Test Report

FCC ID: OHKMCT915B

Test Report

Download: PDF

                                     FCC PART 15 SUBPART C,
                                ISED RSS-210, ISSUE 9, AUGUST 2016
                                TEST AND MEASUREMENT REPORT
                                                                                 For

                                             South Pacific Electronics Ltd
                                                      P.O. Box 9417, Nadi Airport, Nadi, Fiji


                                                         FCC ID: OHKMCT915B
                                                          IC: 3367A-MCT915B

                             Report Type:                                            Product Type:
                                           Original Report                                   Hand Held Transmitter

                                                        Harry Zhao
                                  Prepared By:
                                                        Test Engineer

                              Report Number:
                                                        R1805318-249

                                   Report Date:
                                                        2019-05-13
                                                        Frank Wang
                                  Reviewed By:
                                                       RF Engineer
                                                       Bay Area Compliance Laboratories Corp.
                                                               1274 Anvilwood Avenue,
                                                              Sunnyvale, CA 94089, USA
                                                       Tel: (408) 732-9162, Fax: (408) 732-9164




Note: This test report was prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written
     consent from Bay Area Compliance Laboratories Corp. This test report shall not be used by the customer to claim product certification, approval, or endorsement by
     A2LA or any agency of the United States Government or any foreign government.
*    This test report may contain data and test methods that are not covered by BACL’s scope of accreditation as of the test report date shown above. These items are
     marked within the test report text with an asterisk “*”


South Pacific Electronics Ltd                                                                              FCC ID: OHKMCT915B, IC: 3367A-MCT915B




                                                             TABLE OF CONTENTS

  1 General Description..................................................................................................................................................... 4
  1.1    Product Description for Equipment Under Test (EUT) ...................................................................................... 4
  1.2    Mechanical Description of EUT ......................................................................................................................... 4
  1.3    Objective ............................................................................................................................................................. 4
  1.4    Related Submittal(s)/Grant(s) ............................................................................................................................. 4
  1.5    Test Methodology ............................................................................................................................................... 4
  1.6    Measurement Uncertainty ................................................................................................................................... 4
  2 System Test Configuration.......................................................................................................................................... 8
  2.1    Justification ......................................................................................................................................................... 8
  2.2    EUT Exercise Software....................................................................................................................................... 8
  2.3    Equipment Modifications.................................................................................................................................... 8
  2.4    Local Support Equipment ................................................................................................................................... 8
  2.5    Support Equipment ............................................................................................................................................. 8
  2.6    Interface Ports and Cabling ................................................................................................................................. 8
  3 Summary of Test Results ............................................................................................................................................ 9
  4 FCC §15.203 & ISED RSS-Gen §8.3 - Antenna Requirements ............................................................................... 10
  4.1    Applicable Standards ........................................................................................................................................ 10
  4.2    Antenna Description ......................................................................................................................................... 10
  5 FCC §15.209, §15.249(a) & ISED RSS-210 - Spurious Radiated Emissions .......................................................... 11
  5.1    Applicable Standards ........................................................................................................................................ 11
  5.2    Test Setup ......................................................................................................................................................... 12
  5.3    Test Procedure .................................................................................................................................................. 12
  5.4    Corrected Amplitude & Margin Calculation..................................................................................................... 13
  5.5    Test Equipment List and Details ....................................................................................................................... 13
  5.6    Test Environmental Conditions ........................................................................................................................ 14
  5.7    Summary of Test Results .................................................................................................................................. 14
  5.8    Radiated Emissions Test Results ...................................................................................................................... 15
  6 FCC §15.215 (c) & ISED RSS-Gen §6.6 - Emission Bandwidth .............................................................................. 20
  6.1    Applicable Standards ........................................................................................................................................ 20
  6.2    Measurement Procedure.................................................................................................................................... 20
  6.3    Test Equipment List and Details ....................................................................................................................... 21
  6.4    Test Environmental Conditions ........................................................................................................................ 21
  6.5    Test Results ....................................................................................................................................................... 21
  7 Appendix A - FCC & IC Equipment Labeling Requirements................................................................................. 24
  7.1    FCC ID Label Requirements ............................................................................................................................ 24
  7.2    IC Label Requirements ..................................................................................................................................... 24
  7.3    FCC ID & IC Label Contents and Location...................................................................................................... 25
  8 Appendix B Test Setup and EUT Photos ................................................................................................................... 26
  9 Appendix C (Informative) - A2LA Electrical Testing Certificate ........................................................................... 27




Report Number: R1805318-249                                                      Page 2 of 27                     FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                    FCC ID: OHKMCT915B, IC: 3367A-MCT915B




                                DOCUMENT REVISION HISTORY

         Revision Number         Report Number          Description of Revision      Date of Revision

                 0                R1805318-249              Original Report            2019-05-13




Report Number: R1805318-249                      Page 3 of 27         FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                         FCC ID: OHKMCT915B, IC: 3367A-MCT915B


1     General Description

1.1    Product Description for Equipment Under Test (EUT)

This test and measurement report was prepared on behalf of South Pacific Electronics Ltd. and their product
model: MCT91503 (FCC ID: OHKMCT915B, IC: 3367A-MCT915B) or the “EUT” as referred to in this report.
It is a Hand Held Transmitter.


1.2    Mechanical Description of EUT

The EUT measures approximately 60 mm (L) x 38 mm (W) x 10 mm (H) and weighs approximately 0.029 kg.

The test data gathered are from typical production sample, serial number: R1805318-01 assigned by BACL.


1.3    Objective

This report is prepared on behalf of South Pacific Electronics Ltd, in accordance with Part 2, Subpart J, and Part
15, Subparts B and C of the Federal Communication Commission’s rules and ISED RSS-210 Issue 9, AUG
2016.

The objective is to determine compliance with FCC Part 15.249 and ISED RSS-210 rules for AC Conducted
Emissions, Antenna Requirements, Occupied Bandwidth, and Radiated Spurious Emissions.


1.4    Related Submittal(s)/Grant(s)

N/A


1.5    Test Methodology

All measurements contained in this report were conducted in accordance with ANSI C63.10-2013, American
National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices.


1.6    Measurement Uncertainty

All measurements involve certain levels of uncertainties, especially in the field of EMC. The factors
contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity,
antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation,
measurement distance variation, site imperfections, mismatch (average), and system repeatability.




Report Number: R1805318-249                          Page 4 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                         FCC ID: OHKMCT915B, IC: 3367A-MCT915B



                                       Parameter                Measurement uncertainty
                              Occupied Channel Bandwidth                 ±5 %
                               RF output power, conducted              ±0.57 dB
                            Power Spectral Density, conducted          ±1.48dB
                             Unwanted Emissions, conducted             ±1.57dB
                                 All emissions, radiated               ±4.0 dB
                            AC power line Conducted Emission           ±2.0 dB
                                      Temperature                       ±2 º C
                                        Humidity                         ±5 %
                             DC and low frequency voltages              ±1.0 %
                                          Time                           ±2 %
                                       Duty Cycle                        ±3 %



1.7    Test Facility Registrations

BACLs test facilities that are used to perform Radiated and Conducted Emissions tests are currently recognized
by the Federal Communications Commission as Accredited with NIST Designation Number US1129.
BACL’s test facilities that are used to perform Radiated and Conducted Emissions tests are currently registered
with Industry Canada under Registration Numbers: 3062A-1, 3062A-2, and 3062A-3.
BACL is a Chinese Taipei Bureau of Standards Metrology and Inspection (BSMI) validated Conformity
Assessment Body (CAB), under Appendix B, Phase I Procedures of the APEC Mutual Recognition
Arrangement (MRA). BACL’s BSMI Lab Code Number is: SL2-IN-E-1002R
BACL’s test facilities that are used to perform AC Line Conducted Emissions, Telecommunications Line
Conducted Emissions, Radiated Emissions from 30 MHz to 1 GHz, and Radiated Emissions from 1 GHz to 6
GHz are currently recognized as Accredited in accordance with the Voluntary Control Council for Interference
[VCCI] Article 15 procedures under Registration Number A-0027.


1.8    Test Facility Accreditations

Bay Area Compliance Laboratories Corp. (BACL) is:
A- An independent, 3rd-Party, Commercial Test Laboratory accredited to ISO/IEC 17025:2005 by A2LA (Test
Laboratory Accreditation Certificate Number 3279.02), in the fields of: Electromagnetic Compatibility and
Telecommunications. Unless noted by an Asterisk (*) in the Compliance Matrix (See Section 3 of this Test
Report), BACL’s ISO/IEC 17025:2005 Scope of Accreditation includes all of the Test Method Standards and/or
the Product Family Standards detailed in this Test Report..
BACL’s ISO/IEC 17025:2005 Scope of Accreditation includes a comprehensive suite of EMC Emissions, EMC
Immunity, Radio, RF Exposure, Safety and wireline Telecommunications test methods applicable to a wide
range of product categories. These product categories include Central Office Telecommunications Equipment
[including NEBS - Network Equipment Building Systems], Unlicensed and Licensed Wireless and RF devices,
Information Technology Equipment (ITE); Telecommunications Terminal Equipment (TTE); Medical Electrical
Equipment; Industrial, Scientific and Medical Test Equipment; Professional Audio and Video Equipment;
Industrial and Scientific Instruments and Laboratory Apparatus; Cable Distribution Systems, and Energy
Efficient Lighting.



Report Number: R1805318-249                          Page 5 of 27         FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                    FCC ID: OHKMCT915B, IC: 3367A-MCT915B



B- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body
Accreditation Certificate Number 3279.03) to certify
- For the USA (Federal Communications Commission):
         1-      All Unlicensed radio frequency devices within FCC Scopes A1, A2, A3, and A4;
         2-      All Licensed radio frequency devices within FCC Scopes B1, B2, B3, and B4;
         3-      All Telephone Terminal Equipment within FCC Scope C.
- For the Canada (Industry Canada):
         1      All Scope 1-Licence-Exempt Radio Frequency Devices;
         2      All Scope 2-Licensed Personal Mobile Radio Services;
         3      All Scope 3-Licensed General Mobile and Fixed Radio Services;
         4      All Scope 4-Licensed Maritime and Aviation Radio Services;
         5      All Scope 5-Licensed Fixed Microwave Radio Services
         6      All Broadcasting Technical Standards (BETS) in the Category I Equipment Standards List.
- For Singapore (Info-Communications Development Authority (IDA)):
         1      All Line Terminal Equipment: All Technical Specifications for Line Terminal Equipment –
                Table 1 of IDA MRA Recognition Scheme: 2011, Annex 2
         2.     All Radio-Communication Equipment: All Technical Specifications for Radio-Communication
                Equipment – Table 2 of IDA MRA Recognition Scheme: 2011, Annex 2
- For the Hong Kong Special Administrative Region:
         1      All Radio Equipment, per KHCA 10XX-series Specifications;
         2      All GMDSS Marine Radio Equipment, per HKCA 12XX-series Specifications;
         3      All Fixed Network Equipment, per HKCA 20XX-series Specifications.
- For Japan:
         1      MIC Telecommunication Business Law (Terminal Equipment):
               - All Scope A1 - Terminal Equipment for the Purpose of Calls;
               - All Scope A2 - Other Terminal Equipment
         2      Radio Law (Radio Equipment):
               - All Scope B1 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 1 of
                       the Radio Law
               - All Scope B2 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 2 of
                       the Radio Law
               - All Scope B3 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 3 of
                       the Radio Law
C- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body
Accreditation Certificate Number 3279.01) to certify Products to USA’s Environmental Protection Agency
(EPA) ENERGY STAR Product Specifications for:
         1 Electronics and Office Equipment:
            - for Telephony (ver. 3.0)
            - for Audio/Video (ver. 3.0)
            - for Battery Charging Systems (ver. 1.1)
            - for Set-top Boxes and Cable Boxes (ver. 4.1)
            - for Televisions (ver. 6.1)
            - for Computers (ver. 6.0)
            - for Displays (ver. 6.0)
            - for Imaging Equipment (ver. 2.0)
            - for Computer Servers (ver. 2.0)
         2 Commercial Food Service Equipment
            - for Commercial Dishwashers (ver. 2.0)
            - for Commercial Ice Machines (ver. 2.0)
            - for Commercial Ovens (ver. 2.1)



Report Number: R1805318-249                      Page 6 of 27         FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                  FCC ID: OHKMCT915B, IC: 3367A-MCT915B


            -  for Commercial Refrigerators and Freezers
        3   Lighting Products
           - For Decorative Light Strings (ver. 1.5)
           - For Luminaires (including sub-components) and Lamps (ver. 1.2)
           - For Compact Fluorescent Lamps (CFLs) (ver. 4.3)
           - For Integral LED Lamps (ver. 1.4)
        4 Heating, Ventilation, and AC Products
          - for Residential Ceiling Fans (ver. 3.0)
          - for Residential Ventilating Fans (ver. 3.2)
        5 Other
         - For Water Coolers (ver. 3.0)
D- A NIST Designated Phase-I and Phase-II Conformity Assessment Body (CAB) for the following
economies and regulatory authorities under the terms of the stated MRAs/Treaties:
   - -         Australia: ACMA (Australian Communication and Media Authority) – APEC Tel MRA -Phase
       I;
   - -          Canada: (Innovation, Science and Economic development Canada - ISEDC) Foreign
       Certification Body – FCB – APEC Tel MRA -Phase I & Phase II;
   - -         Chinese Taipei (Republic of China – Taiwan):
   - o         BSMI (Bureau of Standards, Metrology and Inspection) APEC Tel MRA -Phase I;
   - o         NCC (National Communications Commission) APEC Tel MRA -Phase I;
   - -          European Union:
   - o         EMC Directive 2014/30/EU US-EU EMC & Telecom MRA CAB (NB)
   - o         Radio Equipment (RE) Directive 2014/53/EU US-EU EMC & Telecom MRA CAB (NB)
   - o         Low Voltage Directive (LVD) 2014/35/EU
   - -         Hong Kong Special Administrative Region: (Office of the Telecommunications Authority –
       OFTA)
   -      APEC Tel MRA -Phase I & Phase II
   - -         Israel – US-Israel MRA Phase I
   - -         Republic of Korea (Ministry of Communications - Radio Research Laboratory) APEC Tel
       MRA -Phase I
   - -         Singapore: (Infocomm Media Development Authority - IMDA) APEC Tel MRA -Phase I &
       Phase II;
   - -         Japan: VCCI - Voluntary Control Council for Interference US-Japan Telecom Treaty VCCI
       Side Letter-
   - -         USA:
   - o         ENERGY STAR Recognized Test Laboratory – US EPA
   - o         Telecommunications Certification Body (TCB) – US FCC;
   - o         Nationally Recognized Test Laboratory (NRTL) – US OSHA
   - -         Vietnam: APEC Tel MRA -Phase I;




Report Number: R1805318-249                     Page 7 of 27       FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                        FCC ID: OHKMCT915B, IC: 3367A-MCT915B


2     System Test Configuration

2.1    Justification
The EUT was configured for testing according to ANSI C63.10-2013.

The EUT was tested in a testing mode to represent worst-case results during the final qualification test.


2.2    EUT Exercise Software
No software was used for testing.


2.3    Equipment Modifications

N/A


2.4    Local Support Equipment

No local support equipment was used for testing.


2.5    Support Equipment

No support equipment was used for testing.


2.6    Interface Ports and Cabling

No interface ports and cabling were used for testing.




Report Number: R1805318-249                         Page 8 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                           FCC ID: OHKMCT915B, IC: 3367A-MCT915B


3    Summary of Test Results

Results reported relate only to the product tested.


              FCC & ISED Rules                         Description of Test                    Results

                 FCC §15.203
                                                      Antenna Requirement                    Compliant
              ISED RSS-Gen §8.3
                 FCC §15.207
                                                AC Line Conducted Emissions               Not Applicable*
               IC RSS-Gen §8.8
             FCC §2.1053, §15.205,
              §15.209, §15.249 (a)               Radiated Spurious Emissions                 Compliant
                ISED RSS-210
                 FCC §15.215
                                                      Emission Bandwidth                     Compliant
              ISED RSS-Gen §6.6

*: EUT is battery powered, the AC line Conducted Emissions is not required.




Report Number: R1805318-249                            Page 9 of 27           FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                         FCC ID: OHKMCT915B, IC: 3367A-MCT915B


4     FCC §15.203 & ISED RSS-Gen §8.3 - Antenna Requirements

4.1    Applicable Standards

According to FCC §15.203:

An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible
party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a
unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this
Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use
of a standard antenna jack or electrical connector is prohibited.

According to ISED RSS-Gen §8.3: Transmitter Antenna

The applicant for equipment certification, as per RSP-100, must provide a list of all antenna types that may be
used with the license-exempt transmitter, indicating the maximum permissible antenna gain (in dBi) and the
required impedance for each antenna.

License-exempt transmitters that have received equipment certification may operate with different types of
antennas. However, it is not permissible to exceed the maximum equivalent isotropically radiated power
(e.i.r.p.) limits specified in the applicable standard (RSS) for the license-exempt apparatus.

Testing shall be performed using the highest gain antenna of each combination of license-exempt transmitter
and antenna type, with the transmitter output power set at the maximum level. 9 When a measurement at the
antenna connector is used to determine RF output power, the effective gain of the device’s antenna shall be
stated, based on a measurement or on data from the antenna manufacturer.
User manuals for transmitters equipped with detachable antennas shall also contain the following notice in a
conspicuous location:
This radio transmitter (identify the device by certification number) has been approved by Industry Canada to
operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.

Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved for
use with the transmitter, indicating the maximum permissible antenna gain (in dBi).


4.2    Antenna Description

      The antenna used by the EUT is a PCB antenna.




Report Number: R1805318-249                          Page 10 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                         FCC ID: OHKMCT915B, IC: 3367A-MCT915B


5     FCC §15.209, §15.249(a) & ISED RSS-210 - Spurious Radiated Emissions
5.1    Applicable Standards

As per FCC §15.35(d): Unless otherwise specified, on any frequency or frequencies above 1000 MHz, the
radiated emission limits are based on the use of measurement instrumentation employing an average detector
function. Unless otherwise specified, measurements above 1000 MHz shall be performed using a minimum
resolution bandwidth of 1 MHz.

As Per FCC §15.205(a) and RSS-Gen except as show in paragraph (d) of this section, only spurious emissions
are permitted in any of the frequency bands listed below:

                MHz                      MHz                         MHz                         GHz

            0.090 – 0.110             16.42 – 16.423
                                                                    960 – 1240               4. 5 – 5. 15
            0.495 – 0.505          16.69475 – 16.69525
                                                                   1300 – 1427              5. 35 – 5. 46
           2.1735 – 2.1905              25.5 – 25.67
                                                                  1435 – 1626.5              7.25 – 7.75
            4.125 – 4.128               37.5 – 38.25
                                                                 1645.5 – 1646.5             8.025 – 8.5
          4.17725 – 4.17775              73 – 74.6
                                                                   1660 – 1710                9.0 – 9.2
          4.20725 – 4.20775             74.8 – 75.2
                                                                 1718.8 – 1722.2              9.3 – 9.5
            6.215 – 6.218              108 – 121.94
                                                                   2200 – 2300               10.6 – 12.7
          6.26775 – 6.26825              123 – 138
                                                                   2310 – 2390              13.25 – 13.4
          6.31175 – 6.31225           149.9 – 150.05
                                                                  2483.5 – 2500             14.47 – 14.5
            8.291 – 8.294         156.52475 – 156.52525
                                                                   2690 – 2900              15.35 – 16.2
            8.362 – 8.366              156.7 – 156.9
                                                                   3260 – 3267               17.7 – 21.4
          8.37625 – 8.38675         162.0125 –167.17
                                                                  3.332 – 3.339             22.01 – 23.12
          8.41425 – 8.41475           167.72 – 173.2
                                                                  3 3458 – 3 358             23.6 – 24.0
            12.29 – 12.293               240 – 285
                                                                  3.600 – 4.400              31.2 – 31.8
         12.51975 – 12.52025            322 – 335.4
                                                                                            36.43 – 36.5
         12.57675 – 12.57725            399.9 – 410
                                                                                             Above 38.6
            13.36 – 13.41                608 – 614


As per FCC §15.209(a): Except as provided elsewhere in this Subpart, the emissions from an intentional radiator
shall not exceed the field strength levels specified in the following table

                  Frequency                      Field Strength                    Measurement Distance
                    (MHz)                      (micro volts/meter)                       (meters)
                 0.009 - 0.490                     2400/F(kHz)                             300
                 0.490 - 1.705                    24000/F(kHz)                             30
                 1.705 - 30.0                             30                               30
                    30 - 88                           100**                                 3
                   88 - 216                           150**                                 3
                  216 - 960                           200**                                 3
                  Above 960                               500                               3

** Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this
Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz.
However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections
15.231 and 15.241.




Report Number: R1805318-249                         Page 11 of 27           FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                      FCC ID: OHKMCT915B, IC: 3367A-MCT915B


As per FCC §15.249(a) and RSS-210 Annex 2 section A2.9: Except as provided in paragraph (b) of this section,
the field strength of emissions from intentional radiators operated within these frequency bands shall comply
with the following:

                  Frequency              Field Strength of Fundamental      Field Strength of Harmonics
                    (MHz)                       (millivolts/meter)               (microvolts/meter)
                   902-928                            50                                500
                 2400-2483.5                          50                                500
                  5725-5875                           50                                500
                 24000-24250                          250                              2500



5.2    Test Setup

The radiated emissions tests were performed in the 5-meter Chamber, using the setup in accordance with ANSI
C63.10-2013. The specification used was FCC 15 Subpart C limits.

The spacing between the peripherals was 10 centimeters.

External I/O cables were draped along the edge of the test table and bundle when necessary.


5.3    Test Procedure

For the radiated emissions test, the EUT host, and all support equipment power cords were connected to the AC
floor outlet.

Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all
installation combinations.

The EUT was set 3 meter away from the testing antenna, which was varied from 1-4 meter, and the EUT was
placed on a turntable, which was 0.8 meter and 1.5 meter above the ground plane for below and above 1000
MHz measurements, the table shall be rotated for 360 degrees to find out the highest emission. The receiving
antenna’s polarity should be changed between horizontal and vertical.

The spectrum analyzer or receiver was set as:

Below 1000 MHz:

                  RBW = 100 kHz / VBW = 300 kHz / Sweep = Auto

Above 1000 MHz:

                   (1) Peak: RBW = 1MHz / VBW = 1MHz / Sweep = Auto
                   (2) Average: RBW = 1/T Hz / Sweep = Auto




Report Number: R1805318-249                        Page 12 of 27         FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                           FCC ID: OHKMCT915B, IC: 3367A-MCT915B


5.4     Corrected Amplitude & Margin Calculation

The Corrected Amplitude (CA) is calculated by adding the Antenna Factor (AF), the Cable Loss (CL), the
Attenuator Factor (Atten) and subtracting the Amplifier Gain (Ga) to indicated Amplitude (Ai) reading. The
basic equation is as follows:

         CA = Ai + AF + CL + Atten – Ga
For example, a corrected amplitude of 40.3 dBuV/m = Indicated Reading (32.5 dBuV) + Antenna Factor
(+23.5dB) + Cable Loss (3.7 dB) + Attenuator (10 dB) - Amplifier Gain (29.4 dB)
The “Margin” column of the following data tables indicates the degree of compliance within the applicable
limit. For example, a margin of -7 dB means the emission is 7 dB below the maximum limit. The equation for
margin calculation is as follows:

         Margin = Corrected Amplitude – Limit


5.5     Test Equipment List and Details

                                                                                        Calibration    Calibration
        Manufacturer             Description           Model No.         Serial No.
                                                                                           Date         Interval
                                                        ESCI
      Rohde and Schwarz     Receiver, EMI Test                             100338       2018-07-05        2 years
                                                     1166.5950.03
           Agilent          Analyzer, Spectrum         E4446A           US44300386      2018-06-01        1 year
      Sunol Science Corp     System Controller          SC99V             011003-1          N/R            N/R
        Sunol Sciences     Antenna, Biconi-Log            JB1            A013105-3      2018-02-26        2 years
           EMCO                 Antenna, Horn             3115           9511-4627      2018-03-28        2 years
           Agilent             Amplifier, Pre           8449D           2944A10187      2018-04-02        1 year
                           2.92mm (M) X2, 1501       KPS-1501AN-
      Insulated Wire INC                                                  DC 1807       2018-03-13        1 year
                           Armor Neoprene, 396"       3960-KPS
              -                 SMA cable                 -                C0002         Each time1        N/A
                                                                                                  1
              -                 N-Type Cable                -              C00012        Each time         N/A
              -                 N-Type Cable                -              C00014        Each time1        N/A
             HP                 Pre-Amplifier            8449B          3147A00400      2018-02-02        1 year
           Vasona               Test software        V6.0 build 11        10400213          N/R            N/R

Note1: cable included in the test set-up will be checked each time before testing.
Statement of Traceability: BACL attests that all calibrations have been performed per the A2LA requirements, traceable
to NIST.




Report Number: R1805318-249                            Page 13 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                           FCC ID: OHKMCT915B, IC: 3367A-MCT915B


5.6    Test Environmental Conditions

              Temperature:                20-22 ºC
         Relative Humidity:               42-50 %
             ATM Pressure:                102.7 kPa

The testing was performed by Harry Zhao on 2018-11-19 and 2018-11-26 in 5m chamber 3.


5.7    Summary of Test Results

According to the data hereinafter, the EUT complied with FCC Title 47, Part 15C and ISED RSS-210 standard’s
radiated emissions limits, and had the worst margin of:

      Mode: Transmitting
                    Margin                             Frequency
                                                                                  Polarization (Horizontal/Vertical)
                     (dB)                                (MHz)

                     -2.35                              4604.042                              Horizontal


Please refer to the following table and plots for specific test result details




Report Number: R1805318-249                            Page 14 of 27             FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                    FCC ID: OHKMCT915B, IC: 3367A-MCT915B


5.8     Radiated Emissions Test Results

1) 30 MHz – 1 GHz Worst Case on Low Channel (915.27788 MHz), measured at 3 meters




                                                     Fundamental Frequency with filter




                    Corrected   Antenna   Antenna     Turntable
      Frequency                                                           Limit          Margin
                    Amplitude    Height   Polarity    Azimuth                                     Comment
        (MHz)                                                           (dBµV/m)          (dB)
                    (dBµV/m)      (cm)     (H/V)      (degrees)
      119.9715         28.84      128        V             87               43.5         -14.66     QP
         30            23.18      100        V            294                40          -16.82     QP
      136.3565         20.69      124        V             62               43.5         -22.81     QP
      122.2155         12.06      226        V            186               43.5         -31.44     QP
       32.2145         11.15      286        V            237                40          -28.85     QP
      80.00025         11.56      108        H            167                40          -28.44     QP




Report Number: R1805318-249                   Page 15 of 27             FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                        FCC ID: OHKMCT915B, IC: 3367A-MCT915B



2) 900 MHz –25 GHz Measured at 3 meters

            S.A.  Turntable           Test Antenna       Cable   Pre-       Cord.         FCC/IC
Frequency
          Reading Azimuth       Height Polarity Factor   Loss    Amp.      Reading   Limit    Margin   Comments
  (MHz)
          (dBµV) (degrees)       (cm)    (H/V) (dB/m)    (dB)    (dB)     (dBµV/m) (dBµV/m)    (dB)
                                                 915.27788 MHz
915.2779     78.40      306     100      H      29.60    2.33    20.449    89.88    114.00    -24.12      PK
915.2779     78.20      306     100      H      29.60    2.33    20.449    89.68    94.00     -4.32       AV
915.2779     66.95      169     151      V      29.60    2.33    20.449    78.43    114.00    -35.57      PK
915.2779     66.78      169     151      V      29.60    2.33    20.449    78.26    94.00     -15.74      AV
   902       28.14      306     100      H      29.60    2.33    20.449    39.62    74.00     -34.38      PK
   902       18.62      306     100      H      29.60    2.33    20.449    30.10    54.00     -23.90      AV
   902       29.14      169     151      V      29.60    2.33    20.449    40.62    74.00     -33.38      PK
   902       18.60      169     151      V      29.60    2.33    20.449    30.08    54.00     -23.92      AV
1830.556     47.48       0      100      H      27.28    4.26    32.077    46.94    74.00     -27.06      PK
1830.556     37.35       0      100      H      27.28    4.26    32.077    36.81    54.00     -17.19      AV
1830.556     49.71      140     230      V      27.28    4.26    32.077    49.17    74.00     -24.83      PK
1830.556     43.09      140     230      V      27.28    4.26    32.077    42.55    54.00     -11.45      AV
2745.834     53.01      269     268      H      29.20    5.56    32.413    55.36    74.00     -18.64      PK
2745.834     49.09      269     268      H      29.20    5.56    32.413    51.44    54.00     -2.56       AV
2745.834     49.54      355     100      V      29.14    5.56    32.413    51.83    74.00     -22.17      PK
2745.834     43.55      355     100      V      29.14    5.56    32.413    45.84    54.00     -8.16       AV
3661.112     46.20      213     275      H      31.85    6.51    32.638    51.93    74.00     -22.07      PK
3661.112     38.97      213     275      H      31.85    6.51    32.638    44.70    54.00     -9.30       AV
3661.112     45.97       0      100      V      31.79    6.51    32.638    51.63    74.00     -22.37      PK
3661.112     39.33       0      100      V      31.79    6.51    32.638    44.99    54.00     -9.01       AV
4576.389     49.56      263     242      H      32.29    7.22    32.993    56.07    74.00     -17.93      PK
4576.389     44.57      263     242      H      32.29    7.22    32.993    51.08    54.00     -2.92       AV
4576.389     46.73       0      100      V      32.24    7.22    32.993    53.19    74.00     -20.81      PK
4576.389     36.73       0      100      V      32.24    7.22    32.993    43.19    54.00     -10.81      AV




Report Number: R1805318-249                         Page 16 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                       FCC ID: OHKMCT915B, IC: 3367A-MCT915B



            S.A.  Turntable           Test Antenna       Cable   Pre-       Cord.         FCC/IC
Frequency
          Reading Azimuth       Height Polarity Factor   Loss    Amp.      Reading   Limit    Margin    Comments
  (MHz)
          (dBµV) (degrees)       (cm)    (H/V) (dB/m)    (dB)    (dB)     (dBµV/m) (dBµV/m)    (dB)
                                                  920.8084 MHz
920.8084     78.41       306     100      H      29.60    2.33   20.449     89.89   114.00     -24.11      PK
920.8084     78.13       306     100      H      29.60    2.33   20.449     89.61    94.00     -4.39       AV
920.8084     62.70       142     148      V      29.60    2.33   20.449     74.18   114.00     -39.82      PK
920.8084     62.34       142     148      V      29.60    2.33   20.449     73.82    94.00     -20.18      AV
1841.617     47.86        0      100      H      27.28    4.26   32.077     47.32    74.00     -26.68      PK
1841.617     38.38        0      100      H      27.28    4.26   32.077     37.84    54.00     -16.16      AV
1841.617     50.39       114     192      V      27.28    4.26   32.077     49.85    74.00     -24.15      PK
1841.617     43.25       114     192      V      27.28    4.26   32.077     42.71    54.00     -11.29      AV
2762.425     52.22       282     267      H      29.20    5.56   32.413     54.57    74.00     -19.43      PK
2762.425     48.65       282     267      H      29.20    5.56   32.413     51.00    54.00     -3.00       AV
2762.425     50.50       279     288      V      29.14    5.56   32.413     52.79    74.00     -21.21      PK
2762.425     44.86       279     288      V      29.14    5.56   32.413     47.15    54.00     -6.85       AV
3683.234     47.17       281     231      H      32.24    6.51   32.638     53.29    74.00     -20.71      PK
3683.234     40.82       231     281      H      32.24    6.51   32.638     46.94    54.00     -7.06       AV
3683.234     47.94       100     255      V      32.14    6.51   32.638     53.95    74.00     -20.05      PK
3683.234     41.67       100     255      V      32.14    6.51   32.638     47.68    54.00     -6.32       AV
4604.042     49.55       218     275      H      32.29    7.22   32.993     56.06    74.00     -17.94      PK
4604.042     45.14       218     275      H      32.29    7.22   32.993     51.65    54.00     -2.35       AV
4604.042     47.38       40      169      V      32.24    7.22   32.993     53.84    74.00     -20.16      PK
4604.042     39.94       40      169      V      32.24    7.22   32.993     46.40    54.00     -7.60       AV




Report Number: R1805318-249                         Page 17 of 27           FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                        FCC ID: OHKMCT915B, IC: 3367A-MCT915B



            S.A.  Turntable           Test Antenna       Cable   Pre-       Cord.         FCC/IC
Frequency
          Reading Azimuth       Height Polarity Factor   Loss    Amp.      Reading   Limit    Margin    Comments
  (MHz)
          (dBµV) (degrees)       (cm)    (H/V) (dB/m)    (dB)    (dB)     (dBµV/m) (dBµV/m)    (dB)
                                                  926.0308 MHz
926.0308     79.38       300     100      H      29.60    2.33   20.449     90.86   114.00     -23.14      PK
926.0308     79.14       300     100      H      29.60    2.33   20.449     90.62    94.00     -3.38       AV
926.0308     69.52       191     143      V      29.60    2.33   20.449     81.00   114.00     -33.00      PK
926.0308     69.34       191     143      V      29.60    2.33   20.449     80.82    94.00     -13.18      AV
   928       28.48       306     100      H      29.60    2.33   20.449     39.96    74.00     -34.04      PK
   928       18.78       306     100      H      29.60    2.33   20.449     30.26    54.00     -23.74      AV
   928       29.04       191     143      V      29.60    2.33   20.449     40.52    74.00     -33.48      PK
   928       18.42       191     143      V      29.60    2.33   20.449     29.90    54.00     -24.10      AV
1852.062     47.82        0      266      H      27.28    4.26   32.077     47.28    74.00     -26.72      PK
1852.062     37.97        0      266      H      27.28    4.26   32.077     37.43    54.00     -16.57      AV
1852.062     50.16       99      219      V      27.28    4.26   32.077     49.62    74.00     -24.38      PK
1852.062     42.99       99      219      V      27.28    4.26   32.077     42.45    54.00     -11.55      AV
2778.092     51.97       284     240      H      29.26    5.56   32.413     54.38    74.00     -19.62      PK
2778.092     48.07       284     240      H      29.26    5.56   32.413     50.48    54.00     -3.52       AV
2778.092     49.97       280     260      V      29.22    5.56   32.413     52.34    74.00     -21.66      PK
2778.092     43.40       280     260      V      29.22    5.56   32.413     45.77    54.00     -8.23       AV
3704.123     46.40       225     247      H      32.24    6.51   32.638     52.52    74.00     -21.48      PK
3704.123     39.73       225     247      H      32.24    6.51   32.638     45.85    54.00     -8.15       AV
3704.123     48.16       103     252      V      32.14    6.51   32.638     54.17    74.00     -19.83      PK
3704.123     41.84       103     252      V      32.14    6.51   32.638     47.85    54.00     -6.15       AV
4630.154     48.83       260     253      H      32.37    7.22   32.993     55.42    74.00     -18.58      PK
4630.154     44.79       260     253      H      32.37    7.22   32.993     51.38    54.00     -2.62       AV
4630.154     46.38       320     281      V      32.16    7.22   32.993     52.77    74.00     -21.23      PK
4630.154     39.95       320     281      V      32.16    7.22   32.993     46.34    54.00     -7.66       AV




Report Number: R1805318-249                         Page 18 of 27           FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                   FCC ID: OHKMCT915B, IC: 3367A-MCT915B


1 GHz-18 GHz




Report Number: R1805318-249     Page 19 of 27       FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                        FCC ID: OHKMCT915B, IC: 3367A-MCT915B


6     FCC §15.215 (c) & ISED RSS-Gen §6.6 - Emission Bandwidth

6.1    Applicable Standards
As per FCC §15.215 (c),

Intentional radiators operating under the alternative provisions to the general emission limits, as contained in
§§15.217 through 15.257 and in subpart E of this part, must be designed to ensure that the 20 dB bandwidth of
the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the
equipment operates, is contained within the frequency band designated in the rule section under which the
equipment is operated. In the case of intentional radiators operating under the provisions of subpart E, the
emission bandwidth may span across multiple contiguous frequency bands identified in that subpart. The
requirement to contain the designated bandwidth of the emission within the specified frequency band includes
the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed
as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage.
If a frequency stability is not specified in the regulations, it is recommended that the fundamental emission be
kept within at least the central 80% of the permitted band in order to minimize the possibility of out-of-band
operation.

As per ISED RSS-Gen §6.6,

The emission bandwidth (×dB) is defined as the frequency range between two points, one above and one below
the carrier frequency, at which the spectral density of the emission is attenuated × dB below the maximum in-
band spectral density of the modulated signal. Spectral density (power per unit bandwidth) is to be measured
with a detector of resolution bandwidth in the range of 1% to 5% of the anticipated emission bandwidth, and a
video bandwidth at least 3× the resolution bandwidth.
When the occupied bandwidth limit is not stated in the applicable RSS or reference measurement method, the
transmitted signal bandwidth shall be reported as the 99% emission bandwidth, as calculated or measured.


6.2    Measurement Procedure
The transmitter shall be operated at its maximum carrier power measured under normal test conditions.

The span of the analyzer shall be set to capture all products of the modulation process, including the emission
skirts.

The resolution bandwidth (RBW) shall be in the range of 1% to 5% of the occupied bandwidth (OBW) and
video bandwidth (VBW) shall be approximately 3×RBW.

Note: Video averaging is not permitted.

A peak, or peak hold, may be used in place of the sampling detector as this may produce a wider bandwidth than
the actual bandwidth (worst-case measurement). Use of a peak hold may be necessary to determine the occupied
bandwidth if the device is not transmitting continuously.

The trace data points are recovered and are directly summed in linear power level terms. The recovered
amplitude data points, beginning at the lowest frequency, are placed in a running sum until 0.5% of the total is
reached and that frequency recorded. The process is repeated for the highest frequency data points (starting at
the highest frequency, at the right side of the span, and going down in frequency). This frequency is then
recorded.

The difference between the two recorded frequencies is the 99% occupied bandwidth.




Report Number: R1805318-249                         Page 20 of 27          FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                                 FCC ID: OHKMCT915B, IC: 3367A-MCT915B



6.3    Test Equipment List and Details

                                                                                               Calibration    Calibration
      Manufacturer               Description               Model No.          Serial No.
                                                                                                  Date         Interval

         Agilent           Analyzer, Spectrum               E4446A           US44300386        2018-06-01       1 year

         EMCO                   Antenna, Horn                3115             9511-4627        2018-03-28       2 years

            -                     RF Cable                     -                   -            Each time1       N/A

         Agilent                Amplifier, Pre              8449D            2944A10187        2018-04-02       1 year

Note1: cable included in the test set-up will be checked each time before testing.
Statement of Traceability: BACL Corp. attests that all calibrations have been performed per the A2LA requirements,
traceable to the NIST.


6.4    Test Environmental Conditions

                Temperature:                     22º C
         Relative Humidity:                      42 %
             ATM Pressure:                     102.7 KPa

The testing was performed by Harry Zhao on 2018-11-29 in RF site.


6.5    Test Results

           Frequency Range                   Frequency                      99% OBW
                                                                                                  20 dB Bandwidth
                (MHz)                          (MHz)                          (kHz)
                                                                                                 Within the 902-928
                                               915.27788                     96.8618
                                                                                                MHz frequency band
                                                                                                Within the 902-928
                 902-928                       920.8084                      96.4845
                                                                                                MHz frequency band
                                                                                                Within the 902-928
                                               926.0308                      96.5177
                                                                                                MHz frequency band

Please refer to the following plots for detailed test results.




Report Number: R1805318-249                                 Page 21 of 27              FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                   FCC ID: OHKMCT915B, IC: 3367A-MCT915B


                                99% Occupied Bandwidth & 20 dB bandwidth

                                             915.27788 MHz




                                             920.8084 MHz




Report Number: R1805318-249                     Page 22 of 27       FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                     FCC ID: OHKMCT915B, IC: 3367A-MCT915B



                                926.0308 MHz




Report Number: R1805318-249       Page 23 of 27       FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                                FCC ID: OHKMCT915B, IC: 3367A-MCT915B


7     Appendix A - FCC & IC Equipment Labeling Requirements
7.1       FCC ID Label Requirements
As per FCC §2.925,

(a) Each equipment covered in an application for equipment authorization shall bear a nameplate or label listing
the following:

(1) FCC Identifier consisting of the two elements in the exact order specified in §2.926. The FCC Identifier shall
be preceded by the term FCC ID in capital letters on a single line, and shall be of a type size large enough to be
legible without the aid of magnification.

Example: FCC ID: XXX123

Where: XXX—Grantee Code, 123—Equipment Product Code

As per FCC §15.19,
(a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or verification shall
be labeled as follows:
(3) All other devices shall bear the following statement in a conspicuous location on the device:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

(4) Where a device is constructed in two or more sections connected by wires and marketed together, the statement
specified above is required to be affixed only to the main control unit. If the EUT is integrated within another device then a
label affixed to the host shall also state, “Contains FCC ID: XXXXXX”

(5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a)
of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction
manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed.
However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device.


7.2       IC Label Requirements
As per IC RSP-100 Section3.1, the certification number shall appear as follows:

                                              IC: XXXXXX-YYYYYYYY

Where:
          The letters “IC:” indicate that this is an Innovation, Science and Economic Development Canada’s
           certification number, but they are not part of the certification number. XXXXXXYYYYYYYYYYY is
           the ISED certification number.
          XXXXXX is the CN assigned by Innovation, Science and Economic Development Canada. Newly
           assigned CNs will be made up of five numeric characters (e.g. “20001”) whereas existing CNs may
           consist of up to five numeric characters followed by an alphabetic character (e.g. “21A” or “15589J”).
          YYYYYYYYYYY is the Unique Product Number (UPN) assigned by the applicant, made up of a
           maximum of 11 alphanumeric characters.
          The CN and UPN are limited to capital alphabetic characters (A-Z) and numerals (0-9) only. The use of
           punctuation marks or other symbols, including “wildcard” characters, is not permitted.
          The HVIN may contain punctuation marks or symbols but they shall not represent any indeterminate
           (“wildcard”) characters.


Report Number: R1805318-249                               Page 24 of 27            FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                     FCC ID: OHKMCT915B, IC: 3367A-MCT915B


As per RSS-Gen §2.1 Equipment Labeling:

The application for equipment certification shall be submitted in accordance with Industry Canada’s Radio
Standards Procedure RSP-100, Radio Equipment Certification Procedure which sets out the requirements for
certification and labelling of radio apparatus. RSP-100 shall be used in conjunction with RSS-Gen and other
Radio Standards Specifications (RSSs) specifically applicable to the type of radio apparatus for which
certification is sought.


7.3    FCC ID & IC Label Contents and Location




Report Number: R1805318-249                       Page 25 of 27         FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                                     FCC ID: OHKMCT915B, IC: 3367A-MCT915B


8    Appendix B Test Setup and EUT Photos
Please see attachments:

                          Annex A – EUT Test Setup Photographs
                          Annex B – Internal Photographs
                          Annex C – External Photographs




Report Number: R1805318-249                       Page 26 of 27       FCC Part 15C/ISED RSS-210 Test Report


South Pacific Electronics Ltd                         FCC ID: OHKMCT915B, IC: 3367A-MCT915B


9    Appendix C (Informative) - A2LA Electrical Testing Certificate




                                --- END OF REPORT ---




Report Number: R1805318-249           Page 27 of 27       FCC Part 15C/ISED RSS-210 Test Report



Document Created: 2019-06-10 20:57:41
Document Modified: 2019-06-10 20:57:41

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC