Users Manual

FCC ID: ODL-P560

Users Manual

Download: PDF
FCCID_2602278

560 P Owner’s Guide 5.1 Speaker System

1

2

3

4

Thank you for purchasing Rockford Fosgate P560 5.1 Powered Speaker System. We hope it exceeds your expectations in sound quality. The P560 is designed to deliver superior sound with 5.1 theater quality sound for your movies, games, and music. We offer various methods of connectivity including Bluetooth, Optical, RCA, AUX, and the latest in gaming sound cards. So whatever audio player you have (i.e. mobile phone, gaming console, tablet, computer, TV, etc.), the P560 will be your go to system. Your system includes: 10 2 1 5 satellite speakers 1 2 Subwoofer 560 T- Owner’s Guide 5.1 Speaker System 1 3 3 Control console 4 IR remote 4 5 12" aux cable 9 6 5 sets of connection wire (7.6m / 25ft x 2 ; 4.6m / 15ft x 3) 7 3 x 3.5mm cables 6 8 RCA cable 8 5 7 9 2 x AAA Batteries 10 Owner’s guide with connection diagram CAUTION • Do not plug the power supply in until all connections are made. • Keep speakers away from sources of extreme heat such as stereo amplifiers, space heaters, stoves, heat vents, etc. • Do not wipe any part of the system with cleaning solvents such as furniture wax, bleach, benzene, acetone, or ammonia. Dolby® Digital Dolby Digital is the universal standard for 5.1 digital sound. Onboard 5.1 digital decoding enables detailed surround sound—from the roar of the crowd to the footsteps right behind you— in your Dolby Digital soundtracks. 5

Speaker Preparation For speaker preparation, we suggest you arrange your system similar to the diagram shown below. FL FR Subwoofer C RL RR • Front Satellite Speakers — Place the two front satellite speakers on opposite sides of your TV or computer monitor. Locate them equal distance from each other and adjust the angle so the speakers are facing you. • Rear Satellite Speakers — Place the two rear satellite speakers behind you (with similar distance apart as the front speakers). Then adjust the angle to face you. • Center Satellite Speaker — Place the center satellite speaker above or below your TV or computer monitor (Caution: do not put center satellite directly on top of TV or computer monitor). • Subwoofer – You can put the subwoofer anywhere in your room. To get the strongest bass, put your subwoofer near a wall, corner, or underneath a desk. Make sure that nothing is closer than 20cm to the driver or port tube because it will affect the sound. It is important to allow for enough ventilation around the subwoofer, we recommend 20cm . • Control Console – Place the console where it is easy to reach and make sure the IR receiver window is not blocked. 6

Speaker Connection 1 CONSOLE 2 LINE IN 3 OPTICAL IN FL / FR RL / RR 4 C / SW FL FR RL 5 RR C AC Power 6 Subwoofer back panel 1. Control Console connection port 2. Red/White (RCA) 3. Optical in (Digital input) 4. PC Sound card connections 5. Satellite output connection ports 6. AC power cord 7

Front Back BLUETOOTH INPUT AUX IN 1 PC IN 8 LINE IN OPTICAL FL EFFECT FR 9 C 2 RL RR SUB BASS DECODE 10 3D 3 2.1 11 BASS 12 7 13 14 6 4 5 POWER MUTE Control Console 1. Input selection: Use this button to switch between your audio source. (Optical, Line in, PC in, AUX in, Bluetooth) 2. Effect: Use this button to switch between 2.1 output or 5.1 output. 3. Bass: Press this button to adjust bass channel; when the BASS LED is on, you can adjust bass volume by rotating the knob. 4. Power: Master power on/off 5. Mute: Mute the entire system 6. Volume / level adjustment knob: Adjust master volume 7. IR remote sensor 8. Input selection indicator 9. Speaker output indicator 10. Decode indicator: LED will be on when Dolby Digital signal is detected. 11. Sound effect indicator: Either 2.1 output mode or 5.1 output mode. 12. Bass indicator: When LED is on you can adjust bass level. 13. Headphone output jack 14. AUX input jack 8

IR Remote Control 1 2 3 4 5 + + AAA Battery AAA Battery 6 - - 1. Input selection: Use this button to switch between your audio source. (Optical, Line in, PC in, AUX in, Bluetooth) 2. Effect: Use this button to switch between 2.1 output or 5.1 output. 3. Play: During Bluetooth connection, press this button to play or pause. Press and hold for 5 seconds to enter Bluetooth pairing mode. 4. Master volume: Up/Down 5. Mute the entire system 6. Master Power: On/Off Power On • Plug the subwoofer power cable into an electrical outlet. • Press Power on the Control Console to power on the speaker system. Caution: Make sure all connections are made first. 9

Audio Input Selection Bluetooth Input Connection • Press the “INPUT” button to switch the input until the “BLUETOOTH” LED lights up. • First time pairing; the P560 will automatically go into pairing mode. • Go to your Bluetooth device and select the device named “P560”. • If the system is turned off, it will automatically search for the latest connected device when turned back on. If the device cannot be found, it will enter into pairing mode. • If you want to pair another new device, you can press and hold the “PLAY” button for 5 seconds on the IR remote control to trigger the system into pairing mode. PC Sound Card Input Connection • There are three 3.5mm input jacks for true 5.1 PC Sound card on the rear panel of the subwoofer. Please check your sound card manual for the proper connections. • Press the “INPUT” button to switch the input until the “PC IN” LED lights up. Line In Input Connection • Making connection with your speaker to any AV system, game console, etc. using the RCA input on the rear panel of subwoofer. • Press the “INPUT” button to switch the input until the “LINE IN” LED lights up. Optical Input Connection • Use an optical cable to connect your device to the optical port on the rear panel of the subwoofer. (Optical cable is not included) • Press the “INPUT” button to switch the input until the “OPTICAL” LED lights up. AUX IN Input Connection • You can connect any laptop, tablet, smartphone, MP3 player, etc. by using a 3.5mm AUX cable and plugging it into the AUX jack on the rear side of the control console. • Press the “INPUT” button to switch the input until the “AUX IN” LED lights up. Adjust Volume Rotate the volume knob to adjust the entire system’s volume. The LED bar will turn into a volume status bar when you start to rotate the knob. It will resume the display status after adjustments are made. Adjust Bass Volume Press “BASS” button and the “BASS” LED will turn on. The LED bar will turn into bass level status bar. Adjust the bass volume by rotating the knob. It will resume the display status after adjustments are made. 10

TROUBLE SHOOTING SYMPTOM SOLUTION Power button is not turned on. Press the power button back and forth and check for the blue LED indicator light to come on. Speaker System Will Verify the AC power cord is plugged into the wall outlet. Not Power Check if the wall outlet or power strip you are using is actually getting power, i.e. not a switched outlet. Verify the speaker is getting power. Check the steps above. Speaker Does Not Produce Sound Verify that all cables are plugged into the correct jacks or that the Bluetooth is paired correctly. Turn the speaker volume down by 25% or 50%. Adjust the bass volume control to test for maximum and minimum Sound Is Distorted output. You may also need to move the subwoofer either closer or farther away from a wall or corner to affect the sound performance. Adjust the sound source’s master volume control by balancing the volume until it’s centered. BLUETOOTH TROUBLE SHOOTING Can’t connect for the first time 1. Turn off the speaker system by pressing the POWER button. 2. Check your Bluetooth source device and make sure you have found the section that allows you to see nearby Bluetooth products. If you see the P560 on the list, but cannot connect, you may need to search again. To start fresh with your Bluetooth device, select “Forget this device”, and remove the P560 from the list. You may need to turn off the Bluetooth function on your device to fully clear your list. 3. Turn on the speaker system again by pressing the POWER button and select Bluetooth as input by pressing the INPUT button until BLUETOOTH LED is on; the LED will be blinking rapidly showing that the speaker system is in pairing mode. 4. Return to your source device, and re-enable the Bluetooth function. Look for the P560 speakers to show back up on the.list. 5. Select the device on the list and the BLUETOOTH LED will become solid if it is connected successfully. Can’t connect when returning 1. If the P560 does not automatically connect back with your Bluetooth-enabled device, you may need to physically go into your device’s Bluetooth settings and select “P560” to reconnect. 2. If the above step does not work, see steps 1-5 in the “Can’t connect for the first time” section above. Audio is choppy, has erratic static, or keeps disconnecting 1. Be sure to check the room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means your best results will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with a lot of wireless electronics, routers, etc, may affect the quality of sound, connection, or connection consistency. 2. Check for obstructions, walls, or other objects that might impede the Bluetooth signal. 3. Try returning to the source device to a closer proximity with your speakers. Still can’t connect 1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means your best result will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with lost of wireless electronics, wi-fi routers, radio transmitters, etc, may affect your ability to pair. 2. Check to see if any other devices are already connected to the P560. The speakers can only pair with one device at a time. If you need to unpair, choose “Forget this device” from your source. Then follow Bluetooth Input Connections on page #11. 3. Check the battery life on your source device and charge if necessary. Most devices operate best when charged above 20% minimum battery level. ADDITIONAL SUPPORT The latest updated video tutorials, FAQ, and product feature specifications are available online 24/7 at http://cyberacoustics.com/P560 or Technical support is available at 360-883-0333, M-F 8am to 5pm PST. 11

Performance Specifications A: Watts: 530W RMS Satellites – 75W watts/ch x 5 @ 8 ohm – 10% THD Subwoofer – 155Watts @ 4 ohm – 10% THD B: Speakers size: Satellites – 4.3” (W) x 3.7” (D) x 7.0” (H) Center Satellites – 6.5” (W) x 3.7” (D) x 4.0” (H) Subwoofer – 11” (W) x 13” (D) x 11.5” (H) C: Drivers size: 3” dynamic satellite drivers 8” poly-carbon high excursion sub D: Frequency response: 28Hz – 20KHz FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body Wall Mounting You can mount your satellite speakers with the appropriate hardware (not included). • Do not mount the speakers on thin plywood or on a wall with a soft surface material. The speakers may fall, possibly damaging the speakers or causing personal injury. • Do not affix the speakers to a wall using nails, adhesives, or unstable hardware. Long-term use and vibration may cause the speakers to fall. • To avoid accidents resulting from tripping over loose speaker cables, affix the cables to the wall and floor. • Mount the speakers in a wall location that will be less likely to result in injury to an individual’s head or property damage. Warranty For warranty information and registration, please go to www.cyberacoustics.com/rockford 12


Document Created: 2015-03-17 17:27:47
Document Modified: 2015-03-17 17:27:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC