RF Exposure Info

FCC ID: OKP8017

RF Exposure Info

Download: PDF
FCCID_2629122

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM150400199303 Fax: +86 (0) 755 2671 0594 Page: 1 of 6 Email: ee.shenzhen@sgs.com 1 Cover page SAR Evaluation Report Application No.: SZEM1504001993CR Applicant: WowWee Group Limited Manufacturer: WowWee Group Limited Factory: Shao Guan Early Light International Co., Ltd Product Name: Roboraptor Blue Model No.(EUT): 8017 Trade Mark: WowWee FCC ID: OKP8017 Standards: 47 CFR Part 1.1307 (2014) 47 CFR Part 2.1093 (2014) KDB447498D01 General RF Exposure Guidance v05r02 Date of Receipt: 2015-04-23 Date of Test: 2015-04-28 to 2015-05-05 Date of Issue: 2015-05-08 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199303 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-05-08 Original Authorized for issue by: 2015-05-05 Tested By (Eric Fu) /Project Engineer Date 2015-05-08 Prepared By (Hedy Wen) /Clerk Date 2015-05-08 Checked By (Emen Li) /Reviewer Date “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199303 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 CLIENT INFORMATION ............................................................................................................................. 4 4.2 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.3 TEST LOCATION .................................................................................................................................... 4 4.4 TEST FACILITY....................................................................................................................................... 5 4.5 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.6 ABNORMALITIES FROM STANDARD CONDITIONS......................................................................................... 5 4.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................. 5 5 SAR EVALUATION................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................. 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199303 Page: 4 of 6 4 General Information 4.1 Client Information Applicant: WowWee Group Limited Address of Applicant: 3/F, Energy Plaza, Suite 301 A-C, 92 Granville Road, T.S.T. East, Hong Kong. Manufacturer: WowWee Group Limited Address of Manufacturer: 3/F, Energy Plaza, Suite 301 A-C, 92 Granville Road, T.S.T. East, Hong Kong. Factory: Shao Guan Early Light International Co., Ltd Address of Factory: XURI Toy industry zone 6km, The western suburbs of Shaoguan City, Guangdong, China 4.2 General Description of EUT Product Name: Roboraptor Blue Model No.: 8017 Trade Mark: WowWee Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V4.0 Single mode Modulation Type: GFSK Number of Channel: 40 Sample Type: Portable production Test Power Grade: Default setting (manufacturer declare ) Test Software of EUT: N/A (manually controlled the EUT to transmit ) Antenna Type: Integral Antenna Gain: 1.5dBi Power Supply: DC 9.0V (6 * 1.5V "AA" Size Battery) 4.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch E&E Lab No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400199303 Page: 5 of 6 4.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • VCCI The 10m Semi-anechoic chamber and Shielded Room (7.5m x 4.0m x 3.0m) of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC – Registration No.: 556682 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 556682. • Industry Canada (IC) Two 3m Semi-anechoic chambers of SGS-CSTC Standards Technical Services Co., Ltd. have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1 & 4620C-2. 4.5 Deviation from Standards None. 4.6 Abnormalities from Standard Conditions None. 4.7 Other Information Requested by the Customer None. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS—CSTC Standards Technical Services Co., Ltd. Report No.: SZEM150400 1ss303 Page: sots 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB4d7ASBDO1 Goneral RF Expocure Guldance vORr02 4.31. Standalone SAR tost sxclusionconsiderations Unless specifealy reauired by the publshed RF exposire KDB procedires, stndalone 114 heselor bay and 10.q axtramiy SAR evaluation for generalpopulation expocure condiions,by messurement or namericasmulation,is ot raquired when the corsponing SAR Exclusion Thresholi condition,lsted belon, is satsfed 5.1.2 Limits "The 1—a and 109 SAR test axclusion threshollsfor 100 MHz to 6 GHzat test separtion ditences £50 mm are detrmined by I(ma ovar of chamnel, ncluding une:up tolerance, miW)/(min.tostseparetion elstanco, mem}]° [M(Ge]]= 2. for 14 SA ands 7. for 10.4 extrority SAR, vhere 1(GHe) is the RF channalransmit eauency in Gz Powar and eistancs are rounded tothe nearest mW and mm betore calcultion"" "The resulis rounded to ons decimal placefor comparison "Thetest oxelusions are applieals only when the minimum test oparation distanceis 5 50 mm and fortransmision frequencios batweon 100 Mz and 8 GHz. When the minimum tes separetion eistance is < 5 mm, distance of 5 mm is applld to datermine SAR tost exclusion 5.1.3EUT RF Exposure "The Mex Conducted Pask Ootput Power is —0 770Bm in Lowest chame}(2402GHz] "The best ease gain of the antonais 1.5081 EIRP~ —0.77d8m + 15081 — 0.73c8m 0790legarthimicterms convertto nimericrosut is nearly 1.18mW According tothe formula. calclate tEIRP tost rosut: [(mas. posar of channal,incluting tne—up tolerance, mW)/(min. tostseparetion alstance, mm]]° M(GHe] Goneral RF Exposure = (1.18mW / 5 mm ) x +2402GHz —0.7 ® SAR reauiremont s—a0 @: ®«@ So the SAR reporis not reguired ~thxdcnent s hnant ty e Cmeoy ue o n Gereat CortrsotSevee n ined ovetat mt on reiet o ccet amorn tm ang ces i anh No ecvane ondceomern whyet t feom ane ces o Ece Carvaene n ‘acasanstecan aderrnn n comn w tenc im o nodenftonanthtwetmnes cnned olen ary HadeoOdiRsnmatoermon afecnte enpae n in i o t eevaa ant uh the taio Cl‘ batuctorn famy Te Censany wreporanly is t ies ant is Gocont cn coreae mm i n Earmacte fomeeneiay l itiardsinpraruoe tavaatn doners Ttavet carioi renadion enon i in MGal itw easponuh Canmay ty Imareandainco fapuy o inbf brcoreitrmemnarc ftinacernenta Enw lssn beprewciestooevenanta ie h k atercce nametr eute own e emoranic th nenoia e nc c mmity e onfi crs on"


Document Created: 2015-05-27 09:59:01
Document Modified: 2015-05-27 09:59:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC