18_SOLO19 RFExp

FCC ID: OR8-SOLO19

RF Exposure Info

Download: PDF
FCCID_3740578

Reference No.: WTS17S1298000-2E FCC ID: OR8-SOLO19 RF Exposure Report Test Requirement: FCC Part 1.1307 Evaluation Method FCC Part2.1093 & KDB 447498 D01 General RF Exposure Guidance v06 Requirements 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR where 1. f(GHz) is the RF channel transmit frequency in GHz 2. Power and distance are rounded to the nearest mW and mm before calculation 3. The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The procedures / limit Source-based Minimum test SAR Test SAR Test Conducted Conducted time-averaged separation distance Exclusion Exclusion Peak Peak maximum required for the Thresholds Result Thresholds power(dBm) power(mW) conducted output exposure conditions Calculation Limit power(mW) (mm) Value 4.08 2.56 2.56 5 0.806 3.0 Compliance Remark: Max. duty factor is 100% Low Chanel: f=2402MHz=2.402GHz, so √f(GHz)=1.550 High Chanel: f=2480MHz=2.480GHz, so √f(GHz)=1.575 Result: Compliance No SAR measurement is required. Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn


Document Created: 2018-01-31 21:12:11
Document Modified: 2018-01-31 21:12:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC