with the provisions of this section. Report Number: 64.790.18.00884.01 Page 6 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

6 General Remarks This submittal(s) (test report) is intended for FCC ID:; OU9TMB1490BS complies with Section 15.207, 15.209, 15.247 of the FCC Part 15, Subpart C rules. TMB—1490—BS is Blood Pressure Monitor with Bluetooth 4.0. The TX and RX range is 2402MHz— 2480MHz for 4.0. SUMMARY: All tests according to the regulations cited on page 5 were — Performed — Not Performed The Equipment under Test — Fulfills the general approval requirements. — Does not fulfill the general approval requirements. Testing Start Date: March 27, 2018 Testing End Date: May 31, 2018 — TUV SUD Certification and Testing (China) Co., Ltd. Guangzhou Branch — Reviewed by: ¥ y ore= /fim@\ Prepared P by: Y: P Kevin QuYyang Report Number: 64.790.18.00884.01 Page 7 of 33 TUV SUD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building, 163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

7 Test Setups 7.1 AC Power Line Conducted Emission test setups 7.2 Radiated test setups 7.3 Conducted RF test setups Measuring EUT Receiver Report Number: 64.790.18.00884.01 Page 8 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

8 Systems test configuration Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) Notebook Lenovo X220 --- Mobile phone Huawei P10 --- Non-Invasive Blood --- FLUKE BP Pump 2 --- Pressure Simulator Test software: nRFgo Studio, which used to control the EUT in continues transmitting mode. The system was configured to channel 0, 19, and 39 for the test. Report Number: 64.790.18.00884.01 Page 9 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9 Technical Requirement 9.1 Conducted Emission Test Method 1. The EUT was placed on a table, which is 0.8m above ground plane 2. The power line of the EUT is connected to the AC mains through an Artificial Mains Network (A.M.N.). 3. Maximum procedure was performed to ensure EUT compliance 4. A EMI test receiver is used to test the emissions from both sides of AC line Limit According to §15.207, conducted emissions limit as below: Frequency QP Limit AV Limit MHz dBμV dBμV 0.150-0.500 66-56* 56-46* 0.500-5 56 46 5-30 60 50 “*”: Decreasing linearly with logarithm of the frequency Report Number: 64.790.18.00884.01 Page 10 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Conducted Emission Product Type : Blood pressure monitor M/N : TMB-1490-BS Operating Condition : EUT on with Bluetooth function on. Test Specification : Line Comment : AC 120V/60Hz Final_Result Frequency QuasiPeak Average Limit Margin Line Corr. (MHz) (dBµV) (dBµV) (dBµV) (dB) (dB) 0.422000 45.07 --- 57.41 12.33 L1 11.4 0.850000 33.66 --- 56.00 22.34 L1 10.2 1.150000 33.35 --- 56.00 22.65 L1 10.2 1.330000 32.43 --- 56.00 23.57 L1 10.2 1.794000 32.37 --- 56.00 23.63 L1 10.3 2.142000 32.71 --- 56.00 23.29 L1 10.3 Report Number: 64.790.18.00884.01 Page 11 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Conducted Emission Product Type : Blood pressure monitor M/N : TMB-1490-BS Operating Condition : EUT on with Bluetooth function on. Test Specification : Neutral Comment : AC 120V/60Hz Final_Result Frequency QuasiPeak Average Limit Margin Line Corr. (MHz) (dBµV) (dBµV) (dBµV) (dB) (dB) 0.414000 44.54 --- 57.57 13.03 N 10.3 0.658000 32.36 --- 56.00 23.64 N 10.4 0.822000 31.00 --- 56.00 25.00 N 10.4 1.178000 33.57 --- 56.00 22.43 N 10.4 1.738000 32.92 --- 56.00 23.08 N 10.4 2.142000 32.52 --- 56.00 23.48 N 10.4 Report Number: 64.790.18.00884.01 Page 12 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.2 Conducted peak output power Test Method 1. Use the following spectrum analyzer settings: RBW > the 6 dB bandwidth of the emission being measured, VBW≥3RBW, Span≥3RBW Sweep = auto, Detector function = peak, Trace = max hold. 2. Add a correction factor to the display. 3. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. The indicated level is the peak output power. Limits According to §15.247 (b) (1), conducted peak output power limit as below: Frequency Range Limit Limit MHz W dBm 2400-2483.5 ≤1 ≤30 Test result as below table Conducted Peak Frequency Output Power Result MHz dBm Bottom channel 2402MHz -2.70 Pass Middle channel 2440MHz -1.73 Pass Top channel 2480MHz -0.82 Pass Report Number: 64.790.18.00884.01 Page 13 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Low channel 2402MHz Middle channel 2440MHz Report Number: 64.790.18.00884.01 Page 14 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

High channel 2480MHz Report Number: 64.790.18.00884.01 Page 15 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.3 Power spectral density Test Method This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance: 1. Set analyzer center frequency to DTS channel center frequency. RBW=3kHz, VBW≥3RBW, Span=1.5 times DTS bandwidth, Detector=Peak, Sweep=auto, Trace= max hold. 2. Allow trace to fully stabilize, use the peak marker function to determine the maximum amplitude level within the RBW . 3. Repeat above procedures until other frequencies measured were completed. Limit Limit [dBm] ≤8 Test result Power spectral Frequency density Result MHz dBm Bottom channel 2402MHz -16.54 Pass Middle channel 2440MHz -15.50 Pass Top channel 2480MHz -14.64 Pass Report Number: 64.790.18.00884.01 Page 16 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Low channel 2402MHz Middle channel 2440MHz Report Number: 64.790.18.00884.01 Page 17 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

High channel 2480MHz Report Number: 64.790.18.00884.01 Page 18 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.4 6 dB Bandwidth and 99% Occupied Bandwidth Test Method 1. Use the following spectrum analyzer settings: RBW=100K, VBW≥3RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Use the automatic bandwidth measurement capability of an instrument, may be employed using the X dB bandwidth mode with X set to 6 dB, care shall be taken so that the bandwidth measurement is not influenced by any intermediate power nulls in the fundamental emission that might be ≥ 6 dB. 3. Allow the trace to stabilize, record the X dB Bandwidth value. Limit Limit [kHz] ≥500 Test result Frequency 6dB bandwidth 99% bandwidth Result MHz kHz kHz Bottom channel 2402MHz 707.7 1150.51 Pass Middle channel 2440MHz 703.3 1196.26 Pass Top channel 2480MHz 703.3 1263.39 Pass Report Number: 64.790.18.00884.01 Page 19 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

6 dB Bandwidth Low channel 2402MHz Middle channel 2440MHz Report Number: 64.790.18.00884.01 Page 20 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

High channel 2480MHz Report Number: 64.790.18.00884.01 Page 21 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.5 Spurious RF conducted emissions Test Method 1. Establish a reference level by using the following procedure: a. Set RBW=100 kHz. VBW≥3RBW. Detector =peak, Sweep time = auto couple, Trace mode = max hold. b. Allow trace to fully stabilize, use the peak marker function to determine the maximum PSD level. 2. Use the maximum PSD level to establish the reference level. a. Set the center frequency and span to encompass frequency range to be measured. b. Use the peak marker function to determine the maximum amplitude level. Ensure that the amplitude of all unwanted emissions outside of the authorized frequency band (excluding restricted frequency bands) are attenuated by at least the minimum requirements, report the three highest emissions relative to the limit. 3. Repeat above procedures until other frequencies measured were completed. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 Report Number: 64.790.18.00884.01 Page 22 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Spurious RF conducted emissions 2402MHz Report Number: 64.790.18.00884.01 Page 23 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

2440MHz Report Number: 64.790.18.00884.01 Page 24 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

2480MHz Report Number: 64.790.18.00884.01 Page 25 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.6 Band edge Test Method 1 Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold. 2 Allow the trace to stabilize, use the peak and delta measurement to record the result. 3 The level displayed must comply with the limit specified in this Section. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 Report Number: 64.790.18.00884.01 Page 26 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Band edge testing 2402MHz 2480MHz Report Number: 64.790.18.00884.01 Page 27 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

9.7 Spurious radiated emissions for transmitter Test Method 1: The EUT was place on a turn table which is 1.5m above ground plane for above 1GHz and 0.8m above ground for below 1GHz at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. 2: The EUT was set 3 meters away from the interference – receiving antenna, which was mounted on the top of a variable – height antenna tower. 3: The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4: For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5: Use the following spectrum analyzer settings According to C63.10: For Above 1GHz Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 1MHz, VBW≥RBW for peak measurement and VBW = 10Hz for average measurement, Sweep = auto, Detector function = peak, Trace = max hold. For Below 1GHz Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 KHz, VBW≥RBW for peak measurement, Sweep = auto, Detector function = peak, Trace = max hold. Note: 1: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 KHz for Quasi-peak detection (QP) at frequency below 1GHz. 2: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for peak detection (PK) at frequency above 1GHz. 3: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average ((duty cycle ˂ 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (20log(1/duty cycle). 4: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (duty cycle ˃ 98%) for Average detection (AV) at requencyabove1GHz Report Number: 64.790.18.00884.01 Page 28 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Limit The radio emission outside the operating frequency band shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Radiated emissions which fall in the restricted bands, as defined in section15.205, must comply with the radiated emission limits specified in section 15.209. Frequency Field Strength Field Strength Detector MHz uV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK Report Number: 64.790.18.00884.01 Page 29 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

Spurious radiated emissions for transmitter According to C63.10, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary to perform an average measurement, so AV emission value did not show in below table if the peak value complies with average limit. Transmitting spurious emission test result as below: Below 1GHz Emission Correct Frequency Frequency Polarization Limit Detector Margin Result Level factor Band MHz dBuV/m dBμV/m dB (dB) 239.897222 41.13 H 46.00 QP 4.87 -27.3 Pass 311.785000 38.99 H 46.00 QP 7.01 -24.1 Pass 359.800000 34.38 H 46.00 QP 11.62 -23.8 Pass 30- 504.006667 31.25 H 46.00 QP 14.75 -21.6 Pass 1000MHz 56.944444 31.14 V 40.00 QP 8.86 -25.9 Pass 71.925556 27.37 V 40.00 QP 12.63 -30.9 Pass 239.897222 37.33 V 46.00 QP 8.67 -27.7 Pass 311.838889 37.21 V 46.00 QP 18.05 -15.0 Pass Above 1GHZ Low channel 2402MHz Test Result Emission Correct Frequency Frequency Polarization Limit Detector Margin Result Level factor Band MHz dBuV/m dBμV/m dB (dB) 1242.375000 30.99 H 74 PK 43.01 -12.2 Pass 4803.750000 45.88 H 74 PK 28.12 2.5 Pass 1000- 7206.093750 46.84 H 74 PK 27.16 5.2 Pass 25000MHz 1244.375000 29.86 V 74 PK 44.14 -12.1 Pass 4803.750000 47.26 V 74 PK 26.74 2.6 Pass 7206.093750 43.15 V 74 PK 30.85 5.4 Pass Middle channel 2440MHz Test Result Emission Correct Frequency Frequency Polarization Limit Detector Margin Result Level factor Band MHz dBuV/m dBμV/m dB (dB) 1247.062500 30.18 H 74 PK 43.82 -12.2 Pass 1000- 4879.687500 44.80 H 74 PK 29.20 2.5 Pass 25000MHz 1255.125000 30.78 V 74 PK 43.22 -11.9 Pass 4879.687500 48.45 V 74 PK 25.55 2.6 Pass Report Number: 64.790.18.00884.01 Page 30 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

High channel 2480MHz Test Result Emission Correct Frequency Frequency Polarization Limit Detector Margin Result Level factor Band MHz dBuV/m dBμV/m dB (dB) 1240.000000 32.85 H 74 PK 41.15 -12.2 Pass 1000- 4959.843750 47.38 H 74 PK 26.62 2.7 Pass 25000MHz 1240.000000 33.21 V 74 PK 40.79 -12.1 Pass 4959.843750 47.84 V 74 PK 26.16 2.8 Pass Remark: (1) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. (2) Data of measurement within this frequency range shown “--” in the table above means the reading of emissions are the noise floor or attenuated more than 10dB below the permissible limits or the field strength is too small to be measured. (3) Above 1GHz: Corrector factor = Antenna Factor + Cable Loss- Amplifier Gain Below 1GHz: Corrector factor = Antenna Factor + Cable Loss Report Number: 64.790.18.00884.01 Page 31 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

10 Test Equipment List List of Test Instruments Radiated Emission Test Description Manufacturer Model no. Serial no. cal. due date EMI Test Receiver Rohde & Schwarz ESR 26 101269 2018-7-14 Trilog Super Broadband Test Schwarzbeck VULB 9163 707 2018-7-14 Antenna Horn Antenna Rohde & Schwarz HF907 102294 2018-7-14 Pre-amplifier Rohde & Schwarz SCU 18 102230 2018-7-14 Signal Generator Rohde & Schwarz SMY01 839369/005 2018-7-7 Attenuator Agilent 8491A MY39264334 2018-7-7 3m Semi-anechoic chamber TDK 9X6X6 ---- 2020-7-7 Test software Rohde & Schwarz EMC32 Version 9.15.00 N/A Conducted Emission Test Description Manufacturer Model no. Serial no. cal. due date EMI Test Receiver Rohde & Schwarz ESR 3 101782 2018-7-14 LISN Rohde & Schwarz ENV4200 100249 2018-7-14 LISN Rohde & Schwarz ENV432 101318 2018-7-14 LISN Rohde & Schwarz ENV216 100326 2018-7-14 ISN Rohde & Schwarz ENY81 100177 2018-7-14 ISN Rohde & Schwarz ENY81-CA6 101664 2018-7-14 TK9420(VT94 High Voltage Probe Rohde & Schwarz 9420-584 2018-7-14 20) RF Current Probe Rohde & Schwarz EZ-17 100816 2018-7-14 Attenuator Shanghai Huaxiang TS2-26-3 080928189 2018-7-7 Test software Rohde & Schwarz EMC32 Version9.15.00 N/A TS8997 Test System Description Manufacturer Model no. Serial no. cal. due date Signal Generator Rohde & Schwarz SMB100A 108272 2018-7-7 Signal Analyzer Rohde & Schwarz FSV40 101030 2018-7-7 Vector Signal Generator Rohde & Schwarz SMU 200A 105324 2018-7-7 RF Switch Module Rohde & Schwarz OSP120/OSP-B157 101226/100851 2018-7-7 Power Splitter Weinschel 1580 SC319 2018-7-7 10dB Attenuator Weinschel 56-10 58764 2018-7-14 10dB Attenuator R&S DNF DNF-001 2018-7-14 10dB Attenuator R&S DNF DNF-002 2018-7-14 10dB Attenuator R&S DNF DNF-003 2018-7-14 10dB Attenuator R&S DNF DNF-004 2018-7-14 Test software Rohde & Schwarz EMC32 Version 9.26.01 N/A Report Number: 64.790.18.00884.01 Page 32 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478

11 System Measurement Uncertainty For a 95% confidence level, the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 were: System Measurement Uncertainty Test Items Extended Uncertainty Uncertainty for Conducted Emission 150kHz-30MHz (for test 2.92 dB using High Voltage Probe TK9420(VT9420)) Uncertainty for Radiated Spurious Emission 25MHz- Horizontal: 4.98dB; 3000MHz Vertical: 5.06dB; Uncertainty for Radiated Spurious Emission 3000MHz- Horizontal: 4.95dB; 18000MHz Vertical: 4.94dB; Uncertainty for Radiated Spurious Emission 18000MHz- Horizontal: 5.14dB; 40000MHz Vertical: 5.12dB; Uncertainty for Conducted RF test with TS 8997 Power level test involved: 2.06dB Frequency test involved: 1.16×10-7 Report Number: 64.790.18.00884.01 Page 33 of 33 TÜV SÜD Certification and Testing (China) Co., Ltd. Guangzhou Branch 5F, Communication Building,163 Pingyun Rd, Huangpu Ave. West Guangzhou, P.R.China TEL: +86 20 3832 0668 FAX: +86 20 3832 0478


Document Created: 2019-06-02 06:16:26
Document Modified: 2019-06-02 06:16:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC