Test Report

FCC ID: OU9LS417-F01

Test Report

Download: PDF
FCCID_3373510

Report Number: 68.930.17.019.01 FCC - TEST REPORT Report Number : 68.930.17.019.01 Date of Issue: April 14, 2017 Model : LS417-F, LS418-F Product Type : Lifesense Band 2, Lifesense Band 2S Applicant : Guangdong Transtek Medical Electronics Co., Ltd Address : Zone A, No. 105, Dongli Road, Torch Development District 528437 Zhongshan, Guangdong, PEOPLE'S REPUBLIC OF CHINA Production Facility : Guangdong Transtek Medical Electronics Co., Ltd Address : Zone B, No. 105, Dongli Road, Torch Development District 528437 Zhongshan, Guangdong, PEOPLE'S REPUBLIC OF CHINA Test Result :  Positive  Negative Total pages including Appendices : 28 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 1 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 1 Table of Contents 1 Table of Contents ................................................................................................................................................................ 2 2 Details about the Test Laboratory..................................................................................................................................... 3 3 Description of the Equipment under Test ........................................................................................................................ 4 4 Summary of Test Standards .............................................................................................................................................. 5 5 Summary of Test Results ................................................................................................................................................... 6 6 General Remarks ................................................................................................................................................................ 7 7 Test Setups .......................................................................................................................................................................... 8 8 Systems test configuration ................................................................................................................................................. 9 9 Technical Requirement ........................................................................................................................................................ 10 9.1 Conducted peak output power................................................................................................................................ 10 9.2 6dB bandwidth .......................................................................................................................................................... 13 9.3 Power spectral density............................................................................................................................................. 15 9.4 Spurious RF conducted emissions ........................................................................................................................ 17 9.5 Band edge ................................................................................................................................................................. 21 9.6 Spurious radiated emissions for transmitter ......................................................................................................... 23 10 Test Equipment List ...................................................................................................................................................... 27 11 System Measurement Uncertainty ............................................................................................................................. 28 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 2 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China FCC Registration 502708 Number: IC Registration 10320A-1 Number: Telephone: 86 755 8828 6998 Fax: 86 755 828 5299 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 3 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 3 Description of the Equipment under Test Description of the Equipment Under Test Product: Lifesense Band 2S Model no.: LS418-F FCC ID: OU9LS417-F01 Options and accessories: NIL Rating: 5VDC, 0.5A (Charging by USB port) 3.8VDC, 75mAh (Supplied by the internal Li-ion rechargeable battery) RF Transmission 2402-2480MHz Frequency: No. of Operated Channel: 40 Modulation: GFSK Antenna Type: Integrated Antenna Antenna Gain: -2.0dBi Description of the EUT: The Equipment Under Test (EUT) is a Lifesense Band 2S with Bluetooth function operating at 2.4GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 4 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES 10-1-2016 Edition Subpart C - Intentional Radiators All the test methods were according to KDB558074 DTS Measurement Guidance and ANSI C63.10 (2013). EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 5 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition Pages Test Result Test Site §15.207 Conducted emission AC power port -- N/A -- §15.247(b)(1) Conducted peak output power 10 Pass Site 1 §15.247(e) Power spectral density* 15 Pass Site 1 §15.247(a)(2) 6dB bandwidth 13 Pass Site 1 §15.247(a)(1) 20dB bandwidth and 99% Occupied -- N/A -- Bandwidth §15.247(a)(1) Carrier frequency separation -- N/A -- §15.247(a)(1)(iii) Number of hopping frequencies -- N/A -- §15.247(a)(1)(iii) Dwell Time -- N/A -- §15.247(d) Spurious RF conducted emissions 17 Pass Site 1 §15.247(d) Band edge 21 Pass Site 1 §15.247(d) & Spurious radiated emissions for 23 Pass Site 1 §15.209 & transmitter and receiver §15.203 Antenna requirement See Pass -- note 1 Remark 1: N/A – Not Applicable. Note 1: The EUT uses an Integrated Antenna, which gain is -2.0dBi. According to §15.203, it is considered sufficiently to comply with the provisions of this section. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 6 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 6 General Remarks Remarks This submittal(s) (test report) is intended for FCC ID: OU9LS417-F01 complies with Section 15.209, 15.247 of the FCC Part 15, Subpart C. This report is for the BT 4.0 part. SUMMARY: All tests according to the regulations cited on page 5 were  - Performed  - Not Performed The Equipment under Test  - Fulfills the general approval requirements.  - Does not fulfill the general approval requirements. Sample Received Date: April 10, 2017 Testing Start Date: April 10, 2017 Testing End Date: April 14, 2017 - TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch - Reviewed by: Prepared by: Tested by: _______________________ _______________________ _______________________ Phoebe Hu Aaron Lai Leon Zhang EMC Project Manager EMC Project Engineer EMC Test Engineer EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 7 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 7 Test Setups Below 1GHz Above 1GHz 7.2 Conducted RF test setups Measuring EUT Receiver EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 8 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 8 Systems test configuration Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) --- --- --- --- Test software: nRF go studio test tool, which used to control the EUT in continues transmitting mode. The system was configured to channel 0, 19, and 39 for the test. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 9 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9 Technical Requirement 9.1 9.1 Conducted peak output power Test Method 1. Use the following spectrum analyzer settings: RBW > the 6 dB bandwidth of the emission being measured, VBW≥3RBW, Span≥3RBW Sweep = auto, Detector function = peak, Trace = max hold. 2. Add a correction factor to the display. 3. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. The indicated level is the peak output power. Limits According to §15.247 (b) (1), conducted peak output power limit as below: Frequency Range Limit Limit MHz W dBm 2400-2483.5 ≤1 ≤30 Test result as below table Conducted Peak Frequency Output Power Result MHz dBm Bottom channel 2402MHz -3.15 Pass Middle channel 2440MHz -3.27 Pass Top channel 2480MHz -3.53 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 10 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 2402MHz 2440MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 11 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 12 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9.2 6dB bandwidth Test Method 1. Use the following spectrum analyzer settings: RBW=100K, VBW≥3RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Use the automatic bandwidth measurement capability of an instrument, may be employed using the X dB bandwidth mode with X set to 6 dB, care shall be taken so that the bandwidth measurement is not influenced by any intermediate power nulls in the fundamental emission that might be ≥ 6 dB. 3. Allow the trace to stabilize, record the X dB Bandwidth value. Limit Limit [kHz] ≥500 Test result Frequency 6dB bandwidth 99 bandwidth Result MHz kHz kHz Bottom channel 2402MHz 699.00 1072.40 Pass Middle channel 2440MHz 694.60 1072.40 Pass Top channel 2480MHz 694.60 1072.40 Pass 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 13 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 6 dB Bandwidth 2440MHz 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 14 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9.3 Power spectral density Test Method This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance: 1. Set analyzer center frequency to DTS channel center frequency. RBW=3kHz, VBW≥3RBW, Span=1.5 times DTS bandwidth, Detector=Peak, Sweep=auto, Trace= max hold. 2. Allow trace to fully stabilize, use the peak marker function to determine the maximum amplitude level within the RBW . 3. Repeat above procedures until other frequencies measured were completed. Limit Limit [dBm] ≤8 Test result Power spectral Frequency density Result MHz dBm Bottom channel 2402MHz -21.67 Pass Middle channel 2440MHz -21.76 Pass Top channel 2480MHz -22.01 Pass 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 15 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 2440MHz 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 16 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9.4 Spurious RF conducted emissions Test Method 1. Establish a reference level by using the following procedure: a. Set RBW=100 kHz. VBW≥3RBW. Detector =peak, Sweep time = auto couple, Trace mode = max hold. b. Allow trace to fully stabilize, use the peak marker function to determine the maximum PSD level. 2. Use the maximum PSD level to establish the reference level. a. Set the center frequency and span to encompass frequency range to be measured. b. Use the peak marker function to determine the maximum amplitude level. Ensure that the amplitude of all unwanted emissions outside of the authorized frequency band (excluding restricted frequency bands) are attenuated by at least the minimum requirements, report the three highest emissions relative to the limit. 3. Repeat above procedures until other frequencies measured were completed. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 17 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Spurious RF conducted emissions 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 18 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Spurious RF conducted emissions 2440MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 19 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Spurious RF conducted emissions 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 20 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9.5 Band edge Test Method 1 Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold. 2 Allow the trace to stabilize, use the peak and delta measurement to record the result. 3 The level displayed must comply with the limit specified in this Section. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 Test result 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 21 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Band edge 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 22 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 9.6 Spurious radiated emissions for transmitter Test Method 1: The EUT was place on a turn table which is 1.5m above ground plane for above 1GHz and 0.8m above ground for below 1GHz at 3-meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. 2: The EUT was set 3 meters away from the interference – receiving antenna, which was mounted on the top of a variable – height antenna tower. 3: The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4: For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5: Use the following spectrum analyzer settings According to C63.10: For Above 1GHz Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 1MHz, VBW≥RBW for peak measurement and VBW = 10Hz for average measurement, Sweep = auto, Detector function = peak, Trace = max hold. For Below 1GHz Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 KHz, VBW≥RBW for peak measurement, Sweep = auto, Detector function = peak, Trace = max hold. Note: 1: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 KHz for Quasi-peak detection (QP) at frequency below 1GHz. 2: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for peak detection (PK) at frequency above 1GHz. 3: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average ((duty cycle ˂ 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (20log(1/duty cycle)). 4: The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (duty cycle ˃ 98%) for Average detection (AV) at frequency above 1GHz. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 23 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Limit The radio emission outside the operating frequency band shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Radiated emissions which fall in the restricted bands, as defined in section15.205, must comply with the radiated emission limits specified in section 15.209. Frequency Field Strength Field Strength Detector MHz uV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 24 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 Spurious radiated emissions for transmitter According to C63.10, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary to perform an average measurement, so AV emission value did not show in below table if the peak value complies with average limit. Transmitting spurious emission test result as below: 2402MHz (30MHz – 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m 938.76 33.56 Horizontal 46.00 QP Pass 954.34 35.85 Vertical 46.00 QP Pass 2402MHz (Above 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m 7206.56 47.32 Horizontal 74.00 PK Pass 7205.15 48.55 Vertical 74.00 PK Pass 2440MHz (30MHz – 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m -- -- Horizontal -- QP Pass -- -- Vertical -- QP Pass 2440MHz (Above 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m 7319.06 56.25 Horizontal 74.00 PK Pass 7319.06 41.18 Horizontal 54.00 AV Pass 7319.06 48.03 Vertical 74.00 PK Pass Remark: (1) Data of measurement within this frequency range shown “-” in the table above means the reading of emissions are attenuated more than 20db below the permissible limits or the field strength is too small to be measured. (2) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 25 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 2480MHz (30MHz – 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m -- -- Horizontal -- QP Pass -- -- Vertical -- QP Pass 2480MHz (Above 1GHz) Emission Frequency Polarization Limit Detector Result Level MHz dBuV/m dBμV/m 7439.06 52.67 Horizontal 74.00 PK Pass 7440.00 51.18 Vertical 74.00 PK Pass Remark: (1) Data of measurement within this frequency range shown “-” in the table above means the reading of emissions are attenuated more than 20db below the permissible limits or the field strength is too small to be measured. (2) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 26 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 10 Test Equipment List List of Test Instruments DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. CAL. DUE DATE EMI Test Receiver Rohde & Schwarz ESR 3 101782 2017-7-15 LISN Rohde & Schwarz ENV4200 100249 2017-7-15 LISN Rohde & Schwarz ENV216 100326 2017-7-15 ISN Rohde & Schwarz ENY81 100177 2017-7-15 ISN Rohde & Schwarz ENY81-CA6 101664 2017-7-15 TK9420(VT94 High Voltage Probe Rohde & Schwarz 9420-58 2017-7-15 20) RF Current Probe Rohde & Schwarz EZ-17 100816 2017-7-15 Attenuator Shanghai Huaxiang TS2-26-3 080928189 2017-7-17 Test software Rohde & Schwarz EMC32 Version9.15.00 N/A Signal Analyzer Rohde & Schwarz FSV40 101030 2017-7-15 C - Conducted RF tests  Conducted peak output power  6dB bandwidth  Power spectral density*  Spurious RF conducted emissions  Band edge EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 27 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.17.019.01 11 System Measurement Uncertainty For a 95% confidence level, the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 were: System Measurement Uncertainty Test Items Extended Uncertainty Uncertainty for Radiated Spurious Emission 25MHz-3000MHz Horizontal: 4.98dB; Vertical: 5.06dB; Uncertainty for Radiated Spurious Emission 3000MHz- Horizontal: 4.95dB; 18000MHz Vertical: 4.94dB; Uncertainty for Radiated Spurious Emission 18000MHz- Horizontal: 5.14dB; 40000MHz Vertical: 5.12dB; Uncertainty for Conducted RF test with TS 8997 Power level test involved: 2.06dB Frequency test involved: 1.16×10-7 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 28 of 28 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299


Document Created: 2017-04-21 10:15:11
Document Modified: 2017-04-21 10:15:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC