RF Test Report

FCC ID: OU9LS102-H

RF Exposure Info

Download: PDF
FCCID_3290235

                                                 SGS—CSTC Standards Technical Services Co., Ltd.
                                                 Guangzhou Branch

198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological
DevelopmentDistrict, Guangzhou, China 510663                                                               Report No.: GZEM1701000325CR
Telephone: +86 (0) 20 82156555                                                                             Page:                          1 of 1
Fax:       +86 (0) 20 82075059
Email:        ee.quangzhou@sgs.com                                                                         FCC ID: OUSLS102—H




     RF Exposure Compliance Requirement
      The product belongs to standalone portable device base the FCC rule part 2.109182.1093. The
      transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation
      distance is 5mm.
      The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below:


                .                                    Max Conducted Output Power                                SAR Test Exclusion
         Transmit frequency (GHz)
                                                                        ({mW)                                     Threshold (mW)
                       2402                                            1023                                                 9.7
                       2440                                            1072                                                 9.6
                       2480                                            o.891                                                9.5

      The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from:
      1)—   The 1—g and 10—g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
      = 50 mm are determined by:
      [{max. power of channel, including tune—up tolerance, mW)/(min. test separation distance, mm}] :
      [/f(GHz)] < 3.0 for 1—g SAR                       and = 7.5 for 10—g extremity SAR,                        where
              1(GHz) is the RF channel transmit frequency in GHz
              Power and distance are rounded to the nearest mW and mm before calculation
            The result is rounded to one decimal place for comparison
      The test exclusions are applicable only when the minimum test separation distance is = 50 mm and for
      transmission frequencies between 100 MHz and 6 GHz.                                    When the minimum test separation disfance is < 5
      mm, a distance of 5 mm is applied to determine SAR test exclusion.



      According to SAR Exclusion Threshold in KDB 447498 (DO01) General RF Exposure
      Guidance v06, the SAR report is not required.




Thdocament is inmued ty the Gompany autiecto s GereralGondions ot Senice rinled ovedea, valaie on reruest oracconsil a ilestn ns comfon‘Temzart:Gorction aspeandfor
electoniformal locumenta,uabiect Terma ard Conalonatr Helnic Docummant t iesin aas comon‘omaarc:ondlonaTeis—DocavonLasss. Allntion iravn t iematon of
fanlity, indermieaon and hrinieion ies deine fhewn. Any holder oBdamment i avaed nat normallon Gontaad hereorefecis he Gommarya ncnaathe e ot e nfewenton
onty ans wihn tmt Gients natueion, any. The Copary‘s wlereagonal y i tts e and i locament oo rl soneralesarlo o a anaacon m exrcn l et and
oieatons under e tanaacfon docurments Thisdociment cavrl h reprovcad oecanin All wihout riorwen ansrosaoffre Gomsary. Ary unailtorzed aratn, lrueryor / teater the
corfer or aseaance o is docament in univl anotlendecs may h nronecute t he tleat old ot e lav
Unless oftecise stt hereautsnhown in i lot renoreler onl o h namslla) fetod and aue sarmnlt) e relaind ho 50 iays only



Document Created: 2017-02-17 08:09:33
Document Modified: 2017-02-17 08:09:33

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC