68.930.15.046.01-FCC, IC Report -BT4.0

FCC ID: OU9BS-1507

Test Report

Download: PDF
FCCID_2879493

Report Number: 68.930.15.046.01 FCC/IC - TEST REPORT Report Number : 68.930.15.046.01 Date of Issue: December 2, 2015 Model : RPM-SCALE100 Product Type : 901077 WEIGHT SCALE Applicant : Guangdong Transtek Medical Electronics Co.,Ltd Address : Zone A, No.105 ,Dongli Road, Torch Development District, Zhongshan,Guangdong, China 528437 Production Facility : Guangdong Transtek Medical Electronics Co.,Ltd Address : Zone A, No.105 ,Dongli Road, Torch Development District, Zhongshan,Guangdong, China 528437 Test Result :  Positive  Negative Total pages including 23 Appendices : TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 1 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks.................................................................................................................................................................... 7 7 Test Setups ............................................................................................................................................................................. 8 8 Systems test configuration ..................................................................................................................................................... 9 9 Technical Requirement ........................................................................................................................................................ 10 9.1 Conducted peak output power ..................................................................................................................................... 10 9.2 Power spectral density................................................................................................................................................. 11 9.3 6 dB Bandwidth and 99% Occupied Bandwidth ......................................................................................................... 12 9.4 Spurious RF conducted emissions ............................................................................................................................... 14 9.5 Band edge testing ........................................................................................................................................................ 18 9.6 Spurious radiated emissions for transmitter ................................................................................................................ 20 10 Test Equipment List ............................................................................................................................................................. 22 11 System Measurement Uncertainty ....................................................................................................................................... 23 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 2 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 FCC Registration No.: 502708 IC Registration No.: 10320A-1 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 3 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 3 Description of the Equipment Under Test Product: 901077 WEIGHT SCALE Model no.: RPM-SCALE100 FCC ID: OU9BS-1507 IC 12725A-BS1507 Options and accessories: Nil Rating: DC6.0 V Supplied by 1.5VX4AAA batteries RF Transmission 2402MHz-2480MHz Frequency: No. of Operated Channel: 40 Modulation: GFSK Antenna Type: PCB Antenna Gain: -1.58dBi Description of the EUT: The Equipment Under Test (EUT) is a Bluetooth body scale operated at 2.4GHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 4 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES 10-1-2014 Edition Subpart C - Intentional Radiators RSS-247 Digital Transmission Systems (DTSs), Frequency Hopping Systems Issue 1 2015 (FHSS) and Licence-Exempt Local Area Network (LE-LAN) Devices All the test methods were according to KDB558074 D01 DTS Meas Guidance v03r02 issued by FCC on July 05, 2014 and ANSI C63.10 (2009). EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 5 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition Pages Test Result §15.207 RSS-GEN A8.8 Conducted emission AC -- N/A power port §15.247(b)(1) RSS-247 Clause Conducted peak output 10 Pass 5.4(2) power §15.247(e) RSS-247 Clause Power spectral density* 11 Pass 5.2(2) §15.247(a)(2) RSS-247 Clause 6dB bandwidth 12 Pass 5.2(1) §15.247(a)(1) RSS-247 Clause 20dB bandwidth and 99% -- N/A 5.1(1) Occupied Bandwidth §15.247(a)(1) RSS-247 Clause Carrier frequency -- N/A 5.1(2) separation §15.247(a)(1)(iii) RSS-247 Clause Number of hopping -- N/A 5.1(4) frequencies §15.247(a)(1)(iii) RSS-247 Clause Dwell Time -- N/A 5.1(4) §15.247(d) RSS-247 Clause Spurious RF conducted 14 Pass 5.5 emissions §15.247(d) RSS-247 Clause Band edge 18 Pass 5.5 §15.247(d) & RSS-247 Clause Spurious radiated 20 Pass §15.209 & 5.5 emissions for transmitter & RSS-GEN 6.13 §15.203 RSS-GEN 8.3 Antenna requirement See note 1 Pass Note 1: N/A=Not Applicable. Note 2: The EUT uses a PCB antenna, which gain is -1.58dBi. In accordance to §15.203, it is considered sufficiently to comply with the provisions of this section. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 6 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 6 General Remarks Remarks This submittal(s) (test report) is intended for FCC ID: OU9BS-1507, IC: 12725A-BS1507 complies with Section 15.207, 15.209, 15.247 of the FCC Part 15, Subpart C, RSS 247 and RSS-Gen rules. SUMMARY: All tests according to the regulations cited on page 5 were  - Performed  - Not Performed The Equipment Under Test  - Fulfills the general approval requirements.  - Does not fulfill the general approval requirements. Sample Received Date: October 15, 2015 Testing Start Date: October 15, 2015 Testing End Date: November 15, 2015 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Reviewed by: Prepared by: Tested by: _______________________ _______________________ _______________________ Phoebe Hu Felix Li Leon Zhang EMC Project Manager EMC Project Engineer EMC Test Engineer EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 7 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 7 Test Setups 7.1 AC Power Line Conducted Emission test setups 7.2 Radiated test setups 7.3 Conducted RF test setups Measuring EUT Receiver EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 8 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 8 Systems test configuration Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) --- --- --- --- Test software: nRFgo Studio, which used to control the EUT in continues transmitting mode EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 9 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 9 Technical Requirement 9.1 Conducted peak output power Test Method 1. Use the following spectrum analyzer settings: Span = approximately 5 times the 20 dB bandwidth, centered on a hopping channel RBW > the 20 dB bandwidth of the emission being measured, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Add a correction factor to the display. 3. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. The indicated level is the peak output power Limits Frequency Range Limit Limit MHz W dBm 2400-2483.5 ≤1 ≤30 Conducted peak output power BT 4.0 Bluetooth Mode GFSK modulation Test Result Conducted Peak Frequency Output Power Result MHz dBm Low channel 2402MHz -3.38 Pass Middle channel 2440MHz -2.76 Pass High channel 2480MHz -2.95 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 10 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 9.2 Power spectral density Test Method This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance: 1. Set analyzer center frequency to DTS channel center frequency. RBW=3kHz,VBW≥3RBW,Span=1.5 times DTS bandwidth, Detector=Peak, Sweep=auto, Trace= max hold 2. Allow trace to fully stabilize, use the peak marker function to determine the maximum amplitude level within the RBW . 3. Repeat above procedures until other frequencies measured were completed Limit Limit [dBm] ≤8 BT 4.0 Bluetooth Mode GFSK modulation Test Result Frequency Power spectral Limit Result MHz density dBm 2402 -18.54 8 Pass 2440 -16.15 8 Pass 2480 -16.83 8 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 11 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 9.3 6 dB Bandwidth and 99% Occupied Bandwidth Test Method 1. Use the following spectrum analyzer settings: RBW=100K, VBW≥3RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Use the automatic bandwidth measurement capability of an instrument, may be employed using the X dB bandwidth mode with X set to 6 dB, care shall be taken so that the bandwidth measurement is not influenced by any intermediate power nulls in the fundamental emission that might be ≥ 6 dB. 3. Allow the trace to stabilize, record the X dB Bandwidth value. Limit Limit [kHz] ≥500 BT 4.0 Bluetooth Mode GFSK modulation Test Result Frequency 6 dB Bandwidth Limit Result MHz kHz kHz 2402 774.2 500 Pass 2440 709.1 500 Pass 2480 651.2 500 Pass 6 dB Bandwidth EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 12 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 6 dB Bandwidth EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 13 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 9.4 Spurious RF conducted emissions Test Method 1. Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics) from the lowest frequency generated in the EUT up through the 10th harmonic. Typically, several plots are required to cover this entire span. RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Allow the trace to stabilize. Set the marker on the peak of any spurious emission recorded. 3. The level displayed must comply with the limit specified in this Section. Submit these plots. 4. Repeat above procedures until all frequencies measured were complete. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 14 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 Spurious RF conducted emissions BT4.0 GFSK Modulation: 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 15 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 2440MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 16 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 17 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: se.000.15.045.01 9.5 Band edge testing Test Method 1. Use the following spectrum analyzer settings wide enough to capture the peak level of the in—band emission and all spurious 100 kHz, VBWERBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Allow the trace to stabiize, use the peak and della measurement to record the result 3. The level dispiayed must comply with the limit specified in this Section. . 4. Repoat the fest at the hopping off and hopping on mode, submitall the plots. Limit: In any 100 kiz bandwidth outside the frequency band in which the spread spectrum or digitaly modulated device is operating, the RF power that is produced shall be at least 20 dB below that in the100 kiz bandwidth within the band that confains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided that the transmitter demonstrates compliance with the peak conducted powerImits. sucszinzr00rce 0stbconterenmpatonny on 5o us srententaren Page 18 023 Aturmcee tepulormierinenmbiecmedion"

Report Number: 68.930.15.046.01 Band edge testing BT4.0 GFSK Modulation Test Result EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 19 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 9.6 Spurious radiated emissions for transmitter Test Method 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 3. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured, RBW = 1 MHz for f ≥ 1GHz, 100 kHz for f < 1 GHz, VBW ≥ RBW, Sweep = auto, Detector function = peak, Trace = max hold 4. Follow the guidelines in ANSI C63.4-2009 with respect to maximizing the emission by rotating the EUT, adjusting the measurement antenna height and polarization, etc. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength, submit this data. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 5. Set the VBW to 10 Hz, while maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the duty cycle per channel of the hopping signal is less than 100 ms, then the reading obtained with the 10 Hz VBW may be further adjusted by a “duty cycle correction factor”, derived from 20log(duty cycle/100 ms), in an effort to demonstrate compliance with the 15.209 limit. Submit this data. Limit The radio emission outside the operating frequency band shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Radiated emissions which fall in the restricted bands, as defined in section15.205, must comply with the radiated emission limits specified in section 15.209. Frequency Field Strength Field Strength Detector MHz uV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 20 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 Spurious radiated emissions for transmitter According to C63.10, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary to perform an average measurement, so AV emission value did not show in below table if the peak value complies with average limit. The only worse case (which is subject to the maximum EIRP, GFSK mode) test result is listed in the report. Transmitting spurious emission test result as below: BT4.0 GFSK Modulation 2402MHz Test Result Frequency Emission Frequency Polarization Limit Detector Margin Result Level MHz MHz dBuV/m dBμV/m dBuV/m 30-1000 -- -- -- -- -- -- Pass 30-1000 -- -- -- -- -- -- Pass 1000-26000 4804 44.02 H 74 PK 29.98 Pass 1000-26000 7206 40.83 H 74 PK 33.17 Pass 1000-26000 4804 47.08 V 74 PK 26.92 Pass 1000-26000 7206 52.81 V 74 PK 21.19 Pass BT4.0 GFSK Modulation 2440MHz Test Result Frequency Emission Frequency Polarization Limit Detector Margin Result Level MHz MHz dBuV/m dBμV/m dBuV/m 1000-26000 4880 43.44 H 74 PK 30.56 Pass 1000-26000 7320 47.09 H 74 PK 26.91 Pass 1000-26000 4880 48.24 V 74 PK 25.76 Pass 1000-26000 7320 59.72 V 74 PK 14.28 Pass 1000-26000 7320 51.45 V 54 AV 2.55 Pass BT4.0 GFSK Modulation 2440MHz Test Result Frequency Emission Frequency Polarization Limit Detector Margin Result Level MHz MHz dBuV/m dBμV/m dBuV/m 1000-26000 4960 43.53 H 74 PK 30.47 Pass 1000-26000 7440 45.35 H 74 PK 28.65 Pass 1000-26000 4960 47.68 V 74 PK 26.32 Pass 1000-26000 7440 53.35 V 74 PK 20.65 Pass Remark: (1) AV Emission Level= PK Emission Level+20log(dutycycle) (2) Data of measurement within this frequency range shown “-” in the table above means the reading of emissions are attenuated more than 20db below the permissible limits or the field strength is too small to be measured. (3) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 21 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 10 Test Equipment List List of Test Instruments CAL. DUE DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. DATE EMI Test Receiver Rohde & Schwarz ESR 3 101782 2016-7-24 LISN Rohde & Schwarz ENV4200 100249 2016-7-24 LISN Rohde & Schwarz ENV216 100326 2016-7-24 ISN Rohde & Schwarz ENY81 100177 2016-7-24 CE ISN Rohde & Schwarz ENY81-CA6 101664 2016-7-24 TK9420(VT9 High Voltage Probe Rohde & Schwarz 9420-58 2016-7-24 420) RF Current Probe Rohde & Schwarz EZ-17 100816 2016-7-24 Test software Rohde & Schwarz EMC32 Version9.15.00 N/A C Signal Generator Rohde & Schwarz SMB100A 108272 2016-7-24 Signal Analyzer Rohde & Schwarz FSV40 101030 2016-7-24 Vector Signal Rohde & Schwarz 105324 2016-7-24 SMU 200A Generator OSP120/OS RF Switch Module Rohde & Schwarz 101226/100851 2016-7-24 P-B157 Signal Analyzer Rohde & Schwarz FSV40 101031 2016-7-24 Trilog Super Broadband Test Schwarzbeck VULB 9163 708 2016-7-31 Antenna RE Horn Antenna Rohde & Schwarz HF907 102295 2016-7-24 Wideband Horn QWH-SL-18- Q-PAR 12827 2017-10-21 Antenna 40-K-SG Pre-amplifier Rohde & Schwarz SCU 18 102230 2016-7-24 Pre-amplifier Rohde & Schwarz SCU 40A 100432 2016-7-24 C - Conducted RF tests  Conducted peak output power  6dB bandwidth  20dB bandwidth and 99% Occupied Bandwidth  Carrier frequency separation  Number of hopping frequencies  Dwell Time  Power spectral density*  Spurious RF conducted emissions  Band edge EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 22 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.15.046.01 11 System Measurement Uncertainty For a 95% confidence level, the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 were: System Measurement Uncertainty Test Items Extended Uncertainty Uncertainty for Radiated Emission in 3m chamber 30MHz-1000MHz Horizontal: 4.83dB; Vertical: 4.91dB; Uncertainty for Radiated Emission in 3m chamber 1000MHz- Horizontal: 4.89dB; 18000MHz Vertical: 4.88dB; Uncertainty for Conducted Emission 150KHz-30MHz U=3.5dB(k=2) EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 23 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299


Document Created: 2016-01-13 17:34:22
Document Modified: 2016-01-13 17:34:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC