15_TX145WSDTH UserMan-US

FCC ID: OMOTX145WSDTH

Users Manual

Download: PDF
FCCID_4466070

L A CROSSE® TECHNOLOGY WIRELESS WEATHER STATION WITH TEMPERATURE, WIND, & HUMIDITY SET UP GUIDE MODEL NUMBER S81120






Positioning the Breeze Sensor For Accurate Measurements + Mount the Breeze Sensor horizontally and ensure it‘s level. * The sensor should be mounted with the wind cups on top. * Your Breeze Sensor should be the tallest object in the area to avoid reduced wind speed values. * To optimize the use of the Breeze Sensor‘s Solar Panel, battery life, and wind direction readings, ensure that the sensor is mounted with the solar panel facing directly to the South. * Make sure all of the screws on the mounting bracket, wind cups, wind vane, and battery compartment are securely fastened. * Ensure the knob on the mounting bracket is secure and stays in your desired configuration. 7 r— Avoid areas that may obstruct The Breeze Sensor should be The sensor may be mounted on wind gusts such as eaves, the tallest objectin the area. An a pole away from any objects that rooflines, or trees. unobstructed rooftop is an ideal may cause inaccurate readings. location. For additional sensor information, visit: www.lacrossetechnology.com/support The illustrations above are not to scale and are for informative purposes only. m





Add—On Temperature & Humidity Sensor If you feel the temperature & humidity is not reading as desired from your Breeze Sensor, you can add a separate Thermo—Hygro (TH) e Sensor to your system. Purchase Your Add—On Sensor at (or scan QR Code): www.lacrossetechnology.com/sensor—finder Search for compatible sensors using the station‘s model number (S81120). Add—On Sensor TH Set Up 1. Insert 2 "AA" Batteries into the sensor battery compartment. 2. Press the MINUS (—) button on the station. The outdoor temperature/humidity readings will flash. 3. Hold the MINUS (—) button to delete the temperature and humidity readings provided from the Breeze Sensor. The station will begin to search for the new TH Sensor. 4. Press the TX button inside the sensor battery compartment to transmit a signal. Once connected, the TH Sensor Icon l will appear on the LCD. Note: Your station will only show temperature/humidity readings from one sensor (either the Breeze Sensor or a separate TH Sensor). If readings are lost from one of the sensors, n your station may pick up the readings from the other sensor on its own.


Add—On Rain Sensor This station is also compatible with an add—on rain sensor. Purchase Your Add—On Sensor at (or scan QR Code): www.lacrossetechnology.com/sensor—finder using the station‘s model number (S81120). Add—On Rain Sensor Set Up 1. Insert 2 "AA" Batteries into the sensor battery compartment. 2. Hold the RAIN button on the station. NO will appear on the LCD. Hold the RAIN button again to search for the rain sensor. 3. Allow up to 5 minutes for station to receive the signal. Viewing Your Rain Data: Your rain data will appear in the time section of the LCD. 263.( 12342 Hold the RAIN button to view rain data. To return to the time display, hold the m RAIN and SET buttons together.


APPENDIX Specifications STATION SPECIFICATIONS (S81120) SENSOR SPECIFICATIONS (LTV—WSDTHO1) «+ Indoor Temp. Range: 32°F to 99°F (0°C to 37°C) + Wind Speed Range: 0 to 111 mph (0 to 178 kMh) «+ Indoor Humidity Range: 10 to 99%RH Degrees of Direction: 360° with 16 Cardinal Directions «+ Power Requirements: Outdoor Temp. Range: —20°F to 140°F (—29°C to 60°C)* + Primary Power: 5.0V AC Adapter (included) Outdoor Humidity Range: 10 to 39%RH «+ Battery Backup: 2 "AA" Batteries Transmission Range: 330 Feet (100 Meters) {sold separately) Power Requirements: 1 Rechargeable ML2032 «+ Station Dimensions: 3.77" L x 114" W x 7.01" H Coin Cell Battery (included)** (2.6cm L x 2.89cm W x 17.82cm H) Update Interval: Every 31 Seconds®* « LCD Brightness: 4 Intensity Levels + OFF Sensor Dimensions: (Programmable Auto—Dim Backlight Option) + With Bracket: 6.21" L x 12.28" W x 9.87" H «+ Language Options: (15.77¢m L x 3119cm W x 25.07cm H) English, Spanish, French, and German + Without Bracket: 6.21" L x 8.25" W x 6.67" H (Translation Available for Menus & Calendar) (15.77¢m L x 20.96cm W x 16.94cm H) *Please Note: The Breeze Sensor will operate accurately at temperatures down to 40°F. The solar panel needs to be WARNING exposed to maximum sunlight and clear of snow to maintain . This product contains a button battery. > 2. If swallowed, It could cause severe Injury or death in Just 2 hours. the internal super capacitor charge for severe cold weather 3. Seek medical attention immediately. operation. The transmission interval may be automatically reduced during low sunlight and extreme cold to extend WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN operation time. 1. Swallowing may lead to serious injury in as little as 2 hours or death, **Using a non—rechargeable coin cell battery can potentially ruin due to chemlcal burns and potentlal perforation of the esophagus. the sensor. Ensure the replacement battery specifically states 2. If you suspect your child has swallowed or inserled a bution battery, that it‘s a ML2032 Rechargeable Battery. immediately seek urgent medical assistance. 3. Examine devices and make surethe battery compartment is correctly secured, e.g. that the screw or other mechanical fasteneris tightened. 4. Do not use if compartment is not secure. 5. Dispose of used button batterias ImmedIately and safely. Flat batteries can still be dangerous. 6. Tell others about the risk assoctated with button batteries and how to keep their children safe.


FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. «+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. + Increase separation between equipment & receiver. + Consult the dealer or an experienced radio/TV technician for help. This device must not be co—located or operating in conjunction with any other antenna or transmitter, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Canada Statement California Residents This device complies with CNR Industry Canada A WARNING: license—exempt devices. . — . . : This product can expose you to chemicals including Operation is subject to the following two conditions: styrene, which is known in the State of California to (1) This device may not cause interference; and cause cancer. (2) This device must accept any interference, For more information, go to: www.P6SWarnings.ca.gov including interference that may cause undesired operation of the device. Designed in La Crosse, Wisconsin * Made in China + Printed in China + DC 071019 fl

Having Trouble? We‘re here to help. For detailed product videos, manuals, and more, visit our support website: www.lacrossetechnology.com/support Make sure you have your product‘s model number handy (S81120) If you need additional support, get in touch with our friendly customer support team: Online: bit.ly/contact_techsupport Phone Number: 1—855—605—6888 Representatives are available Monday—Friday, 8:00am to 6:00pm CST Factory Reset Stay in Touch If you‘re still experiencing Ask questions, watch set up videos, and issues, press and hold the provide feedback on our social media outlets. LIGHT and ALERTS buttons down together until the display beeps. Note: All alerts and history records will be reset as well. Follow La Crosse Technology on Youtube, Facebook, Twitter, and Instagram.



Document Created: 2019-09-26 10:35:27
Document Modified: 2019-09-26 10:35:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC