15_WMSMCZ3H UserMan-US r1

FCC ID: OKUSBB78133

Users Manual

Download: PDF
FCCID_4367531

MODEL:WMSMCZ3H / WMSMCZ3H-SB A PAIR C B A PAIR C B - INSTALLATION AND OPERATION MANUAL - PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

TABLE OF CONTENTS INTRODUCTION...............................................................................................3 FEATURES........................................................................................................3 PARTS INCLUDED WITH MAIN UNIT..............................................................3 IMPORTANT SAFETY INSTRUCTIONS.......................................................... 4 PLACING AND MOUNTING..............................................................................6 GENERAL VIEW............................................................................................... 7 SPEAKER/POWER WIRE SOCKET DIAGRAM............................................... 9 REMOTE CONTROL...................................................................................... 10 BATTERY INSTALLATION--REMOTE CONTROL........................................ 11 GENERAL OPERATIONS.............................................................................. 12 LISTEN TO FM RADIO................................................................................... 13 BLUETOOTH PAIRING AND PLAYBACK...................................................... 14 ADDING OPTIONAL EXTERNAL SUBWOOFER...........................................15 CONNECT USING OPTICAL..........................................................................16 CONNECT TO TV(ANALOG)..........................................................................17 CONNECT USING HDMI IN............................................................................18 CONNECT USING HDMI OUT........................................................................19 AUX IN............................................................................................................ 20 USB.................................................................................................................20 TROUBLESHOOTING GUIDE....................................................................... 21 SPECIFICATIONS.......................................................................................... 22 2

INTRODUCTION Thank you for choosing a Connexx product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to review, you will learn how to use all the features of your new media center for maximum enjoyment. FEATURES Features of the WMSMCZ3H media center include: Digital FM tuner w/10 presets Bluetooth wireless technology 3 zone audio distribution HDMI (ARC) on rear panel HDMI IN on front panel 3.5 mm aux input jack on front panel USB input on front panel w/device charging capabilities Digital Optical input on rear panel Analog Stereo Input on Rear Panel LED backlit controls Wireless remote control included PARTS INCLUDED WITH MAIN UNIT A B C ARC X TUNE+ User Manual / TUNE- PAIR EQ AAA AAA User Manual Remote Control with Two Batteries Wire Harness for Speakers DC Power Extension screw cover (Red and Black) Wire FM Antenna 3

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to CAUTION the presence of uninsulated “dangerous voltage” RISK OF ELECTRIC SHOCK DO NOT OPEN within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric CAUTION: TO REDUCE THE RISK OF shock to persons. ELECTRIC SHOCK, DO NOT REMOVE The exclamation point within an equilateral triangle COVER (OR BACK). NO USER- is intended to alert the user to the presence of SERVICEABLE PARTS INSIDE. REFER important operating and maintenance (servicing) S E RV I C I N G TO Q U A L I F I E D S E RV I C E instructions in the literature accompanying the PERSONNEL. appliance. FCC NOTICE: DANGER: Invisible and hazardous laser This equipment has been tested and found radiation when open and interlock to comply with the limits for a Class B digital failed or defeated. Avoid direct exposure to beam. device, pursuant to part 15 of the FCC Rules. These limits are designed to provide WARNING: reasonable protection against harmful TO REDUCE THE RISK OF FIRE OR interference in a residential installation. This ELECTRIC SHOCK, DO NOT EXPOSE THIS equipment generates, uses and can radiate PRODUCT TO RAIN OR MOISTURE. radio frequency energy and, if not Installed and used in accordance with the instructions, WARNING: may cause harmful interference to radio TO REDUCE THE RISK OF FIRE OR communications. However, there is no guarantee that interference will not occur ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED in a particular installation. If this equipment ACCESSORIES ONLY. does cause harmful interference to radio or television which can be determined by Before using the unit, be sure to read all reception, turning the equipment off and on, operating instructions carefully. Please note the user is encouraged to try to correct the that these are general precautions and may interference by one or more of the following not pertain to your unit. measures: 1 ) Read these instructions ● Reorient or relocate the receiving All the safety and operating instructions should antenna. Increase the separation between be read before the product is operated. the equipment and receiver. 2 ) Keep these instructions ● Connect the equipment into an outlet The safety and operating instructions should with a circuit different from that to which the be retained for future reference. receiver is connected. ● Consult the dealer or an experienced 3 ) Heed all warnings radio/TV technician for help. All warnings on the product and in the operating instructions should be adhered to. FCC WARNING: 4 ) Follow all instructions To assure continued compliance, follow the All operating and use instructions should be attached installation instructions and use only followed. shielded cables when connecting to other devices. Modifications not authorized by the 5 ) Do not use this apparatus near water manufacturer may void user`s authority to Do not use this product near water and operate this device. moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 4

6 ) Clean only with dry cloth 13 ) Refer all servicing to qualified service Unplug this product from the wall outlet before personnel. Servicing is required when the cleaning. Do not use liquid cleaners or aerosol apparatus has been damaged in any way, such cleaners. Use a dry cloth for cleaning. as power-supply cord or plug is damaged, liquid 7)Do not block any ventilation has been spilled or objects have fallen into the openings. Install in accordance with the apparatus, the apparatus has been exposed to manufacturer's instructions rain or moisture does not operate normally, or Slots and openings in the cabinet and in the has been dropped. back or bottom are provided for ventilation, to ensure reliable operation of the product and 14 ) Power source to protect it from overheating. These openings This product should be operated only from the must not be blocked or covered. The openings type of power source indicated on the marking should never be blocked by placing the product label. If you are not sure of the type of power on a bed, sofa, rug or other similar surface. supply to your home, consult your appliance This product should never be placed near or dealer or local power company. For products over a radiator or heat source. This product intended to operate from battery power, or other should not be placed in a built-in installation source, refer to the operation instructions. such as a bookcase or rack unless proper ventilation is provided or the manufacturer's 15 ) Service instructions have been adhered to. Do not attempt to service this product yourself 8 ) Do not install near any heat sources such as opening or removing covers may expose as radiators, heat registers, stoves, or other you to dangerous voltage or other hazards. apparatus(including amplifiers) that produce Refer all servicing to qualified service heat. personnel. 9 ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized WARNING: plug has two blades with one wider than other. To reduce the risk of fire or electric shock, do A grounding type plug has two blades and a not expose this apparatus to rain or moisture. third grounding prong. The wide blade or the The apparatus shall not be exposed to dripping third prong are provided for your safety. If the or splashing and that objects filled with liquids, provided plug does not fit into your outlet, such as vases shall not be placed on apparatus. consult an electrician for replacement of the obsolete outlet. 10 ) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 ) Only use attachments/accessories specified by the manufacturer. 12 ) Unplug this apparatus during lightning storms or when unused for long periods of time To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the product due to lightning and power-line surges. 5

PLACING & MOUNTING 1. Placing When placing the media center in any type of enclosed space, be sure to allow space around it for ventilation. If placing in a tight space without ventilation, heat generated from the unit could produce a potential heat hazard. 2. Mounting Rough opening cut-out (WMSMCZ3H)........................................................10 5/8(Width) x 3 3/4(Height) x 5 5/8(Depth) in (WMSMCZ3H-SB)..................................................28 3/4(Width) x 3 3/4(Height) x 5 5/8(Depth) in about 140mm (5 5/8 in ) about 140mm (5 5/8 in ) 6

GENERAL VIEW Front View 1 2 3 4 5 6 A 7 PAIR C 10 B 11 8 9 12 13 14 15 16 1. Zone A touch button 9. Zone B touch button 2. Zone C touch button 10. Next touch button 3. Display 11. Play/pause, Station recall touch button 4. Remote sensor 12. Volume down touch button 5. Previous touch button 13. Power on/off button 6. Volume up touch button 14. USB port 7. Source touch button 15. AUX IN jack 8. PAIR touch button 16. HDMI IN port Display 1 BT TV AUX FM OPTICAL USB HDMI ARC A B 2 4 C 3 X 1. Mode 3. Mute 2. Audio zone 4. FM frequency 7

Rear View 1 HDMI OUT (ARC) 2 OPTICAL IN EXT IR TV AUDIO IN 3 4 5 6 7 1. HDMI OUT (ARC) jack 5. OPTICAL IN jack 2. ANTENNA jack 6. EXTERNAL SUBWOOFER connector 3. TV AUDIO IN jacks 7. Power/speaker wire harness socket 4. EXT IR jack 8

SPEAKER/POWER WIRE SOCKET DIAGRAM GRAY- B RIGHT + SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE 12V DC CAUTION! Power Connecting the speakers Extension incorrectly will cause distortion and damage the power amplifier. RED - POWER IN 12V + BLACK - POWER GND 10A FUSE BLACK - POWER GND VIOLET - C RIGHT + RED - POWER IN 12V + 10A FUSE GREEN/BLACK - C LEFT - BLUE/BLACK - A RIGHT - VIOLET/BLACK - C RIGHT - WHITE - B LEFT + GREEN - C LEFT + BLUE - A RIGHT + ORANGE - A LEFT + WHITE/BLACK - B LEFT - GRAY/BLACK - B RIGHT - ORANGE/BLACK - A LEFT - GRAY - B RIGHT + 9

REMOTE CONTROL 1. Power on/off button 2. Zone A button 1 3. Zone B button 4. Source button 2 A B C ARC 10 3 11 5. TUNE + button 4 X 12 6. Previous button 5 TUNE+ 6 / 13 7. TUNE - button 8. PAIR button 7 TUNE- 14 9. EQ button 8 PAIR 10. ARC (audio return channel) button 15 9 EQ 11. Zone C button 12. Mute button 13. Next button 14. Play/pause, preset button 15. VOL+,VOL- button Optional External Remote Sensor EXT IR (External Remote Sensor) Jack on rear panel If using the external optional remote sensor, insert the plug into the EXT IR Jack as the arrowhead shown on above picture. This will allow the remote control to work in another zone if desired. 10

BATTERY INSTALLATION--- REMOTE CONTROL Battery Installation 1.Slide and lift the battery door (Figure 1). 2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2). 3.Replace the battery door (Figure 3). Battery - + + - Battery Precaution Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the coorrect polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together(e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer's instructions). 6. The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like. 7. Clean the battery contacts and also those of the device prior to battery installation. Remote Control Effective Range When there is an obstacle between A the unit and the remote control, the PAIR C remote control may B not operate properly. When direct sunlight, an incandescent lamp, fluorescent 16 Feet (5M) lamp or any other strong light A B C ARC X TUNE+ shines on the remote sensor PAIR / TUNE- EQ of the unit, the operation of remote control may be unstable. 11

GENERAL OPERATIONS 1. Press the button on the unit or remote control to power on the unit from standby mode. 2. Press the button on remote control or touch the button on unit repeatedly to switch to desired mode as listed: BT TV AUX FM OPTICAL USB HDMI ARC NOTE: USB mode will be selected when the USB device is inserted. 3. During Playback: ~ Press the VOL+/VOL- buttons on the remote control or touch the + or - button on the unit to adjust volume level as desired. ~ Press X button on the remote control to mute the sound on all active zones. Press again to resume. ~ Press A, B or C button on the remote control or touch A, B or C button on the unit to switch ON or OFF the corresponding ZONE A/B/C speakers. ~ Press the EQ button on remote control repeatedly to set to different EQ mode. 4. When finished listening, press the button on the unit or remote control to power off the unit. 5. If the unit is not used for long period of time, please disconnect power. 12

LISTEN TO FM RADIO BEFORE OPERATION Insert the Antenna into the ANTENNA Jack on rear panel as illustrated as below. SEARCHING STATION 1. Power ON the unit. 2. Press the button on remote control or touch the button on unit repeatedly to switch to FM mode, the FM frequency will appear on the display. 3. Touch and hold the or button on front of the unit or press and hold the TUNE- or TUNE + button on remote control, then release the button to search the previous or next available FM station automatically, when a station searched, it will playback automatically. 4. Touch the or button on front of the unit or press the TUNE- or TUNE+ button on remote control to fine tune. STATIONS STORAGE THROUGH THE TOUCH BUTTON ON UNIT When a station searched, touch and hold the / button to display the storage location (such as Pxx, the xx stands for 01-10), then press / button to change and select the desired storage location, touch and hold the / button to confirm and complete station storage. A total of 10 stations can be stored into the unit's memory. STATIONS STORAGE THROUGH THE BUTTON ON REMOTE CONTROL When a station searched, press and hold the / button to display the storage location (such as Pxx, the xx stands for 01-10), then press the / button to change and select the desired storage location, press and hold the / button to confirm and complete station storage. A total of 10 stations can be stored into the unit's memory. PRESET RECALL Touch the / button on the unit or press the / on remote control repeatedly to select the preset stored station and playback. FM Antenna The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the unit to improve the radio reception. 13

BLUETOOTH PAIRING AND PLAYBACK 1. Power ON the unit. 2. Press the button on remote control or touch the button on unit repeatedly until "BT" appears on display and blinks, now it is in BT pairing mode. 3. Activate the external BT Device and enter BT searching mode. Start pairing as the screen instructions on the external BT Player. For details pairing procedures, please refer to the user's manual of your BT Device. 4. When the external BT Device searched the unit, 'WMSMCZ3H' will appear on the display of the external BT Device, select it and make connection. 5. After successfully paired and connected, the "BT" on display will stay lit. 6. If you want to connect with other BT device, press the PAIR button on remote control or touch the PAIR button on the unit to disconnect the current pairing and connection, then try to pair and connect with other BT device. During playback: Press the VOL+/VOL- buttons on the remote control or touch the + or - button on the unit to adjust volume level as desired. NOTE: After pairing for the first time, the unit will remember and automatically pair with the last connected device when the bluetooth of the device and the unit are activated within range. 14

ADDING OPTIONAL EXTERNAL SUBWOOFER - + NOTE: Before connecting, please disconnect power. 1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear of the unit as the figure above. 2. Connect the other end to the "-" Jack on the rear of the unit as the figure above. 3. Power ON the unit. 4. Play the music as usual and set the desired volume. 15

CONNECT USING OPTICAL External DVD player OPTICAL OUT Optical Cable(Not Supplied) NOTE: Before connecting, please disconnect power. 1. Connect one end of optical connection cable ( not supplied ) to the OPTICAL IN jack on the rear of the unit as pictured above. 2. Connect the other end to the OPTICAL OUT jack on DVD PLAYER. 3. Power ON the unit. 4. Press the button on remote control or touch the button on unit repeatedly until "OPTICAL" appears on display. 5. Set the desired volume. 16

CONNECT TO TV (ANALOG) R L TV Red White TV AUDIO IN TV White L Audio Out Jacks of R TV/DVD/VCR/DVR Audio Cable(Not Supplied) Red NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit. 3. Press the button on remote control or touch the button on unit repeatedly until " TV " appears on display. TV audio is selected and will play through the unit. 4. Play the audio or video as usual and set the desired volume. 17

CONNECT USING HDMI IN HDMI OUT (ARC) To HDMI OUT (ARC) To HDMI IN on front on rear of the unit of the unit STEP ONE STEP TWO To HDMI IN(ARC) on TV To HDMI OUT on the DVD player OPTICAL OUT TV not supplied External DVD player(not supplied) NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit, the external DVD player and the TV. 3. Press the button on remote control or touch the button on unit repeatedly until " HDMI " appears on display. 4. Play the audio CD through external DVD player if only connected like STEP ONE. Play the DVD through external DVD player when connected like STEP ONE and STEP TWO. NOTE: The sound setting in DVD player must be set to PCM format. 18

CONNECT USING HDMI OUT HDMI OUT (ARC) TV HDMI Cable (not supplied) To HDMI IN on TV NOTE: Before connecting, please disconnect power. 1. Connect as the figure above. 2. Power ON the unit. 3. Press the button on remote control or touch the button on unit repeatedly until " ARC " appears on display. 4. Play the audio or video through TV as usual and set to the desired volume. NOTE: The TV must have the ARC capability, and connected to HDMI ARC jack on capable TV. No matter which mode the unit is in, press the ARC button on remote control to switch back to ARC mode. 19

AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES AUX IN cable not included MP3 smart phone To the Phones/Aux Out/Line Out Jack on the external audio device 1. Connect one end of audio connection cable to the AUX IN jack on the front of the unit as illustrated above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as iPod, iPhone, iPad, MP3 player, smart phone... etc. ) 3. Power ON the unit. 4. Press the button on remote control or touch the button on unit repeatedly until " AUX " appears on display. 5. Play the music in the external player as usual and set the desired volume. USB : LISTEN TO EXTERNAL AUDIO DEVICES 1. Insert the USB device. 2. Power ON the unit. 3. Press the button on remote control or touch the button on unit repeatedly until " USB " appears on display. 4. Play the music in the external player as usual and set the desired volume. USB NOTE: The USB port can also be used for charging the external device. 20

TROUBLESHOOTING GUIDE Check the following guide before requesting service 6<03720 3266,%/(&$86( 3266,%/(628/7,21 No power power cable not connected ~Check fuse or blown fuse ~Check 12V connection Volume in minimum position Raise volume level by pressing the VOL (Volume) + button No sound Play the music/movie in the connected The connected device is not device as usual and make sure the in playback mode volume level of it is in high level Input source incorrect Press the button repeatedly to set the input source to the desired mode Bass level of the connected Reduce the bass level of the connected device too high device Sound distortion Volume level too high Reduce the volume level by pressing the VOL (Volume ) - button Remote not The batteries are consumed Replace with new batteries working The external device is too far Move the external BT device closer to the from the unit unit Bluetooth reception failure Have not paired Pair both units 21

SPECIFICATIONS Operation Voltage.............................................................................................................DC10V-14V Power Supply Requirement.................................................................DC 12 Volts, Negative Ground Overall Dimension (WMSMCZ3H-SB)............................................741.2(W)x122.0(H)x161.0(D)mm Overall Dimension (WMSMCZ3H)..................................................312.0(W)x122.0(H)x161.0(D)mm Max Power Consumption.............................................................................................................80W Video In Level.................................................................................1 Vp-p/Load impedance:75 ohm Radio Coverage ................................................................................................FM 87.5 -108.0 MHz Bluetooth Effective Range.............................................................................................Up to 30 feet (Measured in open area. Wall and structures may affect the effective range.) Remote Effective Range................................................................................................Up to 16 feet Specifications are subject to change without notice. FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 22

www.riverparkinc.com C 2019 RIVERPARK Inc. V. 051819 伍于计


Document Created: 2019-07-22 11:06:27
Document Modified: 2019-07-22 11:06:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC