15_LB55932T UserMan-US

FCC ID: OIE55932TR

Users Manual

Download: PDF
FCCID_4256762

STRANGULATION HAZARD － Children have STRANGLED in cords. WARNING Warning Information LB55932T/R Keep this cord out of reach of children (more than 3 feet/1 meter away ＊Keep this instruction manual for from the crib). Never use extension cords with AC adapters. Only use the Adult assembly required. Keep small parts future reference. INSTRUCTION MANUAL WARNING AC Adapters provided. away from children when assembling. ＊For adult use only. 3 Function of keys and LED indicators 4 Start to use monitor Parent Unit Status bar 1 Setup and use your digital video baby monitor Sound Level indicator Power Saving on off status Talk function is activated Temperature alert is activated Installing Baby Unit Visual indicator for sound Steady Green: Power saving mode is activated. Scan view is activated Zoom in is activated picked up from baby unit. Power on off status LED A. Place Baby Unit on a flat surface, such as a desk or shelf or mount the camera on a wall. The louder the sound is Steady Green: Parent Unit is powered on. Monitor is muted Signal strength reference from Baby unit, the more LEDs are light on. Steady Orange: Charging battery. 23 C Baby room temperature CAM1 Camera number Flash Red: Battery Low 1 meter Power Press and hold to switch “On/Off” the Battery level unit. Microphone 23 oC CAM1 POWER VOX Power Saving-on/off mode Screen is switched off to save battery VOL- VOL+ energy. When baby cry loud enough, CAM screen is switched on to display baby’s video. Baby cry level is adjustable from Never place the baby unit or the cord Menu setting (Sensitivity Level L, M, H, within 1 meter of the crib. TALK MENU AUTO). B. Connect the small plug of the power adapter to the Baby Unit and the other end to a suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA). MENU The baby unit is turned on and the power LED will be blue. Press to open and exit menu options. Short cut to switch camera view Press this key to view camera 1, camera 2 and etc. paired camera. Antenna Menu operation Lift up antenna to have better reception of audio and video. Adjust Parent Unit LCD Adjust camera volume : Sound Brightness lighter or darker. level from 1 to 5. USB port Loudspeaker ADD: Add additional camera. Kick Stand Step 1: Move the parent unit to the same area as the camera. Both parent and baby C. Connecting the power supply for the Parent Unit. Flip out the kick stand and place the Parent Unit on a unit are switched on. Reset stable, level surface. Step 2: Select ADD in Menu. The next available camera will automatically be Connect the small plug of the power adapter to the parent unit and the other end to highlighted. Press “Select” to begin pairing. a electrical outlet. Only use the enclosed adapter (5V DC/1000mA). Battery Door HW Reset Step 3: Within 10 seconds, press “Pairing button” of camera. Open the battery door Short press to turn off the parant unit, and need to restart. Recommend charging time of at least 3 hours before first use. to change battery. Step 4: Once successfully paired, the camera light will stop flashing and video will appear on the monitor screen within 20 seconds. VOL- VOL+ Volume down/up Press to decrease and increase volume. Delete: Delete paired camera from the list. SCAN: Display paired camera one by one. Talk Press and hold to talk to baby unit. View: Select and display the camera. USB CHARGING TALK VOX Power Saving-on/off Press to switch on/off Power Saving (voice activation mode). Zoom Out In OK Select Menu mode (Press to select menu option) CAM High: Beep Alarm is issued when room temperature is higher than this setting. Up/Down Menu mode (Press to adjust menu settings) Precaution: use of battery for Parent Unit Low: Beep Alarm is issued when room temperature is lower than this 2 Only charge the battery when the battery life indicator is low. Constant Left/Right Menu mode (Press to adjust menu settings) setting. C: Display temperature in Celsius scale. recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries. Baby Unit F : Display temperature in Fahrenheit scale. When battery is low, the power on off LED (icon) will flash red and on screen Temperature calibration : calibrate room temperature display to your display battery icon will flash red indicating that the battery needs to be standardized one. charged. ON : Activate room temperature alarm function. Antenna :Camera Antenna OFF : Deactivate room temperature alarm function. Loudspeaker Microphone Pairing button USB port Baby’s crying sound level POWER To activate Parent unit from Power saving mode VOX Activation sound level selection in power saving mode. Auto : Learning environment sound and activation. Recommend for VOL- VOL+ CAM users having white noise machine, fans and lulllabies near by. Quiet : Baby cry a little bit to activate the Parent Unit. TALK MENU Room Temperature sensor: Gather room temperature information. Medium: Baby cry moderate to activate the Parent Unit. Loud : Baby cry louder to activate the Parent Unit. Notice: Audio on or off option in power saving mode: Keep audio continuously If you use the parent unit for the first time, when you turn on the parent unit, some boot menus on or OFF when screen is off in power saving mode. will pop-up on the screen, we try to explation status and function on these menus, please Sound Bar : This sound bar is disigned for deaf parents to reflect sound according to the tips to switch to the monitor system interface. When you are fimaliar with Pair Pairing button When camera is powered on, press and hold till power LED starting to blink. level picked up from camera. You can turn visual sound level indication this monitor, you could switch off these on screen tips in menu. on or off. Explanation On/Off : We try to explation status and function on the boot menu. You can turn the explanation on or off based on your usage. WARNING THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION Precautions ·Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrics shock. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the ·When an AC Adapter is plugged into an electrical outlet, do not the exposed end. ·The baby monitor works better in temperature ranging between 0℃ limits for a Class B digital device, pursuant to Part 15 of the FCC interference received, including interference that may cause undesired operation. Rules. These limits are designed to provide reasonable protection ·Test baby monitor before first use, periodically, and when changing location of the baby unit(Camera). and 40℃ (32℉ and 104℉) ·Do not use monitor near water (Such as bathtub, Sink, etc) ·Do not dismantle the appliance. It does not contain any parts that may FCC Caution against harmful interference in a residential installation. be used independently. To assure continued compliance, any changes or modifications not expressly approved by the party This equipment generates, uses and can radiate radio frequency ·Keep parent unit away from heat sources (Such as stoves, radiators, etc) responsible for compliance could void the user's authority to operate this equipment. (Example - energy and, if not installed and used in accordance with the ·Never Expose the baby monitor for long period to sun’s direct rays and ·Make sure there is proper ventilation around baby unit and parent unit. never place it next to a source of heat, in a damp or very dusty room. use only shielded interface cables when connecting to computer or peripheral devices). instructions, may cause harmful interference to radio communica- ·This product is not a toy. Do not allow children to play with it. FCC Radiation Exposure Statement otions. However, there is no guarantee that interference will not ·Never push objects of any kind into this product through openings as occur in a particular installation. If this equipment does cause ·The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall they may touch dangerous voltage points or short-out parts that could This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled harmful interference to radio or television reception, which can be remain readily operable. result in a fire or electric shock. Never spill liquid of any kind on the environment. This equipment should be installed and operated with a minimum distance of 20 determined by turning the equipment off and on, the user is product. centimeters between the radiator and your body. ·The baby monitor should not be considered as a medical device. While using the baby monitor, it is encouraged to try to correct the interference by one of the ·Do not attempt to service this product yourself as opening or This transmitter must not be co-located or operating in conjunction with any other antenna or following measures: strongly recommended to have an adult directly checking on your baby. Premature babies or children removing covers may expose you to dangerous voltage or other hazards. transmitter. . Reorient or relocate the receiving antenna. considered at risk must be supervised by your pediatrician or other medical staff. Refer all servicing to qualified service personnel. The antennas used for this transmitter must be installed to provide a separation distance of at least . Increase the separation between the equipment and receiver. ·The product should be mounted to a wall or ceiling inly as Battery Warning recommended by the manufacturer. 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. ·Use only the original rechargeable battery provided. Industry Canada Statement ·Do not shot-circuit supply terminals. This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause LBTech’s baby monitor warranty policy ·Remove battery when product is stored for long periods of time or when batt ery is exhausted. undesired operation of the device. LBTech will repair or replace (at our option) your unit free of charge ·Dispose of exhausted battery properly. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le ·Keep all batteries away from children. fonctionnement. product must be returned to LBTech together with a copy of the ·The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such IC Radiation Exposure Statement: purchase receipt. In the absence of the purchase receipt, the warranty as vases, shall be placed on the apparatus. This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm will be 12 months from the date of manufacture. This warranty does not between the radiator and your body. apply to normal wear or damage from misuse, abuse, improper storage ·Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement doit êtreinstallé et utilisé avec une distance minimale de 20 centimètres entre le radiateur et votrecorps. Cet and handling, installation, accident, unauthorized repair or alteration. ·Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire émetteur ne doit pas être co-localisées ou opérant en conjoncti on avec autreantenne ou émetteur. Les antennes utilisées pour cet émetteur doivent être installés etfournir une distance de Please contact our Customer service by Facebook LBTech or via or the like. séparation d'au moins 20 centimètre de toute personne et doit pas être co-située ni fonctionner en onjonction avec une autre antenne ou émetteur. email for details.


Document Created: 2018-12-27 10:20:06
Document Modified: 2018-12-27 10:20:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC